RaceDayQuads
RaceDayQuads 300W Portable Mini Heat Gun - White
Portable lightweight handheld electric hot air gun perfect for your heat shrink tubing! Check out our ever growing selection of tools and building supplies! Features The nozzle can reach 200°C/392°F in seconds. Made of high quality stainless steel inside and ABS plastic outside. Vents in both sides of the tail to reduce internal temps and extend lifespan. Built in folding rest Two pin US plug and 1m / 3ft cable Even a great substitute for your toaster oven! Includes 1x Portable Mini Heatgun
$12.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 90 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes. Check out all our 3D printed accessories! Includes 1x 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU
$1.99
RaceDayQuads Antenna Holder/Mount for Standoff - 3D Printed TPU - Choose Your Color
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x Antenna Holder/Mount for Standoff - 3D Printed TPU
$1.99
RaceDayQuads Armattan Odonata 1.6" Micro Frame Kit
Introducing the Armattan Odonata, the smallest FPV frame we have ever produced. But do not let the small size fool you. This model was designed and put through testing phases by a young engineering student, pilot and designer based in New York. His name is Kai Lin, aka Craftedkwads. We figured it was best to let him describe this frame so here's what he has to say about it. The Odonata is a nano drone that fits in your pocket, rips like a boss, and hums like a dragonfly (true to its namesake). Fits through the tiniest of gaps, and makes worlds out of small spots. 1.5mm thick carbon fiber plates make for great durability, and the custom delrin standoffs are almost half the density of the standard aluminum ones (while retaining the needed strength), making the Odonata one of the lightest frames on the market, in a class where weight is the #1 priority. Fully thought out, the Odonata offers proper motor protection, camera protection, and build durability. A top mounted battery makes for easy access, and optimal flight characteristics. The Odonata captures the essence of whoops and boosts their performance, durability, and ease of use. With a nearly identical wheelbase, the Odonata has a not-so-identical amount of performance, versatility and fun, however. It's a better flyer. For those of you who can print your own parts, you can find the .stl files here. Check out our other Micro frames, as well as the rest of our Armattan selection! Armattan Lite Disclaimer Armattan Lite frames are not lifetime warrantied; they are built for a different purpose. They will, however, be priced accordingly (read: very competitively). Armattan Lite will offer spare parts for cheap and continue to support one of the original visions of the company; to keep guys in the air without milking them for replacements. Includes 1x 1.5mm Main Plate 1x 1.5mm Top Plate 8x M2 5mm Iron Cup Head Bolts 4x M2 10mm Iron Cup Head Bolts 8x M2 Nylon Nuts 4x Delrin M2 15mm Standoff 1x Cam Mount for Foxeer Razer Pico 4x Rubber Bands 1x Antenna Tube 2x Landing Dogbone pads
$18.75
RaceDayQuads AtomRC PNP Dolphin Plane - Choose Version
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground. The AtomRC PNP Dolphin Plane is a durable lightweight PNP plane with molded EPP embedded with carbon fiber tubes. This has everything you need to fly, just add an RX and and FPV system. Features include a detachable wings and nose, fuselage protector, integrated GoPro mount, and other cool features! Unlike most PNP planes, you will have to install the included electronics. Find the Kit version here! Browse the rest of our Wing Gear! Features 845mm wingspan EPP molded , embedded with carbon fiber tubes, durable and lightweight. Detachable wing, easy to transport. Carbon fiber tubes help keep wings rigid during flight V tail design for added stability Detachable nosecone for GoPro mounting Air inlet and outlet for FPV gear cooling. Compatible with GoPro Hero 5-7. Pre-installed wing and fuselage protector for durability Movable battery slot for “CG” adjustment. Air inlet and outlet for FPV gear cooling. Specifications Wingspan: 845mm Length: 710mm Dimension: 660*225*135mm Propeller recommend: 5-6 inch Battery recommend : 4S 1300-2200mah Includes 1x Dolphin KIT 1x 2306 Motor 1x ATOMRC Exceed 9g Servo Diagram
$129.99
RaceDayQuads BayckRC 2.4GHz RC Mini Antenna For ELRS Receiver - U.FL - Choose Color
Choose between white, red, and blue for the color of your ELRS antenna. Every last detail counts when it comes to styling up your quad, including your ELRS antenna! Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories, as well as all our BayckRC Products! Specifications Frequency or Freq. Bandwidth: 2.4GHz Cable Length: 35mm Connector: U.FL / IPEX-1 Includes 1x BayckRC 2.4GHz RC Mini Antenna For ELRS Receiver - Choose Color
$1.30
RaceDayQuads BetaFPV Beta75X V2 Whoop Frame - Choose Your Color
Compared with the Beta75X frame, the Beta75X V2 frame only weighs 5.6g, It is lighter and the gravity center of the V2 frame is more concentrated. Increased the height of the frame loop, props can be completely wrapped by the protective ring. A better choice for a 75mm brushless whoop drone. What's more, the Beta75X V2 Frame is specially designed with two different motor mounting holes that support 1102 and 1103 brushless motors. Check out all our whoop frames & accessories and all our BetaFPV gear! Features The Beta75X V2 frame only weighs 5.6g, it is lighter and the whole drone’s gravity center more concentrated than the Beta75X V1. Meanwhile, the motor mount position uses a quadrilateral stretch structure, makes the frame more durable and stable. Increased the height of the frame loop, props are completely wrapped by the protective ring, more effectively protected the propellers. Designed two different motor mounting holes that support 1102 and 1103 brushless motors at the same time. With a 26mm*26mm FC mounting columns can match whoop style flight controllers like F4 AIO 12A FC. The battery slot fits BETAFPV 300mAh 2S and 300mAh 3S-S battery. Specifications Diagonal motor to motor distance: 75mm Motor mounting hole: for both 3 and 4 hole motors FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern Battery slot size: 6.8x16.1mm Material: Plastic Weight: 5.6g Includes 1x BetaFPV Beta75X V2 Whoop Frame - Choose Your Color
$4.99
RaceDayQuads BetaFPV Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
Take your drone racing to the next level with BetaFPV's Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack. With a 1.5mm shaft and 3-blade design, you'll enjoy increased power and quicker speed. Make sure you're always ready to fly with this reliable and efficient prop. The 3-Blade props feature high efficiency and are precise in operation for freestyle. Check out all our Micro Props and BetaFPV gear, as well as all of our Gemfan products! Specification Color: White, Blue, Orange, and Clear Gray Product material: Clear Plastic Inner diameter: 1.0mm Shaft Weight: 1.23g (4pcs) Includes 1x BetaFPV Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
$2.49
RaceDayQuads BetaFPV Gemfan 1815 Tri-Blade 45mm Micro/Whoop Prop 4 Pack (1.5mm Shaft) - Choose Your Color
Take your drone racing to the next level with BetaFPV's Gemfan 1815 Tri-Blade 45mm Micro/Whoop Prop 4 Pack. With a 1.5mm shaft and 3-blade design, you'll enjoy increased power and quicker speed. Make sure you're always ready to fly with this reliable and efficient prop. The 3-Blade props give more power and faster speed for racing. Check out all our Micro Props and BetaFPV gear, as well as all of our Gemfan products! Specifications Material: PC Weight: 1.69g/set (3-Blade) Blades: 2-Blade/3-Blade Pitch: 1.5 inch Propeller Diameter: 45mm Shaft: 1.5mm Includes 1x BetaFPV Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 4 Pack (1.5mm Shaft) - Choose Your Color
$2.49
RaceDayQuads BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color
Be bold and brave with the BetaFPV Meteor75 Pro Whoop Frame! Choose from seven vibrant colors. Meteor75 Pro is durable, lightweight (7.73g) and the motor holder is strong for stable flying. Uses 1102/0802SE Triangle mount motors and accommodates a larger 1S batteries. Perfect for 45mm props; increases thrust for 1S whoops, with HD digital VTX. Check out all our whoop frames & accessories and all our BetaFPV gear! Features Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g. The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802 Brushless Motors. The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S Battery The frame is perfect for 45mm propellers. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX. Specification Item: Meteor75 Pro Brushless Whoop Frame Material: PP Wheelbase: 80.8mm Weight: 7.73g Color: Black/Blue/Cyan/Yellow/Orange/White/Red Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802 Brushless Motors FC mounting hole: 26x26mm, F4 1S 5A FC Includes 1x BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color
$4.99
RaceDayQuads BetaFPV Meteor75 Whoop Frame - Choose Color
Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable. Check out all our whoop frames & accessories and all our BetaFPV gear! Features Meteor75 frame is ultralight only 5.68g, light but durable enough. The motor mount position uses a quadrilateral stretch structure, the frame is more durable and stable. The height of the frame has been adjusted, the lowest point of the frame is the motor position, the battery can be protected while the drone is landing. It also increased the height of the frame loop to protect the propeller better. Designed two different motor mounting holes that support 0603, 0802 and 1102 brushless motors at the same time. With a 26mm*26mm FC mounting columns can match whoop style FC. Specification Material: Plastic Size: 75mm Weight: 5.68/pc Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern Includes 1x BetaFPV Meteor75 Whoop Frame
$4.99
RaceDayQuads BetaFPV Micro 2022 Toothpick/Whoop Canopy - Choose Your Color
The BETAFPV Micro 2022 Canopy comes with a new injection molding technique that brings durability and flexibility to the canopy, which is a great choice for micro cameras with 20° or 30° lenses. The hollow-out design help reduces the influence of heat on electronic parts and this canopy is suitable for BETAFPV Meteor Series. Check out all our whoop frames & accessories and our BetaFPV gear! Features Made with injection molding, this canopy is more durable, anti-scratch and heat-resistant, providing good protection for your electronics. Best replacement for the old generation of canopy on all whoop drones with micro cameras. Thoughtful designs for 1/3'' lens camera like C02 Pro camera and 1/4'' lens camera like C02 camera, compatible with all whoop frames like Beta65S frame, Beta65S Lite frame, Beta85 Pro 2 frame, Meteor65 frame and Meteor75 frame Light weight 1.60g (with camera mount) / 1.93g (with decorations). And 6 colors in White/Black/Blue/Pink/Green/Orange Specifications Material: PP Tilt: 20/30° Weight: 1.60g (with camera mount) / 1.93g (with decorations) Color: Black/White/Blue/Orange/Pink/Cyan BetFPV Compatible Frames: Beta65S/Meteor65/ Meteor75 Includes 1 x Micro Canopy 2022 (Black/White/Blue/Orange/Pink/Cyan) 1 x 20° Lens Camera Mount for C02 1 x 20° Lens Camera Mount 1 x 30° Lens Camera Mount 3 x Decorative Parts 4 x M1.4x3 Screws 4 x M1.4x4 Screws
$3.99
RaceDayQuads BetaFPV Micro Air Whoop Canopy - Choose Your Color
To elevate the flying experience, DIY enthusiasts have consistently prioritized the reduction of weight for the attainment of ultra-light structure for 1S whoop drones. Consequently, we have devised an exceedingly light Micro Air Canopy, weighing a mere 0.74g, that not only facilitates camera angle adjustment from 25° to 50° but also has antenna mounts, incorporated at the tail. If your goal is to optimize canopy functionality while minimizing weight to obtain a Sub18g 65mm Whoop, this option stands as the definitive choice. Check out all our whoop frames & accessories and our BetaFPV gear! Features With a mere weight of 0.74g, the canopy boasts a simplistic yet durable structure, ensuring effortless installation. It stands as the premier pick for ultra-light small whoop drones. This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano-sized Analog and HD Digital cameras that are widely sought after in the market. Positioned at the canopy's tail, reserved 4 antenna mounts enable seamless adjustment of the camera angle, offering a versatile range spanning from 25° to 50°, capturing the optimal image. More Compatibility Micro Air Canopy is the ideal option for constructing or enhancing ultra-light whoop drones featuring HD Digital VTX or Analog VTX, owing to its exceptional compatibility. This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano Analog and HD Digital cameras. So Micro Air Canopy provides full support for the C03 Camera, C02 Camera, Avatar HD Lite Camera, ANT Lite Camera, and other cameras possessing a lens diameter of 9-10mm. Infinite Personalization We provide diverse color options for the Micro Air Canopy, enabling greater freedom for personality. This allows for aligning or color clashing the canopy color with your drone's theme. And equipped with our various colors of Meteor65 Air Brushless Whoop Frame adds flexibility, and agility during flight. Your drone will capture people's attention and showcase your unique personality and creativity. Specifications Item: Micro Air Canopy Material: PP Tilt: 25°~50° (Adjustable) Weight: 0.74g (Including one Camera Fixed Screw) Color: Black, White, Transparent White, Transparent Blue, Transparent Purple, Transparent Green Includes 1x BetaFPV Micro Air Whoop Canopy - Choose Your Color
$2.99
RaceDayQuads BetaFPV Replacement Shell for ELRS Micro TX - Choose Color
Did you crack the case or simply want to change the look of your BetaFPV ExpressLRS Micro TX? Now you can with this white replacement shell! Check out our Express LRS collection and all our BetaFPV products! Features Made of high-quality plastic material. It is very durable and stable Upgraded case designed. The USB port size is 6.5*13.5mm, which is compatible with 90% of the known USB Type-C cables Specifications Case Weight: 20g USB Port Dimensions: 6.5*13.5mm USB Port: Type-C Includes 1x BetaFPV Replacement Shell for ELRS Micro TX
$3.99
RaceDayQuads CLRacing Race LED/PCB Wire 4 Pack - Choose Your Color and Size
NOTE: PICTURES ARE FROM THE OLDER VERSION. UPDATED PICTURES INCOMING Similar to the RaceWire, this product from CLRacing offers protection of your motor's wires while simultaneously making your quad look fantastic with 6 bright LEDs. Available in White, Red, Green, Purple, Yellow and Blue, the CLRacing LED Race Wire has colors to suit any quad! Note, the listing is for 4pcs. CLRacing Race LEDs Specs: Weight: 1.1g LED Quantity: 6 Size: 9x35x1.6mm Lipo Input: 3-6S Color: Red, White, Blue, Green Unit Quantity: 4pc
$4.99
RaceDayQuads Foxeer Lollipop V4 5.8GHz Stubby RP-SMA Antenna 2 Pack - Choose Version
The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon! These are RP-SMA antennas. They're compatible with DJI MMCX Straight and MMCX Elbow to RP-SMA VTX Cables. We carry the standard SMA version as well. Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High Quality Oxidation Resistant Materials Specifications Center Frequency: 5.7GHz Bandwidth: 5.5-6.0GHz Polarization: RHCP and LHCP Gain: 2.6Dbi Axial Ratio: Close to 1 VSWR: < 1.07 (at center frequency) Radiation Efficiency: 98% Shell Material: PC + ABS Antenna Dimensions: Φ17x23mm Connection: RP-SMA Weight: 5g Includes 2x Foxeer Lollipop V4 5.8GHz Stubby RP-SMA Antenna
$19.89
RaceDayQuads Foxeer T-Rex Micro 1500TVL CMOS 4:3/16:9 PAL/NTSC FPV Camera (1.7mm) - Choose Your Color
The Foxeer TRex Micro is a 19x19mm FPV camera by Foxeer that features a 2MP CMOS sensor, 1500TVL resolution, 6ms latency, NTSC/PAL switchable, auto white balance, and many other cool features! Check out our selection of FPV cameras and our ever growing selection of Foxeer products. Specifications Sensor Type CMOS 2MP Scale: 4:3/16:9 Switchable Tv System: PAL/NTSC Switchable Resolution: 1500TVL FOV 4:3: FOV-H: 120° FOV-D:150° FOV 16:9: FOV-H: 155° FOV-D:175° Shutter Speed: Auto Flip: Up, Down, Left and Right Video Output: CVBS Analog Signal Latency: Low to 2ms Minimum Illumination: 0.001Lux White Balance: Auto DNR: 3DNR WDR: 110dB DAY/NIGHT: EXT/Auto/Color/B&W Flight OSD: Voltage/Cam Title/Time Input Voltage: 4.5V~16V Power Consumption: 115mA±15%@DC12V,270mA±15%@DC5V Language: ENGLISH /中文 Working Temperature: -10°~50°C RH90% MAX Working Humidity: 20~80% Storage Temperature: -20°~70°C Dimension: 19*19mm Weight: 8.6g(Exclude cable) Includes 1x Foxeer T Rex Micro FPV Camera 1500TVL CMOS 16:9/4:3 PAL/NTSC Plug - Choose Your Color
$54.99
RaceDayQuads Foxeer Toothless 2 Micro Starlight 1200TVL CMOS 4:3/16:9 PAL/NTSC FPV Camera (1.7mm) - Choose Your Color
The Toothless is just got an upgrade! Now featuring a switchable FoV! Available in Nano Standard, Nano Starlight, Micro & Mini/Full!Check out all our micro FPV cameras and all our Foxeer gear! Features Switchable Narrow/Wide FoV to suit freestyle quads or fixed wing flight Huge 1/2" sensor grabs more light for better image quality and low light flying True all weather, all hours camera. Fly day or night, fog or blazing sunlight Supports OSD control from your FC or remote control joystick. Specifications Horizontal Resolution 1200TVL Aspect Ratio: 4:3 / 16:9 Switchable Signal System NTSC/PAL Switchable Focal Length: M12 1.7mm Input Voltage 4.6-20V Dimensions: 19x19mm Weight: 8.5g Includes 1x Foxeer Toothless 2 Micro FPV Camera 1x OSD Board 1x Screw Set 1x 2 Pin OSD Cable 1x Servo Cable / TBS Unify VTX Cable (150mm) 1x Manual
$39.99
RaceDayQuads Gemfan Cinelifter 7035 7x3.5x3 Tri-Blade 7" Prop 4 Pack - Choose Your Color
High efficiency tri-blade props, perfect for those larger 7" cinematic builds! They accept 5mm shafts as well as 1.5mm and 2mm T mount shafts with a provided adapter! Checkout out the rest of our 7" props and all our Gemfan products! Specifications Material: PC Pitch: 3.5in Prop Diameter: 178.6mm Center Thickness: 7mm Center Hole Diameter: 5mm Weight: 6.5g Includes 4x Gemfan Cinelifter 7035-3 7x3.5x3 Tri-Blade 7" Prop (2CW, 2CCW)
$3.69
RaceDayQuads GoPro Session Armor - 3D Printed TPU - Choose Your Color
Keep your session safe and sound with this 3d printed armor. We also offer a ND filter for those who really want to pimp out that HD footage! Check out all our 3D printed accessories! Includes 1x GoPro Session Armor - 3D Printed TPU - Choose Your Color
$9.99
RaceDayQuads HappyModel Larva X FC / VTX Insulator Spacer - 3D Printed TPU - Choose Your Color
This little 3D printed insulator is designed to go between the FC and VTX on the Happymodel Larva to allow more airflow and ease stack assembly. Check out the rest of our Larva Parts, 3D printed accessories and HappyModel gear! Includes 1x Happymodel Larva FC / VTX Insulator
$0.99
RaceDayQuads HappyModel V4 75mm Whoop Frame For Moblite7 / Mobula7 / Mobula7 1S - Choose Color
The new V4 frame for the Mobula 7, Moblite 7, Mobula 7 1S and Mobula 7 1S HD. This revision upgrades the chassis to be more rugged with a lower mounting point for flight controllers, and not block the USB port. Compared to the V2 frame, the weight has increased by 1g, but it is more resistant to falls and offers better stability. Check out the rest of our Happymodel gear, Our Moblite 7 collection, and our Mobula 7 collection as well! Specifications Wheelbase: 75mm Maximum Propeller size: 40mm Color: White or Black Weight: 5.4g Includes 1x HappyModel V4 75mm Frame For Moblite 7 / Mobula 7 / Mobula 7 1S - Choose Color
$3.50
RaceDayQuads HQ Prop Juicy Prop J37 4.9" Prop 4 Pack - Choose Your Color
The new HQ Juicy J37 props are a perfect namesake. The flow you can achieve can only be described as one of the juiciest experiences you can have. Check out the rest of our 5" props, and all our HQ Prop selections! Specifications Diameter: 4.9in Φ Pitch: 3.7in Blades: 3 Material: Polycarbonate Hub Thickness: 6mm Shaft Hole: 5mm Weight: 3.4g Includes 4x HQ Prop Juicy Prop J37 4.9" Prop
$3.49
RaceDayQuads ImpulseRC Apex Race Wire 4 Pack - Choose Your Color
Race Wire that was designed to perfectly fit over the arms of the ImpulseRC Apex. Check out all our Apex parts & accessories, and our entire ImpulseRC selection! Includes 4x ImpulseRC Apex Race Wire
$5.99
RaceDayQuads ISDT Q6 Nano 200W 8A 2-6S DC Smart Charger - Choose Your Color
Check out all our chargers & charging accessories, as well as our ISDT selection! Features ARM Cortex-M4. 20x increased speed. 2.4 inch IPS display with automatic brightness. High-speed ball bearing fan increases cooling performance by 300%. ARM 32-bit high-speed processor. Update firmware with your PC. Specification Input voltage: DC 7-32V Maximum input current: 9A Output voltage: 0-30V Charging current: 0.1-8.0A Discharge current: 0.1-3.0A Maximum load capacity: 200 W Max. Discharge capacity: 5 W Compensation current: 0.8A / cell Balance cells: 2-6S Battery Type: LiFe, Lilon, LiPo, LiHV (1-6S); NiMH, Cd (1-16S); Pb (1-12S) Display: 2.4 inch 320 x 240 IPS LCD Operating temperature: 0-40 °C Storage temperature: -20 - 60 °C. Dimensions: 72 x 72 x 32 mm Weight: 119g Languages: English, German, French, Spanish, Japanese, Traditional Chinese, Simplified Chinese Includes 1x ISDT Q6 Nano 200W 8A DC 2-6S Smart Charger - Choose Your Color
$39.99
RaceDayQuads MenaceRC COB LED 4 Pack - Choose Color
These RC LEDs are perfect to be seen racing, for freestyle flying, lighting up your aircraft and also excellent for creative light painting at night! Check out all our LEDs, and all our and our Menace selection! Specifications Weight: 1.5g Size: 60mm x 8mm x 1.9mm Lipo Input: 4-6S Color Choices: Red, White, Blue, Green (select one) Unit Quantity: 4pc Includes 4x MenaceRC COB LED 4 Pack
$6.99
RaceDayQuads Meteor65 Air Brushless Whoop Frame - Choose Your Color
The Meteor65 frame has been upgraded to the Meteor65 Air Brushless Whoop Frame, reducing the minimum weight to an impressive 2.67 grams. This remarkable frame features enhanced strength and durability plus a new motor fixed slot and optimized low profile design, making it the ultimate choice for those seeking a Sub18g 65mm 1S Whoop drone with an ultra-light structure. Check out all our whoop frames & accessories and all our BetaFPV gear! Features Weighing a mere 2.67g, this Meteor65 Air Brushless Whoop Frame exemplifies exceptional ultra-light structure while maintaining remarkable durability and crash resistance. A groundbreaking addition to the 65mm frame, the inclusion of motor fixed slots enhances the convenience and stability of the motor installation.The low profile design effectively concentrates the whoop drone's gravity, optimizing its flight performance. The deliberate increase in whoop duct diameter effectively mitigates the risk of propeller strikes, ensuring seamless compatibility with 0702 motors and 0802 motors, and 31mm propellers. ComparisonBased on the Meteor65 frame, we have optimized and upgraded in many aspects, the details are as follows. The duct diameter is enlarged from 32mm to 34.9mm, which improves compatibility and avoids propeller strikes. The weight is reduced from 3.14g to 2.67g, making the flight more flexible, exemplifying the exceptional ultra-light structure of the 1S whoop drone. Both frames feature the same materials and durability. With the low profile of frame, the drone's gravity center is more concentrated and improves the sense of compactness. Motor Fixed SlotIn a groundbreaking development, the Meteor65 Air Brushless Whoop Frame has been added firstly with motor fixed slots, facilitating a more expedient and steadfast motor installation process. While misalignment has no measurable effect on motor efficiency, correct shaft alignment ensures the smooth, efficient transmission of power from the motor to the flight controller, reduces mechanical stress, and minimizes power wastage. For advanced pilots who have strict requirements for assembling the ultra-light 1S whoop drone, this new design undoubtedly adds the finishing touch. Endless PersonalizationWe enhance frame structure design and also provide diverse color options for drone frames, enabling greater freedom for choice. This allows for aligning or color clashing the frame color with your drone's theme. And equipped with our various colors of ultra-light Micro Air Canopy adds more possibility of capturing the optimal image. Your drone will capture people's attention and showcase your unique personality and creativity. Micro Air CanopyWe also have devised an exceedingly light Micro Air Canopy, weighing a mere 0.74g, that not only facilitates camera angle adjustment from 25° to 50° but also has antenna mounts, incorporated at the tail. If your goal is to optimize canopy functionality while minimizing weight to obtain a Sub18g 65mm Whoop, this option stands as the definitive choice. Specifications Item: Meteor65 Air Brushless Whoop Frame Material: PP Weight: 2.67g Wheelbase: 65mm Motor Mounting: 3-M1.4-6.6mm Flight Control Installation Hole: 26×26mm Battery Slot Size: 11.6×6.0mm Color: Black, White, Transparent White, Transparent Blue, Transparent Purple, Transparent Green Includes 1x Meteor65 Air Brushless Whoop Frame - Choose Your Color
$4.99
RaceDayQuads Motor Soft Mount 4 Pack - 3D Printed TPU - Choose Your Color
Dampen motor vibrations with these 3D printed TPU FPV motor soft mounts. Placing these between your motor and frame will reduce the vibrations which make it to your flight controller. That, in turn, will increase flight performance. Able to fit all sold stator sizes and fit all of our 16x16mm and 19x19mm bolt pattern motors. Check out all our 3D printed accessories! Includes 1x Motor Soft Mount 4 Pack - 3D Printed TPU - Choose Your Color
$2.99
RaceDayQuads NewBeeDrone 65mm Cockroach Brushless V3 Frame Whoop Frame - Choose Color
Introducing the V3 of the Cockroach from NewBeeDrone! See what they have to say about their new upgraded whoop frame! The groundbreaking Cockroach True65 Super-Durable Brushless Frame, a revolutionary advancement in design and performance for Tiny Whoop style quads. Building upon our expertise and success with previous models, we have surpassed all expectations to create the market's lightest True65 size whoop frame, weighing in at an astonishing 2.8g, while maintaining exceptional strength and durability.Taking innovation to new heights, we have integrated a dual flight controller mounting system, inspired by the popular Cockroach75 frame. Now, not only can you mount a flight controller, but also a digital vtx on the frame, providing unparalleled control and compatibility options.Our dedicated team of engineers left no stone unturned in perfecting every detail of this frame. Utilizing high precision molds, we have achieved best-in-class detailing, setting an industry standard that surpasses both our previous versions and competitors' products.With its Traditional Looks and Geometry, you can rely on the familiar flight characteristics you love, while enjoying seamless compatibility with the Beebrain and most other popular flight controllers.But there's even more - we've prioritized ease of use and affordability. Meticulous fine-tuning of key tolerances ensures hassle-free installation and removal, making it a breeze for you to get back to flying.Crafted from a special Polypropylene material, this frame strikes the perfect balance between lightweight and durable. Struts and essential support components have undergone a complete redesign to optimize stress distribution during crashes and falls, guaranteeing that your quad can withstand the toughest challenges.Experience the Cockroach True65 Super-Durable Brushless Frame, where innovation meets practicality, and performance meets affordability. Unleash the full potential of your Tiny Whoop style quad with the market's best frame, meticulously crafted to elevate your flying experience to new heights. Configuration:This frame can be used with or without the carbon fiber base.When used with the carbon fiber base (weighing around 1g, bringing the total weight with the frame to 3.8g), it exhibits significantly less frame resonance and noise, making it ideal for freestyle and normal flying. For racers seeking the lightest setup, removing the carbon fiber frame shaves off weight, ensuring an agile and nimble flight experience. Check out the rest of our micro frames as well as the rest of our NewBeeDrone selection. Features All NewBeeDrone Cockroach Frames are eligible for unlimited replacements. Find out more information here. Specifications Size: True 65mm frame Material: Polypropylene material Weight: 2.8g Flight Controller Mount: 25.5x25.5 whoop size flight controller (BeeBrain) x2 (Top and bottom) Motor Mount: Tri-screw lock base with M1.4 hole Includes 1x NewBeeDrone 65mm Cockroach Brushless V3 Frame Whoop Frame - Choose Color
$4.99
RaceDayQuads ORT Micro Vee 5.8GHz U.FL Antenna - Linear - Choose Your Color and Length
The lightest, smallest and most affordable antenna from ORT! Tired of getting mediocre performance from your default antenna AIO micro camera VTX? Try our Micro Vee 5.8GHz! Fine-tuned Vee antenna for your micro or light quad build, covering from 5500~6000MHz will works great on ALL 5.8GHz channel! Weight only ~0.3gram (will get lighter if you don’t use the U.fl connector, just cut the length as desire and won’t affect performance), and only cost you a dime. It will significantly improve your VTX signal penetration and won’t limit your flying with its light weight. Good for 65mm brushed quad or even 3" micro quad. Give it a try!Check out all our 5.8GHz VTX antennas all our ORT antennas! Specifications Frequency Range : 5500 ~ 6000 MHz Gain : 2.2dbic Polarization : Linear SWR/S11 : < 1:1.5 Gain Pattern : Omnidirectional (360 coverage) Connector Type : U.FL (3mm) Cable : 5cm Flexible 1.13mm Weight : ~0.3 Gram Includes 1x O.R.T. Micro Vee 5.8GHz U.FL Antenna - Linear
$6.99
RaceDayQuads Quadifier Baby Diamondback 3.5" Arm Guard Skids 3D Printed TPU - Choose Your Color
Grab a set of white, red, or blue arm guards and skids for extra protection and aesthetic on your quad! Be sure to check out our other Quadifier parts, and all our Quadifier products! Check out all our 3D printed accessories! Includes 1x Quadifier Baby Diamondback 3.5" Arm Guard Skids 3D Printed TPU - Choose Your Color 4x Skids 4x Arm Guards
$8.99
RaceDayQuads Quadifier Diamondback 5" Arm Guard and Skids 3D Printed TPU - Choose Your Color
Grab a set of white, red, or blue arm guards and skids for extra protection and aesthetic on your quad! Be sure to check out our other Quadifier parts, and all our Quadifier products! Check out all our 3D printed accessories! Includes 1x Quadifier Diamondback 5" Arm Guard and Skids 3D Printed TPU - Choose Your Color 4x Skids 4x Arm Guards
$9.99
RaceDayQuads Quadifier Mamba 3" Arm Guards 3D Printed TPU - Choose Your Color
Grab a set of white, red, or blue arm guards for extra protection and aesthetic on your quad! Be sure to check out our other Quadifier parts, and all our Quadifier products! Check out all our 3D printed accessories! Includes 1x Quadifier Mamba 3" Arm Guards 3D Printed TPU - Choose Your Color 4x Arm Guard
$4.99
RaceDayQuads Quadifier Mamba Racing 3" Micro Frame Kit
The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Be sure to check out all our micro frames, and all our Quadifier products! Features Designed for 20x20 stacks Stretch X for more efficient flight 3.5mm unibody bottom plate 2mm top plate Fits only nano 14x14 size cameras Specification Stack Mounting: 20x20 FPV Camera Mount: 14mm Micro cam Motor Mount Pattern: 9x9 M2 ,12x12 M2 Main Plate Thickness: 3.5mm Frame Shape: Slight Stretched X Motor to Motor: 160mm Arm Thickness: 3.5mm Frame Weight With TPU: 30g Includes 1x Quadifier Mamba Racing 3" Micro Frame Kit 1x TPU Kit
$29.99
RaceDayQuads RadioMaster LED Gimbal Shroud Kit for TX16S or Boxer - Choose Color
Stand out from other pilots with these LED Gimbal shrouds for your TX16S transmitter or Boxer transmitter. With a simple installation process, this is one of the easiest and best looking mods you can do to your radio! Check out the rest of our RadioMaster selection! Includes 1x RadioMaster LED Gimbal Shroud Kit for TX16S or Boxer
$14.99
RaceDayQuads RDQ 1Kg Spool TPU 95A 1.75mm Filament - Choose Color
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. For all of your FPV 3D printing needs, we bring you RDQ TPU! With RDQ TPU you can expect the highest quality, rivaling top brands like Sainsmart. All 3D parts on our website that we print ourselves are printed with RDQ TPU, because reliability and durability are of the utmost importance to us and our fellow pilots! This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Check out all our 3D printed accessories! Includes 1x RDQ 1Kg TPU 95A Spool 1.75mm
$24.99
RaceDayQuads RDQ 30x30 to 20x20 Stack Adapter - 3D Printed TPU - Choose Your Color
Convert any frame to use a 20x20 stack or even use a 30x30 4n1 ESC and 20x20 FC with this new RDQ TPU Stack adapter! NOTE: On the bottom of the adapter the 20x20 mounting holes are recessed and you must remove the TPU supports for flush mounting. Check out all our 3D printed accessories! Specifications Mount size: 30.5x30.5mm Height: 3mm Weight: 1.28g Includes 1x RDQ 30x30 to 20x20 Stack Adapter - 3D Printed TPU
$2.99
RaceDayQuads RDQ DJI O3 Unit 30x30/20x20 Mount - 3D Printed TPU - Choose Your Color
The perfect mount for the DJI O3 Air unit VTX! Made for RDQ by Chris Booth AKA DobragFPV!Available in tons of colors and will take your build to the next level! This mount doesn't only look cool, It keeps your expensive digital VTX protected and in place, while allowing it to be raised slightly off the carbon creating room for tons of cooling to keep your video crisp all day! Check out all our 3D printed accessories! Features Made for RDQ by Chris Booth AKA DobragFPV! 4x M3 hex nuts needed for 30x30 mounting 4x M2 hex nuts needed for 20x20 mounting Specifications Designed to work with DJI O3 Unit Mount size: 30x30mm 20x20mm Dimensions: H:20mm L:38mm W:38mm Includes 1x RDQ DJI O3 Unit 30x30 / 20x20 Mount Adapter - 3D Printed TPU
$5.99
RaceDayQuads RDQ Logo Sticker Decal V2 - Choose Your Color
Your favorite decal just became even more lovable. This new version comes in more colors than ever before, so you can match your style and still show off where all the magic comes from. Specifications Material: Vinyl Size: 4 x 1.25" Includes 1x RDQ Logo Sticker Decal V2
$0.99
RaceDayQuads RDQ Logo Sticker Decal V2 - Choose Your Color
Your favorite decal just became even more lovable. This new version comes in more colors than ever before, so you can match your style and still show off where all the magic comes from. Specifications Material: Vinyl Size: 4 x 1.25" Includes 1x RDQ Logo Sticker Decal V2
$0.99
RaceDayQuads RDQ Mach 2 / Mach 3 Combo 30x30 Stack Mount - 3D Printed TPU - Choose Your Color
The perfect stackable mount for the RDQ Mach 3 VTX / RDQ Mach 2 VTX / R-XSR or XM+ Combo! Check out all our 3D printed accessories! Specifications Mount size: 30.5x30.5mm Height: 11mm w/ R-XSR Includes 1x RDQ Mach 2 / Mach 3 Combo 30x30 Stack Mount - 3D Printed TPU
$2.99
RaceDayQuads RDQ Quad Wall Mount - 3D Printed PLA - Choose Your Color
This set of wall mounts is a simple way to display your crafts on the wall while getting them off the build area. Designed by Knight-Flyer and Zyro to work with 4'' - 8'' quads while staying simple enough to now draw away the attention from the awesome craft it is holding! 3-D printed in PLA. Check out all our 3D printed accessories! Includes 1x RDQ Quad Wall Mount Set
$7.99
RaceDayQuads RDQ Series 11.1V 3S 2500mAh 5C LiPo Battery for Taranis X9D
All batteries must be shipped by a ground shipping method. This LiPo is not intended for FrSky X9D Plus 2019 or X9D Plus SE 2019. 3S power will damage these radios. We now offer a 2S battery pack designed specifically for X9D 2019 radios! Our newest TX pack is design specifically for the original FrSky Taranis X9D+ and X9D+ SE series transmitters. Includes 3 discharge lead types for compatibility with a wider range of transmitters. More juice equals more stick time! Optionally add a XT60 to JST-XH adapter for charging. We also carry a TX LiPo specifically for the Taranis QX7. Check out all the RDQ Series LiPos, and all our RC Transmitters, parts & accessories! Warning! DO NOT PLUG THE BALANCE CABLE INTO YOUR RADIO!!! SEE BELOW IMAGE Specifications Nominal Voltage: 11.1V Capacity: 2500mAh Discharge Rate: 5C Cells: 3S1P Dimensions: 96x30x26mm Discharge Lead: JST, 80mm Discharge Lead: JST-XH, 80mm Discharge Lead: Servo, 80mm Balance lead: JST-XH, 35mm Weight: 145g Includes 1x RDQ Series 11.1V 3S 2500mAh 5C LiPo Battery for Taranis X9D 1x (OPTIONAL) XT60 to JST-XH Charging Adapter
$22.99
RaceDayQuads Skyzone SKY04X V2 OLED Diversity 5.8GHz FPV Goggles - Choose Your Color
V2 now comes equipped with a 60FPS DVR unit!The SKY04X is First Skyzone goggle with focus adjustment, the 1280x960 high resolution screen have vivid color and high contrast ration, pilot can see more details in the racing. With Steadyview receiver, the receiver merge two signal to one, avoid image tearing and rolling, make image more stable and clear in challenging condition. The new designed optics have focus adjustment feature and 46 degree Field of view, gives pilots more immersive FPV experience. The new OS with 10 languages to set select, pilot have no trouble with the menu system, with shuttle wheel and new user interface, pilot can set all the setting just by rolling the wheel without take off the goggles. Not compatible with Foxeer Wildfire, TBS Fusion, True D V3, and LaForge main Mod V2/3 modules. Check out the rest of our FPV goggles and accessories and all our Skyzone gear! Features SteadyView receiver merges two signal to one, make image more stable and clear in challenging condition. Module bay, goggles have more capability to upgrade. Focus Adjustmentm, The new Optics have large Field of View (46 degree). and the Optics have Focus adjustment feature (-6~+6), no need diopter any more. OELD Screen, The 1280*960 screen have high resolution and vivid color, high contrast ration, pilots can see more details. Advanced Screen Settings, The aspect ration can is switchable, and 4 Preset screen setting and 3 customized setting for indoor, outdoor flight or different weather. Shuttle Wheel Control, No more confusing multi function button or 5 way Joy stick, with smooth and nature shuttle control, easy to navigate. New User Interface with 10 languages, New UI with shuttle wheel, easy to navigate, 10 languages to choose for local user. Built-in DVR Specifications Screen: OLED Resolution: 1280X960 FOV (Diagonal): 46° Aspect Ratio: 4:3/16:9 Focus: -6~+6 adjustable Interpupillary distance(IPD): 58-71mm Receiver: 5.8Ghz 48CH Steadyview Receiver Language: 10 Language Power Supply: DC6.5-25.2V/USB5V Power Consumption: 720mA at 12V DVR: H264,60fps,MOV6Mbps,SD Card support up to128Gb Head Tracker: 3-axis Accelerometer, 3-axisgyroscope Dimensions: 185*75*67mm Weight: 267g Includes 1x Skyzone SKY 04X OLED Diversity 5.8GHz FPV Goggles - Choose Your Color Band/Channel Table Band/CH CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 A 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M B 5733M 5752M 5771M 5790M 5809M 5828M 5847M 5866M E 5705M 5685M 5665M 5645M 5885M 5905M 5925M 5945M F 5740M 5760M 5780M 5800M 5820M 5840M 5860M 5880M R 5658M 5695M 5732M 5769M 5806M 5843M 5880M 5917M L 5362M 5399M 5436M 5473M 5510M 5547M 5584M 5621M Sensitivity -98dBm±1dBm Antenna Port 2 X SMA-K,50ohm
$529.99$499.99
RaceDayQuads SMA Grip (1PC) - 3D Printed TPU - Choose Your Color
Never worry about struggling to tighten that SMA connection again with the SMA Grip! Others have a plastic SMA nuts that easily break upon impact but these are a bit more robust with colors to choose from. Check out the rest of our 3D Printed Gear! Includes 1x SMA Grip (1PC) - 3D Printed TPU
$0.99
RaceDayQuads Standoff T Antenna Holder Mount 2 Pack for Crossfire and R9 - 3D Printed TPU - Choose Your Color
T antenna tube holders compatible with both the normal and knurled M3 standoffs (not barbell/dogbone). Works perfect with the TBS Immortal T and R9 antennas. Check out the rest of our 3D printed products. Cant find the 3D parts you're looking for? Check out our custom 3D printing service! Includes 2x RDQ Standoff T Antenna Holder Mount for Crossfire and R9
$3.49
You have seen 48 out of 69 products