RaceDayQuads
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 90 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes. Check out all our 3D printed accessories! Includes 1x 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU
$1.99
RaceDayQuads Antenna Holder/Mount for Standoff - 3D Printed TPU - Choose Your Color
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x Antenna Holder/Mount for Standoff - 3D Printed TPU
$1.99
RaceDayQuads BetaFPV Meteor65 Pro Whoop Frame - Choose Your Color
Choose Between green and black for your whoop frame! Spare replacement part for the BetaFPV Meteor65 Pro Whoop. Check out all our Meteor65 parts & accessories, the rest of our whoop frames & accessories and all our BetaFPV gear! Features The space for the FC board is limited in order to support 35mm propellers on a 65mm drone. This Meteor65 Pro frame can only support cross shaped FC boards. The normal whoop FC board DO NOT fit this frame. Meteor65 Pro frame’s motor mounting position uses a triangle bilateral stretch structure, making the frame more aesthetic. It also provides you with a more durable and smoother flight experience The frame is suitable for 31-35mm propeller like Gemfan 35mm-3 propellers. Pay attention, HQ 35mm props are a little bit bigger and DO NOT fit this frame. Specifications Material: PP Wheelbase: 65mm Prop Size: 31-35mm FC Mounting: 26x26mm Cross Shaped AIOs Motor Mounting: 6.6mm Weight: 3.2g Includes 1x BetaFPV Meteor65 Pro Whoop Frame
$4.99
RaceDayQuads CLRacing Race LED/PCB Wire 4 Pack - Choose Your Color and Size
NOTE: PICTURES ARE FROM THE OLDER VERSION. UPDATED PICTURES INCOMING Similar to the RaceWire, this product from CLRacing offers protection of your motor's wires while simultaneously making your quad look fantastic with 6 bright LEDs. Available in White, Red, Green, Purple, Yellow and Blue, the CLRacing LED Race Wire has colors to suit any quad! Note, the listing is for 4pcs. CLRacing Race LEDs Specs: Weight: 1.1g LED Quantity: 6 Size: 9x35x1.6mm Lipo Input: 3-6S Color: Red, White, Blue, Green Unit Quantity: 4pc
$4.99
RaceDayQuads Gemfan Flash 5149 Tri-Blade 5" Prop 4 Pack - Choose Your Color
Gemfan has been a trusted name in multi-rotor propellers since the beginning and are still pushing the envelope of speed and control to this day! Check out all our 5" Props and all our Gemfan products! Features Lighter, faster, and stronger Compatible with POPO system When compared to the Gemfan 5152 Tri-Blade Propeller, the response at lower speeds was optimized Specifications Prop weight: 4.5 grams per prop Length x Pitch: 5.1 x 4.9 inch Outer diameter: 15.3mm Center aperture: 5mm Center thickness: 7mm Included 4x Gemfan Flash 5149 Tri-Blade 5" Prop (2CW, 2CCW)
$3.29
RaceDayQuads Gemfan Hurricane 4023 Durable Tri-Blade 4" Prop 4 Pack (5mm & 1.5mm Mounting) - Choose Your Color
A great new option for your T mount or 5mm shafted ultralight/toothpick builds!A special insert allows you to use these props on either type of shaft. Check out the rest of our 4" props and all our Gemfan products! Specifications Diameter: 4" Pitch: 2.3" Blades: 3 Material: Polycarbonate Blade Diameter: 102.2mm Hub Thickness: 5.5mm Shaft Hole: 5mm and 1.5mm T-mount with the optional included insert Weight: 1.98g\2.1g(with adapter) Includes 4x Gemfan Hurricane 4023 Durable Tri-Blade 4" Prop (2 CW, 2 CCW)
$2.99
RaceDayQuads Gemfan Sbang 4934 Tri-Blade 5" Prop 4 Pack - Choose Version
SBANG lovers rejoice! This is the prop you've all been waiting for. Incredible response and ultra lightweight! Note: The Gemfan Sbang 4934 Tri-Blade 5" props come in packs facing a single direction. Be sure to pick up both CW and CCW sets! Check out all our 5" Props and all our Gemfan products! Specifications Diameter: 4.9in Pitch: 3.4 Blades: 3 Material: Polycarbonate Shaft Hole: 5mm Weight: 3.5g Recommended Quad Weight: 500-700g Includes 4x Gemfan Sbang 4934 Tri-Blade 5" Prop (CW or CCW)
$2.99
RaceDayQuads GoPro Session Armor - 3D Printed TPU - Choose Your Color
Keep your session safe and sound with this 3d printed armor. We also offer a ND filter for those who really want to pimp out that HD footage! Check out all our 3D printed accessories! Includes 1x GoPro Session Armor - 3D Printed TPU - Choose Your Color
$9.99
RaceDayQuads HappyModel Larva X FC / VTX Insulator Spacer - 3D Printed TPU - Choose Your Color
This little 3D printed insulator is designed to go between the FC and VTX on the Happymodel Larva to allow more airflow and ease stack assembly. Check out the rest of our Larva Parts, 3D printed accessories and HappyModel gear! Includes 1x Happymodel Larva FC / VTX Insulator
$0.99
RaceDayQuads HQ Prop 2.5x2.5x3 Tri-Blade 2.5" Prop 4 Pack - Choose Your Color
More HQ goodness for the Micro Class pilots! Check out all our 2.5" props as well as our HQProp selection! Specifications Propeller Diameter: 2.5 inch Pitch : 2.5 Blades : 3 Material : Poly Carbonate Weight : 1.29 Hub Diameter : 9.8mm Hub Thickness:5mm Shaft :1.9/1.5/1.9mm Adaptor Rings : NO Includes 4x HQ Prop 2.5x2.5x3 Tri-Blade 2.5" Prop (2CW, 2CCW)
$1.59
RaceDayQuads HQ Prop 2.5x3.5x3 Tri-Blade 2.5" Prop 4 Pack - Choose Your Color
More HQ goodness for the Micro Class pilots! Check out all our 2.5" props as well as our HQProp selection! Specifications Propeller Diameter: 2.5 inch Pitch : 3.5 Blades : 3 Material : Poly Carbonate Weight : 1.29 Hub Diameter : 9.8mm Hub Thickness:5mm Shaft :1.9/1.5/1.9mm Adaptor Rings : NO Includes 4x HQ Prop 2.5x3.5x3 Tri-Blade 2.5" Prop
$1.59
RaceDayQuads HQ Prop 3x3x3 PC Durable Tri-Blade 3" Prop 4 Pack (5mm Shaft) - Choose Your Color
Great prop in a great pitch! Get your HQ Prop 3x3x3 PC Durable Tri-Blade 3" Prop 4 Pack (5mm Shaft) today. Be sure to check out all our 3" props and all our HQProp products! Specifications Length: 3 inch Pitch:.3* Blades: 3 Hub Diameter:13mm Hub Thicknes:5.5mm Shaft: 5mm Weight: 1.57g Color: Black Adaptor Rings: NO Includes 4x HQ Prop 3x3x3 PC Durable Tri-Blade 3" Prop (2CW, 2CCW)
$2.99
RaceDayQuads HQ Prop 5.5X3.5X3 Durable Tri-blade 5.5" Prop 4 Pack - Green
HQProp latest long-range focused propeller features POPO compatibility as well as a low pitch airfoil, giving this prop mellow characteristics in flight, while also not killing your batteries. It's worth noting the unique length of the prop. Having a length of 5.5 inches allows this prop to fit on all 6 inch quads. The slightly shorter prop will give plenty of clearance while also giving you tons of clean air. On the other hand, there are some 5 inch airframes out there that would also support a 5.5 inch prop. With that in mind, this can be a very versatile propeller worthy of putting on your rig, whether you are long-range cruising, or getting that silky smooth freestyle footage. Check out all our 5" Props and all our HQProp products! Specifications Size: 5.5" Pitch: 3.5" Material: PC Blades: 3 Weight: 5.4g Mounting hole: 5mm Center Hub Thickness: 7mm POPO Compatible: Yes Includes 4x HQ Prop 5.5X3.5X3 Durable Tri-blade 5.5" Prop (2CW, 2CCW)
$3.59
RaceDayQuads HQ Prop 5x4.3x3 V1S Tri-Blade 5" Prop 4 Pack - Choose Your Color
Efficiency, feel, and POP! That's what pilots love about the V1S 5" prop from HQ. With a highly tuned design, the 5x4.3x3 is made to make all of your 5" FPV dreams come true. The package includes 4 props (2cw and 2ccw), and we carry all available colors. Check out all our 5" Props and all our HQProp products! Specifications Length: 5 inch Pitch: 4.3 Blades: 3 Material: Poly Carbonate Hub Diameter:13.2mm Hub Thickness:7.1mm Shaft: 5mm Weight: 3.75g Includes 4x HQ Prop 5x4.3x3 V1S Tri-Blade 5" Prop (2CW, 2CWW)
$3.69
RaceDayQuads HQ Prop 5x4.5x3 V1S Tri-Blade 5" Prop 4 Pack - Choose Your Color
Efficiency, feel, and POP! That's what pilots love about the V1S 5" from HQ Prop. With a highly tuned design, the 5x4.5x3 is made to make all of your 5" FPV dreams come true. Check out all our 5" Props and all our HQProp products! Specifications Propeller Diameter: 5 inch Pitch: 4.5 Blades: 3 Material: Poly Carbonate Weight: 4.19g Hub Diameter : 12.8mm Hub Thickness:6.8mm Shaft:5mm Adaptor Rings: No Includes 4x HQ Prop 5x4.5x3 V1S Tri-Blade 5" Prop (2CW, 2CCW)
$2.99
RaceDayQuads HQ Prop Juicy Prop J37 4.9" Prop 4 Pack - Choose Your Color
The new HQ Juicy J37 props are a perfect namesake. The flow you can achieve can only be described as one of the juiciest experiences you can have. Check out the rest of our 5" props, and all our HQ Prop selections! Specifications Diameter: 4.9in Φ Pitch: 3.7in Blades: 3 Material: Polycarbonate Hub Thickness: 6mm Shaft Hole: 5mm Weight: 3.4g Includes 4x HQ Prop Juicy Prop J37 4.9" Prop
$3.49
RaceDayQuads HQ Prop T3x3 Bi-Blade 3" Prop 4 Pack - Choose Your Color
Fresh from HQ is the T3x3 poly-carbonate propeller. Designed for both freestyle and racing! Check out all our 3" Props, and all our HQProp products! Specifications Length: 3 inch Pitch: 3 inch Material: PolyCarbonate Weight: 1.25g Hub size: 1.5mm (inner) Hub thickness: 5mm Includes 4x HQ Prop T3x3 Bi-Blade 3" Prop
$1.89
RaceDayQuads Lumenier AXII HD 2 5.8GHz RP-SMA Antenna Combo Set for DJI Goggles - Choose Color
Building on the success of the original AXII HD antennas, the new AXII HD 2 improves on both looks and performance. Finally, a high-quality set of antennas designed as a direct replacement and upgrade for your stock DJI antennas for the DJI Digital HD FPV Goggles. The AXII HD 2 antennas were designed from the ground up to be a perfect match for the DJI goggles. The AXII HD 2 antennas feature a custom molded semi-transparent visor with embeded antennas inside. This provides a low profile, sleek looking, direct connect RP-SMA antenna solution, and all this with improved performance. The Lumenier AXII HD 2 5.8GHz Patch Antenna offers you the highest performance you can get from a high gain mini patch antenna designed for DJI Digital HD FPV. The Lumenier AXII HD Patch has a high 8.4 dBiC gain for long range flying and excellent penetration through objects compared to standard omnidirectional FPV antennas. It also features an incredible 92% efficiency (most mini patch antennas are below 75%), which means you get amazing performance and the best picture in your video goggles. Lumenier, designed in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the Lumenier AXII HD 5.8GHz Patch Antenna. Form Fitting Design for DJI HD FPV Goggles Not only do the AXII HD 2 Antennas have awesome performance, but they do it in an ultra-compact form factor with a custom injection-molded polycarbonate visor. This makes the antenna an ideal choice for your DJI HD system. Each Patch antenna comes pre-installed inside the visor making install a breeze. Since it is so small and compact you don't have to worry about bumping into things while wearing these antennas like other larger and heavier high gain antennas. Super easy to store in your travel bag as well, and no need to remove the antennas while traveling. High Gain & Wide Beam Width Generally, with such a high gain antenna you would have to sacrifice the effective FOV (field of view) or beam width, but with the AXII HD 2 Patch Antenna you get the best of both worlds: High gain and wide beam width! The AXII HD Patch will give you 8.4dBiC gain while still covering over 76 degrees of horizontal beam and 68 degrees vertically. This means the antenna is more forgiving and can still give you a clear picture even if you aren't pointed exactly at your aircraft or transmitter. Check out our DJI antenna selection, all our DJI compatible gear and all our Lumenier products! Features Compact low-profile design on your goggles, easy to store and transport High gain directional antennas LHCP Circular Polarization Every antenna is QC checked for guaranteed best performance Specifications AXII HD 2 Patch Polarization: LHCP Frequency: 5.8GHz Bandwidth: 220 Mhz Gain: 8.4 dBiC VSWR: 1:1.1 Radiation Efficiency: 95% Beam Width: 76° H. 76° V. Connector: RP-SMA Weight: 33g AXII HD 2 Stubby Gain: 1.9dbic Axial ratio: 1.0 (near perfect) Bandwidth: 5.3GHz-6.2GHz Radiation Efficiency: 99% Cross-Polar Rejection: -15 to -30dB (1.9%) Beam Width: 360 degrees SWR: <=1.5:1 Connector: RP-SMA Weight: 3.5g Includes 1x Lumenier AXII HD 2 5.8GHz RP-SMA Patch Antenna 2x Lumenier AXII HD 2 5.8GHz RP-SMA Omni Antenna
$79.99
RaceDayQuads Lumenier AXII HD 2 5.8GHz RP-SMA Patch Antenna for DJI Goggles - Choose Color
Building on the success of the original AXII HD antennas, the new AXII HD 2 improves on both looks and performance. Finally, a high-quality set of antennas designed as a direct replacement and upgrade for your stock DJI antennas for the DJI Digital HD FPV Goggles. The AXII HD 2 antennas were designed from the ground up to be a perfect match for the DJI goggles. The AXII HD 2 antennas feature a custom molded semi-transparent visor with embeded antennas inside. This provides a low profile, sleek looking, direct connect RP-SMA antenna solution, and all this with improved performance. The Lumenier AXII HD 2 5.8GHz Patch Antenna offers you the highest performance you can get from a high gain mini patch antenna designed for DJI Digital HD FPV. The Lumenier AXII HD Patch has a high 8.4 dBiC gain for long range flying and excellent penetration through objects compared to standard omnidirectional FPV antennas. It also features an incredible 92% efficiency (most mini patch antennas are below 75%), which means you get amazing performance and the best picture in your video goggles. Lumenier, designed in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the Lumenier AXII HD 5.8GHz Patch Antenna. Form Fitting Design for DJI HD FPV Goggles Not only do the AXII HD 2 Antennas have awesome performance, but they do it in an ultra-compact form factor with a custom injection-molded polycarbonate visor. This makes the antenna an ideal choice for your DJI HD system. Each Patch antenna comes pre-installed inside the visor making install a breeze. Since it is so small and compact you don't have to worry about bumping into things while wearing these antennas like other larger and heavier high gain antennas. Super easy to store in your travel bag as well, and no need to remove the antennas while traveling. High Gain & Wide Beam Width Generally, with such a high gain antenna you would have to sacrifice the effective FOV (field of view) or beam width, but with the AXII HD 2 Patch Antenna you get the best of both worlds: High gain and wide beam width! The AXII HD Patch will give you 8.4dBiC gain while still covering over 76 degrees of horizontal beam and 68 degrees vertically. This means the antenna is more forgiving and can still give you a clear picture even if you aren't pointed exactly at your aircraft or transmitter. Check out our DJI antenna selection, all our DJI compatible gear and all our Lumenier products! Features Compact low-profile design on your goggles, easy to store and transport High gain directional antennas LHCP Circular Polarization Every antenna is QC checked for guaranteed best performance Specifications Polarization: LHCP Frequency: 5.8GHz Bandwidth: 220 Mhz Gain: 8.4 dBiC VSWR: 1:1.1 Radiation Efficiency: 95% Beam Width: 76° H. 76° V. Connector: RP-SMA Weight: 33g Includes 1x Lumenier AXII HD 2 5.8GHz RP-SMA Patch Antenna for DJI Goggles
$49.99
RaceDayQuads M2 Countersunk Washer (1PC) - Choose Your Color
Individual anodized aluminum M2 countersunk washers in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! These are sloped inside, not stepped. If you're using our button/pan head M2 Hardware, you'll want to use the stepped washers. Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M2 Countersunk Washer
$0.35
RaceDayQuads M2 Nylock Nut (1PC) - Choose Your Color
Individual anodized aluminum M2 nylon lock nuts in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M2 Nylock Nut
$0.50
RaceDayQuads M2 Stepped Washer (1PC) - Choose Your Color
Individual anodized aluminum M2 stepped washers for button / pan head screws in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M2 Stepped Washer
$0.35
RaceDayQuads M3 7075 Aluminum Socket Head Hex Screw (1pc) - Choose Your Color & Size
For the serious builders who want to style up their quad with colored accents, this is where these come in. Pick between Green, Blue, Orange, Red, Pink, Purple, or Gold for your preference. For these M3 color hex screws, choose between 10mm, or 12mm of the height of your hardware. Check out all our hardware and the rest of our M3 Hardware! Features 7075 Grade aluminum (Motor and Top plate) Includes 1x M3 7075 Aluminum Socket Head Hex Screw (1pc) - Choose Your Color & Size
$0.55
RaceDayQuads M3 Aluminum Cone Washer (1pc) - Choose Color
Individual anodized aluminum M3 cone washers in a variety of colors, are sure to suit your next build. Sold individually, so be sure to select the quantity you want! Similar to your Apex cone washer just slightly bigger at the base. Customize the look of your quad while adding some protection for bolts! Be sure to pick up the rest of the hardware for your next build and any tools or building supplies you may need! Specifications Weight: 0.6g Diameter: 12.07mm Height: 3.98mm Includes 1x M3 Aluminum Cone Washer
$0.85
RaceDayQuads M3 Barbell Standoff (1pc) - Choose Your Version
A barbell style standoff with smooth edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of our M3 Hardware! Includes 1x M3 Barbell Standoff
$1.05
RaceDayQuads M3 Countersunk Washer (1pc) - Choose Your Color
Individual anodized aluminum M3 countersunk washers in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! These are sloped inside, not stepped. If you're using our button/pan head M3 Hardware, you'll want to use the stepped washers. Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M3 Countersunk Washer
$0.25
RaceDayQuads M3 Knurled Barbell Standoff (1pc) - Choose Your Version
A barbell style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of our M3 Hardware! Includes 1x M3 Knurled Barbell Standoff
$1.05
RaceDayQuads M3 Knurled Stack Standoff (1pc) - Choose Your Version
Individual anodized aluminum M3 knurled stack standoff in a variety of colors sure to suit your next build. These come in two sizes. One has a 6mm female standoff section and a 6mm male thread, the other has a 4.5mm female standoff section and a 6.5mm male thread. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M3 Knurled Stack Standoff
$0.45
RaceDayQuads M3 Knurled Standoff (1pc) - Choose Your Version
A straight style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of our M3 Hardware! Includes 1x M3 Knurled Standoff
$1.05
RaceDayQuads M3 Knurled Standoff w/ Small Step (1PC) - Choose Your Color & Size
Individual anodized aluminum M3 knurled female standoff with small step in a variety of colors sure to suit your next build. Currently available in 2 and 5mm heights. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M3 Knurled Standoff w/ Small Step
$0.45
RaceDayQuads M3 Knurled Thumb Nut Standoff (1pc) - Choose Your Color
Individual anodized aluminum M3 knurled thumb nut standoff in a variety of colors sure to suit your next build. These are 7mm tall and 10mm in diameter. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need!
$1.05
RaceDayQuads M3 Normal Standoff (1pc) - Choose Your Version
A normal style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of our M3 Hardware! Includes 1x M3 Normal Standoff
$1.05
RaceDayQuads M3 Nylock Nut (1pc) - Choose Your Color
Individual anodized aluminum M3 nylon lock nuts in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M3 Nylock Nut
$0.50
RaceDayQuads M3 Nylock Nut (1pc) - Choose Your Color
Individual anodized aluminum M3 nylon lock nuts in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M3 Nylock Nut
$0.50
RaceDayQuads M3 Stepped Washer (1pc) - Choose Your Color
Individual anodized aluminum M3 stepped washers for button / pan head screws in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M3 Stepped Washer
$0.25
RaceDayQuads M5 Low Profile Prop Nut w/ Flange (1PC) - Choose Your Color
These low profile prop nuts are perfect for virtually any motor with an M5 shaft, the nylock makes sure they're secure during flight.Check out our other prop tools, nuts, and accessories, as well as the tools and building supplies section! Includes 1x M5 Low Profile Motor Nut w/ Flange
$0.80
RaceDayQuads M5 Prop Nut w/ Flange (1PC) - Choose Your Color
Individual anodized aluminum M5 nylock nut with flange in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! We also carry a low profile version of this nut. Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M5 Motor Nut w/ Flange
$0.80
RaceDayQuads Motor Soft Mount 4 Pack - 3D Printed TPU - Choose Your Color
Dampen motor vibrations with these 3D printed TPU FPV motor soft mounts. Placing these between your motor and frame will reduce the vibrations which make it to your flight controller. That, in turn, will increase flight performance. Able to fit all sold stator sizes and fit all of our 16x16mm and 19x19mm bolt pattern motors. Check out all our 3D printed accessories! Includes 1x Motor Soft Mount 4 Pack - 3D Printed TPU - Choose Your Color
$2.99
RaceDayQuads Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit - Choose Your Color
Experience a sleek ride with the Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit. Its Squish X geometry provides a smaller size and keeps the propellers out of your camera's view. This was designed to be a hard-core-looking frame with jagged arm ends, a gnarly-looking quad for extreme freestyle pilots! Choose between green and purple for your TPU color. Be sure to check out all our 5" frames, and all our Quadifier products! Features Designed for 20x20 and 30x30 stacks Has 20x20 mounting in the back for any HD VTX of your liking. Squish X for smaller size and better GoPro shots GoPro mounts available 5mm arms Fits micro 19x19 size cameras Integrated XT60 connector for the top plate (included) Weight - 130g, 150g with arm guards Specifications Stack Mounting: 30x30, 20x20 FPV Camera Mount: 19mm Micro cam Motor Mount Pattern: 16x16 or 19x19mm Mid Plate Thickness: 2.65mm Bottom Plate Thickness: 2.7mm Top Plate Thickness: 2.65mm Frame Shape: Squish X geometry Arm Thickness: 5mm Frame Weight With TPU: 150g Includes 1x Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit - Choose Your Color 1x Hardware set 1x TPU Micro camera mount 1x TPU AXII/lollipop antenna mount
$74.99$69.99
RaceDayQuads RadioMaster Sticky360 Stick Ends for AG01 Gimbals - Choose Version
The RadioMaster Sticky360 Stick Ends for AG01 Gimbals two piece anodized aluminum rc transmitter stick ends are M4 threaded for the AG01 gimbals but also work with any M4 threaded gimbals. The two piece design allows you to adjust the height of the stick ends to suit your grip style. Aggressive knurling keeps you in control at all times. It doesn't matter if you're a thumber, pincher or somewhere in between, the Sticky 360 series brings you a comfortable, zero-slip experience. Make sure to check out the rest of our transmitter accessories and the rest of our RadioMaster gear! Specifications Threading: M4 Dimensions: 9.2x24mm Weight: 1.9g Includes 2x RadioMaster Sticky360 Gimbal Stick Ends
$14.99
RaceDayQuads RDQ 1Kg Spool TPU 95A 1.75mm Filament - Choose Color
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. For all of your FPV 3D printing needs, we bring you RDQ TPU! With RDQ TPU you can expect the highest quality, rivaling top brands like Sainsmart. All 3D parts on our website that we print ourselves are printed with RDQ TPU, because reliability and durability are of the utmost importance to us and our fellow pilots! This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Check out all our 3D printed accessories! Includes 1x RDQ 1Kg TPU 95A Spool 1.75mm
$24.99
RaceDayQuads RDQ 30x30 to 20x20 Stack Adapter - 3D Printed TPU - Choose Your Color
Convert any frame to use a 20x20 stack or even use a 30x30 4n1 ESC and 20x20 FC with this new RDQ TPU Stack adapter! NOTE: On the bottom of the adapter the 20x20 mounting holes are recessed and you must remove the TPU supports for flush mounting. Check out all our 3D printed accessories! Specifications Mount size: 30.5x30.5mm Height: 3mm Weight: 1.28g Includes 1x RDQ 30x30 to 20x20 Stack Adapter - 3D Printed TPU
$2.99
RaceDayQuads RDQ DJI O3 Unit 30x30/20x20 Mount - 3D Printed TPU - Choose Your Color
The perfect mount for the DJI O3 Air unit VTX! Made for RDQ by Chris Booth AKA DobragFPV!Available in tons of colors and will take your build to the next level! This mount doesn't only look cool, It keeps your expensive digital VTX protected and in place, while allowing it to be raised slightly off the carbon creating room for tons of cooling to keep your video crisp all day! Check out all our 3D printed accessories! Features Made for RDQ by Chris Booth AKA DobragFPV! 4x M3 hex nuts needed for 30x30 mounting 4x M2 hex nuts needed for 20x20 mounting Specifications Designed to work with DJI O3 Unit Mount size: 30x30mm 20x20mm Dimensions: H:20mm L:38mm W:38mm Includes 1x RDQ DJI O3 Unit 30x30 / 20x20 Mount Adapter - 3D Printed TPU
$5.99
RaceDayQuads RDQ Logo Sticker Decal V2 - Choose Your Color
Your favorite decal just became even more lovable. This new version comes in more colors than ever before, so you can match your style and still show off where all the magic comes from. Specifications Material: Vinyl Size: 4 x 1.25" Includes 1x RDQ Logo Sticker Decal V2
$0.99
RaceDayQuads RDQ Logo Sticker Decal V2 - Choose Your Color
Your favorite decal just became even more lovable. This new version comes in more colors than ever before, so you can match your style and still show off where all the magic comes from. Specifications Material: Vinyl Size: 4 x 1.25" Includes 1x RDQ Logo Sticker Decal V2
$0.99
RaceDayQuads RDQ Mach 2 / Mach 3 Combo 30x30 Stack Mount - 3D Printed TPU - Choose Your Color
The perfect stackable mount for the RDQ Mach 3 VTX / RDQ Mach 2 VTX / R-XSR or XM+ Combo! Check out all our 3D printed accessories! Specifications Mount size: 30.5x30.5mm Height: 11mm w/ R-XSR Includes 1x RDQ Mach 2 / Mach 3 Combo 30x30 Stack Mount - 3D Printed TPU
$2.99
You have seen 48 out of 71 products