in AKK's newest VTX which has built-in DVR, Smart Audio, up to 6s (7 - 26v) direct Lipo input, adjustable power output (25, 200, 600 & 1000 mW) w/ pit mode, and a 5v cam power output.  Check out the rest of our selection of VTX's!  Specifications Brand name: AKK Item name: Infinite DVR VTX Input voltage: 7V to 26V Extra features: Smart audio DVR Power supply: 5V output for camera Output power: 25/200/600mW/1000mW Antenna connector: MMCX Cable connector: Solder pads Records Video Size: VGA (640*480) Max Support TF Card: 32G Dimension: 36x36mm, 30.5 stackable hole Weight: 8.8g (excluding antenna) Features Support Smart audio  25/200/600/1000mW power switchable One button frequency and power setupOSD configuration using smart audio 7-26V input with 5V output for camera With MIC   Notice: 5645/5925/5945 (E4/E7/E8) are not available due to FCC regulation. Selecting 5645/5925/5945 (E4/E7/E8) will be invalid action.              Note: 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.  This equipment is being sold under FCC’s amateur radio rules. Operators must require amateur radio license to operator legally in  the US. Use of amateur equipment without a license or use of  equipment on restricted frequencies could subject the operator to  significant fines by the FCC.By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate  the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.Pacakge Included: 1x VTX 1x pigtail 1x cable    FPV REGULATORY NOTICE The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Read more less

M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying. Check out all our Micro/Nano VTXs and all our BetaFPV gear! Features With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission. Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable for the BETAFPV C02 camera. Comes with IPX type of antenna, just plug and play, no extra solder work needed.  M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G). Diagram Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, and NewBeeDrone BeeEye. How to connect with the Flight Controller Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board. Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board. Change Band & Band & Chnanel & Power M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency point and power. Switchable power includes 25mW, 100mW, 200mW and 350mW. Except for the method via OSD menu as show above, the output power could be changed via the power button. Specifications Item: M03 5.8G VTX Output power: 25/100/200/350mW (adjustable) Supply voltage range: 4.5-5.5V Weight: 1.1g (antenna not included) VTX internal size: 18X14mm Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio Modulation type: FM Frequency control: PLL All harmonic: Max -50dBm Frequency stability: ±100KHz (Typ.) Frequency precision: ±200KHz (Typ.) Channel carrier error: ±1.5dB Antenna port: 50 Ω Operating temperature: -10℃~+80℃ Camera connector: JST-0.8, compatible with cameras like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye. Includes 1x BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL 5x 30AWG silicone wire (30mm)

Read more less

This Foxeer HDZero HD 720P digital transmitter is perfect for FPV racing, with 200mw output power and 720p HD video streaming. Race with the top of the line for an immersive, crystal clear experience. Check out all our VTXs and our entire Foxeer Collection! Specifications Frequency 5.8G Resolution 1280x720@60fps RF power 25mw/200mw RF Connector Secured UFL Interface 4 lane MIPI CSI YUV422 Video Connector 20 Position 0.30mm Pitch Size 32mm x 34mm x 6mm Weight 6.3g Power 410mA@12V Input Voltage 8~26V(3~6S) Mounting 20mm x 20mm Φ4 M3 Includes 1x Foxeer HDZero 720P 20x20 25-200mw Digital HD VTX - Race Edition

Read more less

The Happymodel OVX300 VTX is based on the Open source project OpenVTX powered by JyeSmith from the EpxressLRS team. Open VTX aims to provide firmware with both the SmartAudio and Tramp protocols. Either protocol can be used on the flight controller and on VTx power up the protocol used is automatically detected by OpenVTx. Check out our other U.Fl VTXs, as well as the rest of our Happymodel selection! Specifications Input Voltage: 5V RF Output Power: 25-300mW Antenna Connector: U.Fl Power/Video Connection: Solder Pads Stack Size: Not Stack Mounted Dimensions: 15x14mm Weight: 0.9g Includes 1x Happymodel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX

Read more less

The HD Zero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.  Pairs perfectly with the HDZero Nano Camera! Check out the rest of our HDZero gear! Features 720p 60FPS Switchable 25mW & 200mW Output Lightweight Specifications Input Voltage: 7-26V Output Power: 25mW, 200mW Operating Frequency: 5.8GHz Antenna Interface: U.FL (IPEX 1) MSP Canvas Mode: Yes Operating Temperature: 32-104°F Mounting Pattern: 20x20mm, M3 Dimensions: 34x34x6mm Weight: 5.9g Includes 1x HDZero Race V2 25-200mW Digital HD VTX - U.FL

Read more less

The HDZero Race V3 1080P VTX is your ideal choice for durability and reliability. Additionally, the Race V3 features larger components for increased stability consideration and an extra glue coating for superior crash protection. Get the ultimate VTX for race-ready performance. This board is rated with a 1.6mm thick PCB and reverse polarity protection circuit, you'll experience safer time working on this board. No soldering is needed – just plug the wire harness into a compatible HD-ready FC.  The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz. Check out all our VTXs and our HDZero selection Features Easy installation without soldering, just plug the wire harness into a compatible HD-ready FC High-quality video in multiple resolutions: 540p90, 720p60, and 1080p30 Improved durability and reduced weight with a width similar to many FCs Additional glue coating for crash protection of smaller components Secure attachment of antenna with a metal bar and screws Switchable power options: 25mW and 200mW Small and lightweight: 28x32x5mm, 5.5 grams Large package size components for stability Durable design with a 1.6mm thick PCB Operates on a 5.8GHz frequency band 3rd generation digital video transmitter Wide voltage range: 4V to 12V Designed for FPV racing Specifications Resolution Default: 540p90/720p60/1080p30 Frequency: 5.725-5.850GHz RF power: 25mw/200mw RF Connector: Secured U.FL Interface: 4 lane MIPI CSI YUV422 Video Connector: 20 Position 0.30mm Pitch Size: 32mmx28mmx5mm Weight: 5.5g Harness length: 40mm power input: 4V-12V Mounting: 20mm x 20mm M4 with rubber grommets Firmware Firmware Includes 1x HDZero Race V3 720P 20x20 25-200mw Digital HD VTX 

Read more less

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g. Check out all our Shark Byte gear, and our HDZero selection! Features Ultra-high sensitive CMOS sensor Excellent low light performance HDZero Nano Lite Camera HDZero Whoop Lite VTX Removal Shielding Box Supports Smart Audio Under 7g in Weight Antenna Retention 4mm Thickness 1S-3S Input Specifications HDZERO WHOOP LITE VTX Input Voltage: 1S-3S Output Power: 23mW, 200mW Operating Frequency: 5.727-5.850GHz Resolution: 1280x720@60fps Power Consumption: 5W @ 25mW, 5.8W @ 200mW MSP Canvas Mode: Yes Antenna Interface: U.FL (IPEX 1) Operating Temperature: 32-104°F Mounting Pattern: 25x25mm, M2 Weight: 7g total package HDZERO NANO LITE CAMERA Size: 14x16x11mm Weight: 1.5gram Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65° Includes 1x HDZero Whoop Lite VTX  1x HDZero Nano Lite Camera  1x Dipole Antenna 1x 40mm Mipi Cable  1x Power/Uart Cable 2x Zip ties 4x Rubber Grommet 

Read more less

The new iFlight Blitz 30x30 25-1000mW+ 5.8GHz VTX - MMCX is capable of blasting over 1000mW from a super durable machined aluminum case!  Check out all our VTXs as well as our entire iFlight selection! Features Stable output power 4 Power levels up to 1600mW* 40 Channels (including Raceband) Fast frequency lock, no startup interference with other pilots Built-in output power self-check functionality VTX telemetry with IRC Tramp protocol Specifications Input voltage: 7V～36V Interface: MMCX Power levels: PIT/25mW/400mW/800mW/1600mW Channels: 40 (including Raceband) Mounting pattern: 30.5x30.5mm/Φ3 VTX telemetry: IRC Tramp IRC Tramp VTX table values: 25mW/400mW/800mW/1600mW Weight: 18.9g  *VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use iFlight's prepared Betaflight VTX tables according to your region. Betaflight IRC Tramp Configuration: Please download VTX tables here Includes 1x iFlight Blitz 30x30 25-1000mW+ 5.8GHz VTX - MMCX Wiring Diagram

Read more less

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp, we set out to raise the bar on video transmitter technology. With Ghost, we set out to redefine the norms in receivers for R/C control. And now we have fused these two together, in the groundbreaking Ghost Hybrid. Designed by pilots, built by pilots, supported by pilots. Check out the entire Ghost RC System, as well as the rest of our ImmersionRC selection! Features Two full receiver channels (not just dual antenna) Only 2.2g, perfect for the popular sub-250g class Extreme Range AND Low Latency 500Hz R/C Link Updates (HW is 1kHz ready) 2.4GHz Lora OR FLRC control modes, for the best performance in any environment Integrated 5.8GHz 25mW - 600mW Video Transmitter Thermally Regulated, Factory Calibrated Specifications Input Voltage: 5V VTX Output Power: 25-600mW Antenna Connector: U.FL Power/Video Connection: Solder Pads / Plug Frequency Range : 2406 - 2479MHz Modulation: Chirp Spread Spectrum + Adaptive FHSS Binding: Bidirectional with confirmation and protocol negotiation RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come Downlink Tx Power: +13dBm Sensitivity: -117dBm in Long Range mode Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted Firmware: Over-the-air (OTA) upgradable Stack Size: 20x20mm, 25x25mm Dimensions: 31.5x30mm Weight: 2.2g Includes 1x ImmersionRC Ghost Hybrid DUO V2 2.4GHz Receiver & 20-600mW 5.8GHz VTX

Read more less

The Most Popular Product in RDQ's History... JUST. GOT. BETTER. The Mach 3 pushes it up a notch and represents the latest and greatest the hobby has to offer in terms of Video Transmitters. Packed with features, the Mach 3 improves upon the Mach 2 by increasing max input power to 6S direct battery voltage and increasing the max output to 1 Watt. The Mach 3 is the same size as its predecessor and maintains the same expansive feature set that made it so insanely popular. Let's dive into the features of this innovative and affordable VTX below:  Features 0/25/200/600/1000mw power options - race with your buddies or go LONG range! 2S-6S direct input (powering off of VBAT/direct from your battery leads is recommended) Audio Control - Control the channel and power setting of the VTX using your radio and OSD (on-screen display) MMCX Connector for extreme durability, or UFL to work with antennas you have On board microphone 100% USA Legal Channels - Keep the Feds off your back! Note, that to be compliant the VTX does not transmit on 5645, 5925 or 5945 (not regularly used channels anyways). 5v Output to power your camera - officially rated at 600ma, but typically can power more (like a Runcam Split) No plug - direct solder pads for exceptional durability and repair ease! LED display shows channel, band, and power Button allows easy change of channel, band, and power SMA Pigtail included Only 6.5 grams Audio Control Control your VTX, and it's settings, easily and quickly through your OSD and the Audio pad on the Mach 3. Select "Smart Audio" in the Betaflight configurator to enable. Betaflight OSD will show the standard 25mw, 200mw, 500mw, and 800mw, while the Mach 3 will in fact be putting out 25mw, 200mw, 600mw, and 1000mw.  VTX Tables  For Betaflight 4.1 onward, paste the text in this txt file into the CLI in Betaflight Configurator and type "save"Audio Control not your thing? Don't worry - there's still an easy to read LED and button to control the VTX! MMCX Many are moving to MMCX because it is more durable than U.FL, as well as being easier to maintain and change out antennas. With U.FL, you have to be sure to secure the pigtail - either glue it, tape it, or find some other way. Otherwise, U.FL could easily pop off mid flight or during a crash. With MMCX, you simply snap in your antenna, and you are off to the races - literally! The downside to MMCX is it is more bulky than U.FL. For some builds this may be a problem - but for most it will not be.  Variable Power With 0/25/200/600/1000mw power options, the Mach 3 Video Transmitter is perfect for any application. Whether it's race day at MultiGP or ripping through a mountain range at long distance, the Mach 3 has the power option you require. Direct Solder Pads They are easy to setup, and easy to keep in the air! With pre-tinned solder pads, your VTX can be setup in mere seconds.Fixing them after a sweet crash, is just as easy. No more trashing VTXs just because a little connector is broken! Microphone A microphone AND Audio Control?! Yeah, we did it. And yeah, it works great! Enjoy! Clean Video &  5V Out The Mach3 comes with an onboard 5v regulator to power your camera. It also comes with strong onboard filtering to give you some seriously clean video! If your video is not perfect, please contact us and we will work with you on a case-by-case basis to see what is causing issues on your build!   Note: The U.FL pigtail is held with a small dab of solder. Best practice is to remove before removing the pigtail. To do this, heat your soldering iron, and gently press against the solder until it can be removed. Easy peasy!  Manual Download Link  VTX Table for Betaflight 4.1+ Includes 1x Mach 3 VTX 1x SMA MMCX Pigtail 1x Instruction Manual 1x Set of silicon wires Measurements: MMCX: 30.5(H) x 20(D) x 8 (W) mm   7 Mile Long Range Flight With Mach3 VTX Trusting Your Gear FPV REGULATORY NOTICE The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Read more less

New from RUSHFPV, the Max Solo VTX can output 1W+! Combined with its stylistic heat sync, you'll never run into any overheating issues. This is a beast of a VTX.  Make sure an antenna is ALWAYS connected while the VTX is on and do not run this VTX on higher power outputs without proper airflow! Be sure to check out our other Rush FPV Products and our wide variety of video transmitters! Specifications:     Item Name: Rush Max Solo     Input Voltage: 7-36V DC     Output Voltage: 5V (500mA)     Channels: 37CH     Power: PIT/25/500/1000+ mW/Max     Audio: Support audio input     Dimensions: 40x24x10.5mm     Weight: 15g(without cable)     Audio In: 6.5M Mono Includes: 1 x RUSHFPV Max Solo 25-1000mW+ 5.8GHz VTX - MMCX 1 x MMCX Whip Antenna 1 x MMCX to SMA Adapter Cable   FPV REGULATORY NOTICE The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Read more less

The SpeedyBee TX800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations. Check out our other MMCX VTXs, as well as the rest of our SpeedyBee products!  Specifications Input Voltage: 3.7-5V RF Output Power: 25 / 200 / 400 / 800mW Control Protocol: IRC Tramp Protocol Output Voltage: 5V Antenna Connector: MMCX Power/Video Connection: 4 Pin JST / Solder Pads Stack Size: 20x20mm m3 Weight: 5.6g Includes 1x SpeedyBee TX800 20x20 25-800mW 5.8GHz VTX - MMCX 1x SMA to MMCX Pigtail 1x MMCX Dipole Antenna 1x Wiring Harness Manual Speedybeetx800

Read more less

The T-Motor FT800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations. Check out our other MMCX VTXs, and all our T-Motor products! Specifications Input Voltage: 7-36V RF Output Power: 25 / 200 / 500 / 800mW Control Protocol: Smartaudio2.1 Output Voltage: 5V Antenna Connector: MMCX Power/Video Connection: 4 Pin JST / Solder Pads Stack Size: 20x20mm m3 Weight: 7.58g VTX table: T-Motor FT800  Includes 1x T-Motor FT800 20x20 25-800mW 5.8GHz VTX - MMCX 1x SMA to MMCX Pigtail 1x MMCX Dipole Antenna 1x Wiring Harness

Read more less

The Walksnail Avatar HD Nano Camera V3 /  Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles such as the Walksnail Avatar and Fat Shark HD Dominator. The Avatar V3 is the upgraded version of the Avatar 1S, where the V3 improves with 32G of storage, 500mW of power, a native 4:3 sensor, and a wide voltage range of 3.1-13V.  Check out all our Walksnail HD products and check out all our Walksnail compatible products! Features 3.1~13V 500mW FOV160° Metal case 1080P/60fps 4:3 native sensor Built-in 32G storage 18.5g light-weight Nano Camera 14x14mm Walksnail Avatar HD Nano Kit V3 The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail. Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. Nano camera V3 with dimensions of 14*14cm and a weight of only 3g, equipped with a 2.1mm lens and 160° FOV, provides clearer and more realistic image quality. The Avatar VTX comes with 32g built-in storage, it can record 1080p HD and interference-free flight footage without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos. Canvas Mode: supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control. Q: Can I use analog channels?/Can I fly with other analog pilots? A: Yes, when you upgrade the firmware to 34.40.15 version, need switch to racing mode. Specifications Camera Model: Avatar HD Nano Camera V3 Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor Resolution: 1080P/60fps,720P/120fps,720P/60fps Ratio: 4:3 native / 16:9 Lens: 2.1mm FOV: 160° Aperture: F2.0 Shutter: Rolling Shutter Min.Illumination: 0.001Lux Weight: 3g （without cable） Dimensions: 14x14x16.8mm Coaxial Cable: 90mm(default)/140mm VTX Model Avatar HD Mini VTX V3 Communication Frequency 5.725-5.850GHz Transmitter Power (EIRP) FCC:<27dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm I/O Interface JST1.0x4(Power in)JST0.8x4(USB) Mounting Holes 25.5x25.5mm(M2 hole);20x20mm(M3 hole) Dimensions 31.5x31.5x9.4mm Storage 32G Recording 1080p/720p Weight 13.4g Operating Temperature -20-40℃ Channels 8 Wide Power Input 3.1V-13V Supported FC System Betaflight; Inav; Fettec; Kiss; ArduPliot OSD Canvas mode Latency Average latency 22ms Antenna 1(IPEX) VTX Antenna Model: Avatar V2 antenna Polarization: LHCP Bandwidth: 5600MHz-6000MHz Average Gain: 1.9dBi VSWR: ≤1.5 Interface: IPEX-1 Line Length: 105mm Dimension: R15x45mm(without cable) Weight: 2g Includes 1x Walksnail Avatar HD Nano V3 VTX Kit w/ Nano Camera 1x 4 Pin USB Cable 1x 4 Pin Power Cable 2x M2x4/5/6mm Screws 4x M2x14mm Screws   4x M2x5x0.5mm washer 5x 2.1x3.4x1mm Gasket 1x 14 to19mm bracket

Read more less

Spare replacement VTX module for Walksnail HD Micro and Nano VTX Combos. Check out all our Walksnail HD products! Includes 1x Walksnail Avatar HD VTX Module

Read more less