RaceDayQuads
RaceDayQuads Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC
The Aikon AK32 Pro II continues Aikon's pursuit of excellence! This ESC combines the latest forward-looking capabilities with top of the line reliability. Make sure to check out our other ESCs and entire line of Aikon gear! Specifications Input Voltage: 2-6S MCU: AT32F421 Max Continuous Current: 50A Max Burst Current: 65A Firmware: BLHeli32 Bootloader: Yes Mounting Pattern: 20x20mm Weight: 13.8g Includes 1x Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC
$76.99
RaceDayQuads AxisFlying Argus 32bit 65A 3-6S 30x30 4in1 ESC
Another great addition to the AxisFlying lineup, with 3-6S input, BLHeli32 firmware, and up to 75A burst, the Argus 65A 4in1 ESC will handle even the most amp-hungry motors. Check out all our 30x30 ESCs and all our Axis Flying Products! Specifications Continuous Current: 65A Burst Current: 75A Input Voltage: 3-6S ESC Target: BLHeli_32 (ST_G0_04) Current Proportion value: Scale=400 PWM Frequency Range: 16-96khz Telemetry: Supported Ammeter: Supported BEC: No Installation holes: 30.5x30.5mm Dimensions: 48.6x44x6.3mm Weight: 16.2g Includes 1x AxisFlying Argus 32bit 65A 3-6S 30x30 4in1 ESC 1x Wiring Set
$89.89
RaceDayQuads AxisFlying Argus PRO 32bit 65A 3-6S 30x30 4in1 ESC
New from AxisFlying, the Argus PRO 32bit 65A ESC. The Argus PRO series uses a wrapped all-aluminum cover that can get IP54 to protect the PCB. The Argus series is PCB electronic only. This is a premium-built ESC from AxisFlying, fully capable of pushing 6S! Check out all our 30x30 ESCs and all our Axis Flying Products! Features Dustproof and waterproof IP54, with splashproof function, it is forbidden to put it into water or use it underwater! CNC Full aluminum cover wrapped, enlarging the radiating surface, rapid heat dissipation, more stable work High-quality and large-size MOSFETs are selected, with low internal resistance and low heat generation, plus CNC heat dissipation aluminum cover, Even if the throttle is used for a long time, it is not afraid of overheating, which brings more stable power performance. Specifications Continuous Current: 65A BLHeli_32 32bit Burst Current: 75A Size: 30.5x30.5mm M3 BEC: No Weight: 32g Input Voltage: 3-6S LiPo (12-30V Max) ESC Target: BLHeli_32 (ST_G0_04) Current Proportion Value: Scale = 400 PMW Frequency Range: 16-96khz Telemetry: Supported Ammeter: Supported BEC: No Installation Holes 30.5x30.5mm Size: 48.6x46.6x8.7mm Weight: 32g Includes 1x AxisFlying Argus PRO 32bit 65A 3-6S 30x30 4in1 ESC
$99.89
RaceDayQuads CLRacing 32Bit 45A V2 2-6S 30x30 4in1 ESC
Check out this ESC with 32Bit for processing and 45Amps to work with, making this 30x30 4in1 board a great choice for your builds. Also this is the replacement ESC for the CLRACING F7/4in1 stack combo. If used with other flight controllers please make sure you have the correct harness pinout to avoid damaging your flight controller. Check out all our 30x30 ESCs and our full range of CLRacing products! Specifications Input Voltage: 2-6S Max. Continuous Current: 45A Max. Burst Current: 55A Firmware: BLHeli_32 Support: Dshot300-1200/MultiShot/OneShot/ProShot/PMW Current Sensor: Yes Current Sensor Scale: 250 Dimensions 43.5mm x 46.5mm Mounting Dimensions: 30.5x30.5mm Φ4mm Size : 43.5mm x 46.5mm Weight: 13.5g Includes 1x CLRacing 32Bit 45A V2 2-6S 30x30 4in1 ESC 10x M3x5mm nylon thread through spacers 5x M3x25mm nylon screws 5x M3 nylon nuts 5x Yellow Grummits 2x 14 AWG 80mm Silicone wires 1x connection cable 1x Amass XT60 1x Rubycon 1000uf 35v ZLH capacitor
$78.99
RaceDayQuads DarwinFPV Bluejay 8Bit 30A 3-4S 20x20 4in1 ESC
DarwinFPV 3-4S 30A ESC is currently the cheapest in the FPV world and a direct replacement for the Cineape, designed to reduce the budget of entry-level FPV pilots as much as possible. At the same time, we have also filled the ESC with glue, which greatly reduces the risk of damage to components caused by frequent crashes by novices. Check out our other 20x20 ESCs and our Darwin FPV products! Specifications Input Voltage: 3-4S MCU: EFM8BB21 Max Continuous Current: 30A Max Burst Current: 35A Firmware: Bluejay G_H_30 Mounting Pattern: 20x20mm Weight: 4.9g Includes 1x DarwinFPV Bluejay 30A 8Bit 3-4S 20x20 4in1 ESC
$29.99
RaceDayQuads Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC
Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor. Check out all our 20x20 ESCs and all our Diatone Gear! Specification Input voltage: 4~6S Lipo (16.8V~25.2V) Continue Current: 44A×4 Burst current: 54A (10S) BEC: No Target： BLHeli_32 MAMBA5_Reactor_44 SOFT: DSHOT300/600/1200/MAX2400（FETTEC） PWM: 24~128K Mounting size: 20mm, M2 Includes 1x Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC 2x 8pin sh1.0 1x AMASS Original XT60 1x High Frequency 470uF/35V
$53.99
RaceDayQuads Diatone Mamba F30 Mini 30A 2-5S 20x20 4in1 ESC
Spare replacement part for Diatone Mamba F405 Mini Stacks. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input voltage: 2-5S Continuous Current :30A Peak Current: 40A ESC Firmware: BLHeli_S Agreement: DShot 300/600 BEC: NO Size: 29.0×29.0×5.5mm Mounting: 20x20,M2 Weight: 6g Includes 1x Diatone Mamba F30 Mini 30A 20x20 4in1 ESC
$37.99
RaceDayQuads Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 20x20 4in1 ESC
Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input Voltage: 2~6S Max Continuous Current: 40A Max Burst Current: 45A BEC: No Target：BLHeli_32 MAMBA F40_128K_MINI Protocol: Dshot300/600/1200 PWM Range: 24~128K TVS Protection: Yes Mounting Pattern: 20x20 M2/M3 Includes Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 4in1 ESC 2x 8pin sh1.0 1x AMASS XT60 1x High-Frequency 470uF/35V Capacitor
$45.99
RaceDayQuads Diatone Mamba F50_BLS 50A 3-6S 30x30 4in1 ESC
A great ESC with plenty of power at a desirable price point. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input Voltage: 3-6s (12.6-25.2v) Continuous Current: 50Ax4 Burst Current: 60A (10s) BEC: No Software: DShot300/600 BLHeli_S CH40 TVS Protection: Yes Mounting: 30x30mm M3 Includes 1x Diatone Mamba F50_BLS 50A 3-6S 30x30 4in1 ESC
$43.99
RaceDayQuads Diatone Mamba F55 128K 32Bit 55A 3-6S 30x30 4in1 ESC
Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input Voltage: 3~6S Lipo (12.6V~25.2V) Max Continuous Current: 55A Max Burst Current: 65A BEC: No Target：BLHeli_32 MAMBA F55_128K Protocol: Dshot300/600/1200 PWM Range: 24~128K TVS Protection: Yes Mounting Pattern: 30x30 M3 Includes 1x Diatone Mamba F55 128K 32Bit 55A 3-6S 30x30 4in1 ESC 2x 8pin sh1.0 1x AMASS XT60 1x High-Frequency 470uF/35V Capacitor
$54.99
RaceDayQuads Diatone Mamba F65 128K 32Bit 65A 3-6S 30x30 4in1 ESC
Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input Voltage: 3~6S Lipo (12.6V~25.2V) Max Continuous Current: 65A Max Burst Current: 75A BEC: No Target：BLHeli_32 MAMBA F65_128K Protocol: Dshot300/600/1200 PWM Range: 24~128K TVS Protection: Yes Mounting Pattern: 30x30 M3 Includes 1x Diatone Mamba F65 128K 32Bit 65A 3-6S 30x30 4in1 ESC 2x 8pin sh1.0 1x AMASS XT60 1x High-Frequency 470uF/35V Capacitor
$79.99
RaceDayQuads EMAX Bullet 2-4S 30A ESC
Highest performance, smallest size, lightest weight - that is what the EMax Bullet 30 amp ESC offers. At a mere 3.9g (nearly half the weight of the closest competitor), and measuring 11.9 x 19.6mm, this ESC is TINY. This ESC is capable of running all major protocols, including DShot 600, 300, and 150, and Multishot, and Oneshot 42/125. It comes pre-loaded with BLHeli 16.5, meaning you're ready to run out of the box. Check out our ESC selection ! Features The market's lightest and smallest ESC, designed specifically for high-level FPV racing. Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise. Supports new digital signal: DSHOT, and analog signals: MULTISHOT, ONESHOT42, ONESHOT125. Top quality MOSFET, ceramic capacitors. 3oz high TG PCB board, significantly improves heat dissipation and improves system efficiency. New aluminum heat sink, offers protection from propeller strike damage. Features high-temperature silicone signal cable for wire flexibility and ease of installation. Specifications Con.Current: 30A Input Voltage: 2-4S Weight: 3g Includes 1x EMAX Bullet 2-4S DShot600 30A ESC
$22.79
RaceDayQuads EMAX Formula Series 32Bit 2-5S 45A ESC
EMAX Bullets have been the go-to for size vs power for racers this year so it is only natural that EMAX pushes the limits again with the amount of power we can fit into ESCs. With them also being 45a, 32bit, and can handle up to 5S, we have a new front-runner for next level performance. Introducing the new Formula32 ESC from EMAX, our first in a series of BLHELI32 specific SCs. Lightweight and small in width, the Formula32 provides 45 amps of power using DSHOT1200 in order to provide you with the smoothest flight possible. Combined with F3-F7 Flight Controllers capable of 32K looping, the Formula32 will deliver efficient and controlled power to your high speed racing drone. Check out our ESC collection, and our selection of EMAX gear! Specifications Input voltage: 2-5S Lipo BEC: NO Continue Current: 45A Burst current: 55A Firmware: BLHeli_32 Weight: 2.6g (w/o wire) MCU STM32F051 using BLHeli_32 DSHOT up to 1200 Includes 1x EMAX Formula Series 2-5S 32Bit DShot1200 45A ESC
$34.19
RaceDayQuads FETtec 65A 3-6S 30x30 4in1 ESC
FETtec has released a 4-In-1 8S 65A DShot 2400 ESC to complement the FETtec Flight Controllers and KISS Flight Controllers. With full sine wave control and all the latest features, this is the perfect ESC to pair with the new flight controller. Check out all our KISS compatible gear, and everything FETtec! Features No more capacitors close to the mounting holes Specifications Active current limiting @ 65A Input voltage: 3S-8S High quality 40V MOSFETs STM32G071 @ 64MHz 128 kHz Motor PWM Full sine wave control Soldering holes for up to 5 additional capacitors KISS FC Passthrough Betaflight Passthrough (available in 4.1) Automatic input signal detection:Dshot 300-2400,PWM,OneShot 42/125,OneWire BUS with up to 8kHz looptime (one cable for all Motorsignals and Telemetry),S2M Firmware: New FETtec Firmware FETtec Configurator for updated, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome Plugin FETtec 4in1 ESC 65A Manual FETtec Configurator Includes 1x FETtec 65A 3-6S 30x30 4in1 ESC
$135.99
RaceDayQuads FETtec V1.1 35A 3-6S 20x20 4in1 ESC
The FETtec 35 amp 4in1 ESCs is a great board on its own, now the magic comes from KISS FC Passthrough and other KISS Features. For example Dshot2400, 128kHz motor PWM, Dshot 300-2400, and 128kHz motor PWM. As being version 1.1 they fixed issues like not having to install a capacitor close to the mounting holes. You will see an increased area around the battery soldering pads for safer use. Also adding a new protection circuit for the signal IOs to the board. One blue LED for each ESC onboard, grab this 20x20 board for those quads that need them! The perfect compliment to your FETtec Kiss FC! Check out all our KISS compatible gear, and everything FETtec! Features More space around battery pads One blue LED for each ESC onboard New protection circuit for the signal IOs No more capacitors close to the mounting holes Specifications Active current limiting @ 35A Input voltage: 3S-6S High quality 40V MOSFETs STM32G071 @ 64MHz 128 kHz motor PWM Weight: 6.4g(board only) Full sine wave control Solder points for up to 5 additional capacitors KISS FC Passthrough Betaflight pass-through (available from 4.1) Automatic input signal detection: Dshot 300-2400 PWM OneShot42 / 125 OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry) New FETtec Firmware FETtec Configurator for updated, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome Plugin Dimensions: 30mm x 35mm Mounting hole: 20mm x 20mm, M2 breakable for M3 Manual DownloadFETtec Configurator Includes 1x FETtec 35A V1.1 3-6S 20x20 4in1 ESC 1x Capacitor 50V, ESR < 1ohm (477CKE050M) 1x JST-SH 8 Pin Cable
$73.99
RaceDayQuads Flycolor Raptor5 32Bit 3-6S Individual ESC - Choose Version
High performance, small size, light weight - that is what the Flycolor Raptor 5 series have to offer. Flycolor Raptor 5 ECS's by Flycolor is perfect for fixed-wing RC Drones! Choose your Amp, from a range of 20A, and 35A. Check out our Individual ESC selection and all our Flycolor Products! Features ARM 32-bit Cortex MCU STM32G071, frequency up to 64 MHZ, 25% higher than the previous generation of MCU. Compared with the previous generation of ESC, it has better routing and component layout. Supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us). The input signal is automatically detected by the ESC upon power up. Features high-temperature silicone signal cable for wire flexibility and ease of installation. The silicone twisted-pair of throttle signal cable, increases the service life and effectively reduces the crosstalk caused by signal transmission, and makes flight more stable. Specifications 20A Model: Raptor5 G071-20A Battery: 3-6S Con. Current: 20A Burst Current(10S): 25A BEC: No Weight: 6.5g Size: 29x14x6mm Firmware: Flycolor_Raptor_5 Typical Applications: FPV 35A Model: Raptor5 G071-35A Battery: 3-6S Con. Current Burst Current(10S) BEC: No Weight: 6.5g Size: 29x14x6mm Firmware: Flycolor_Raptor_5 Typical Applications: FPV 50A Model: Raptor5 G071-50A Battery: 3-6S Con. Current 50A Burst Current(10S): 60A BEC: No Weight: 10.2g Size: 33x16x6mm Firmware: Flycolor_Raptor_5 Typical Applications: FPV Includes 1x Flycolor Raptor 5 3-6s Individual ESC - Choose your Amp Wiring Diagram
$20.99
RaceDayQuads Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC
The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV. Achieve more security for your flights with the Trinx G20! Check out all our 20x20 ESCs and all our Flycolor Products! FEATURES ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz. PWM frequency up to 128K, high frequency for higher throttle makes running smoother. Compared with the previous generation of ESC, the ESC firmware is optimized, making the throttle linearity smoother and the response faster. Miniaturized and lightweight design, better routing, and component layout. 20x20 mounting holes to meet the installation requirements of diversified frames. Built-in current sensor and VBAT output. Supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us). The input signal is automatically detected by the ESC upon power-up. All Dshot and Proshot signals are supported. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling. Supports higher power load, more suitable for violent flight of racing drones. Conformal coating for extra protection Large soldering tabs Low ESR capacitor and XT60 cable included Specification Model: Flycolor TRINX G20 Con. Current: 60A Burst Current: 70A (10s) BEC: No BEC LiPo cells: 3-6S Weight: 14.4g Size: 44x36x6.3mm Mounting: 20x20mm,M3 Configurator: BLHeliSuite32 Firmware: Flycolor_Raptor_5 Includes 1x Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC 4x Silicone vibration absorber 5x O-Ring 1x Power cable+XT60 1x FC/ESC connecting wire 1x Low ESR capacitor 1x Aluminum heat sink
$49.99
RaceDayQuads Flycolor Trinx G5 32Bit 45A 3-6S 30x30 4in1 ESC
Check out the Flycolor Trinx G5 45A 4-in-1 ESC, as the Flycolor X-Cross Series ESC’s are on a fast rise to the top. With 45A of continuous current support, you will have plenty of headroom to push your rig to the limit. When you see this Trinx G5, you should think about dependability and power. Let this be your next choice for your 30x30 spot on your next big build. With the high powered MCU and Raptor 5 firmware, this is path towards the next level for your builds! Check out all our 4in1 ESCs, all our 30x30 ESCs, and all our Flycolor Products! Features ARM 32-bit Cortex MCU STM32G071, with a frequency up to 64 MHZ, where that's 25% higher than the previous generation of MCU. PWM frequency up to 128K, high frequency for higher throttle makes running smoother. Multiple Protocols, where all Dshot and Proshot signals are supportedSupports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multshot. 4in1 ESC built-in current sensor and VBAT output. Aluminum heat sink, with a large surface area of aluminum heat sink can effectively slow down the temperature rise, hence giving longer and better performance when pushing your quad. Damping design, hence reducing the effect of vibration on the flight controller.Supports higher power load, more suitable for violent flight or racing drone. Specifications MCU:STM32G071 LiPo Power input: 3-6S Cont.Current: 45A Burst Current: 55(10s) BEC: No Weight: 19.6g (with heat sink) Dimensions: 45x41x8.3mm Mounting holes: 30.5x30.5mm (M3) Throttle Calibration: Supported ESC Programming: BLHeliSuite32 Application: 170-450 Multi Firmware: Flycolor_Raptor_5 Includes Flycolor Trinx G5 32bit 45A 3-6S 30x30 4in1 ESC 4x Silicone Vibration absorber 5x O-Ring 1x Power Cable with XT60 1x FC/ESC connector wire 1x Low ESR Capacitor 1x Heat sink User Manual
$66.99
RaceDayQuads Flywoo GOKU 406S 8Bit 40A 2-6S 20x20 4in1 ESC
The Flywoo GOKU 406S 40A 4-in-1 ESC brings serious power in the 20x20 game! Stackable with other mini FCs like the GOKU F722 Mini F7 Flight Controller. Please note that this ESC works best with Flywoo series flight controllers. 8 Pin from left to right, GND, BAT, M1, M2, M3, M4, CUR, TX. Therefore, when using other brands' FCs, please make sure the connector is compatible. Check out all our 20x20 ESCs and all our Flywoo products! Specifications GOKU 406S 8bit 40A ESC Con. Current: 40A Burst Current: 45A Input Voltage: 2-6S Support DShot300/600 Current Sensor: YES BEC Output: NO Size: 42×42×4mm Mounting Hole: 20x20mm (M3) Includes 1x Flywoo GOKU 406S 8Bit 40A 2-6S 20x20 4in1 ESC
$32.99
RaceDayQuads Flywoo GOKU 406S 8Bit 40A 2-6S 20x20 4in1 ESC
The Flywoo GOKU 406S 40A 4-in-1 ESC brings serious power in the 20x20 game! Stackable with other mini FCs like the GOKU F722 Mini F7 Flight Controller. Please note that this ESC works best with Flywoo series flight controllers. 8 Pin from left to right, GND, BAT, M1, M2, M3, M4, CUR, TX. Therefore, when using other brands' FCs, please make sure the connector is compatible. Check out all our 20x20 ESCs and all our Flywoo products! Specifications GOKU 406S 8bit 40A ESC Con. Current: 40A Burst Current: 45A Input Voltage: 2-6S Support DShot300/600 Current Sensor: YES BEC Output: NO Size: 42×42×4mm Mounting Hole: 20x20mm (M3) Includes 1x Flywoo GOKU 406S 8Bit 40A 2-6S 20x20 4in1 ESC
$32.99
RaceDayQuads Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC
The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings! Specifications Input Voltage: 3-8S LiPo Max. Continuous Current: 65A Max Burst Current: 100A Telemetry: Yes Firmware: BLHeli_32 Target: FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9 Input Signal: DShot 150/300/600/1200/MultiShot/OneShot BEC: No Mounting Pattern: 30x30mm M3 Dimensions: 42.5x42.5mm Weight: 14.8g Includes 1x Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC Wiring Diagram
$84.99
RaceDayQuads Foxeer Reaper F4 Mini 128k 32bit 60A 3-8S 20x20 4in1 ESC
We've come to expect the best out of Foxeer and the Foxeer Reaper series is their flagship series with high-quality electronics. The Foxeer Reaper F4 Mini ESC is precisely what we come to expect out of our ESCs. Fewer desyncs thanks to the powerful F4 chip. Bigger, high-quality MOSFETs, super smooth flights and supports input voltage up to 40V. It's no wonder why Foxeer is a leader in the industry with their excellent Reaper series. Check out the rest of our 20x20 ESCs, as well as the rest of our Foxeer offerings! Features 3-8S LiPo Compatibility 60 Amperage F4 Processor Specifications Firmware: FOXEER_ReaperM4IN1_F4_60A_128_Multi_32_9 Continuous /Burst Current: 60Ax4 / 100Ax4 Input Voltage: DC 9V~40V (3-8S Lipo) BEC: No Telemetry: Supported ESC Programming: BLHeli32 Current Scaling: 70 Input Signal: DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature: -20℃ ~ +55℃ Working Humidity: 20～95% Storage Temperature: -20℃ ~ +70℃ Mounting Hole: 20×20mm, Φ4mm/ M3 Dimension: 40.5×40×5.5mm Weight: 13.5g Includes 1x Foxeer Reaper F4 32bit 60A 3-8S 20x20 4in1 ESC
$79.89
RaceDayQuads Foxeer Reaper F4 Mini V1.3 128K 32Bit 45A 3-6S 20x20 4in1 ESC
The Foxeer Reaper F4 Mini 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out the rest of our 20x20 ESCs, as well as the rest of our Foxeer offerings! Specifications Firmware: FOXEER_ReaperM4IN1_F4_45A_128_Multi_32_9 Continuous /Burst Current: 45Ax4 / 65Ax4 Input Voltage: DC 10V~26.2V (3-6S Lipo) BEC: No Telemetry: Supported ESC Programming BLHeli32 Current Scaling:115 Input Signal: DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature: -20℃ ~ +55℃ Working Humidity: 20～95% Storage Temperature: -20℃ ~ +70℃ Mounting Hole: 20x20mm, Φ4mm/ M3 Dimension: 40.5x33x5.5mm Weight: 10g Includes 1x Foxeer Reaper F4 Mini V1.3 128K 32Bit 45A 3-6S 20x20 4in1 ESC Wiring Diagram
$59.89
RaceDayQuads HAKRC HK3220 32Bit 60A 2-8S 20x20 4in1 ESC
The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling. Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at RaceDayQuads! Features PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation. MOS adopts imported high current resistance MOS, long life with strong load capacity. Adopt industrial grade LDO, high temperature resistance. Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance PWM frequency up to 128k, high frequency for higher throttleRuns smoother. Specifications ESC firmware: HAKRC_AT4G_Multi_32.9 Hex Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input voltage: 2S-8S Lipo Continuous current: 60A Peak current: 70A Size: 34 x 42mm (20mm-20mm mounting hole) Product net weight: 11g Includes 1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC 1x XT60 Connector 1x 12AWG 6cm Power Cable 1x 35V 470uF Capacitor 1x 8Pin JST ESC to FC cable 4x M3 Grommets. 4x M2 Grommets
$75.99
RaceDayQuads HGLRC SPECTER 8Bit 60A 2-6S 30x30 4in1 ESC
This budget-friendly ESC is super easy to use with its large pads. Plus, the immersion gold high-tech design is temperature-resistant and current-resistant for long-term durability, Capable of supporting up to 60A of power and up to 70A burst current! Interested in the HGLRC SPECTER F405 V2 2-6S 30x30 Flight Controller - MPU6000? Check out our other 30x30 ESCs and all our HGLRC products! Features Blheli_S firmware can be replaced with Bluejay firmware to make RPM filters available. 2S capable Is capable of supporting 70A burst current for up to 10 Seconds Budget-friendly price point Specifications Input Voltage: 2-6S Lipo (7.4V-22.8V) Installing Hole: 30.5x30.5mm, M3 Support Protocols: DShot600/300/150/Oneshot125/42,MultiShot Constant Current: 60A Peak Current: 70A（10s） ESC Firmware: BL_S (J-H-30) Size: 37x42.7mm Includes 1x HGLRC SPECTER 8Bit 60A 3-6S 30x30 4in1 ESC 1x Accessories
$33.99
RaceDayQuads HGLRC SPECTER G071 128K 32Bit 60A 3-6S 20x20 4in1 ESC
HGLRC SPECTER 128K 32Bit 60A 3-6S 20x20 4in1 ESC comes with an advanced STM32G071 BL32 processor for fast computing, a smoother control experience, and superior responsiveness. It features an ESC with BL32 firmware and a PWM frequency of 128K. Plus, you'll appreciate its immersion gold pads for reliable connections, 6-layer board design to sustain higher temperatures, and integrated CNC heat sink to maximize performance. With a built-in ammeter and support for DShot600/300/150 and Oneshot125/24/MultiShot, this ESC delivers. Plus, its nano-scale coating helps protect against water, moisture, and corrosion. Interested in the HGLRC F760 Mini F722 3-6S 20x20 Stack/Combo (F7 FC / G071 32Bit 60A 4in1 ESC) - MPU6000? Interested in just the HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller - MPU6000? Check out the rest of our 20x20 ESCs, and all our HGLRC products Specifications HGLRC SPECTER 60A 3-6S ESC Input voltage: 3-6S Continuous Current: 60A Burst Current: 65A (10 Seconds) MCU: STM32G071 Firmware: BL32 ( SPECTER60_G_128) Size: 44mmx36mmx7mm Mounting: 20x20, M3 Support protocols: Dshot600/300/150/Oneshot125/42, MultiShot Weight: 19.5g Includes 1x HGLRC SPECTER 128K 32Bit 60A 3-6S 20x20 4in1 ESC 1x 30AWG 25mm double-ended SH1.0-8P cable 1x 12AWG 100 power cord (black/red) 1x XT60H-M black male connector 1x 50v 470UF solid capacitor
$75.99
RaceDayQuads HGLRC Zeus 60A 3-6S 30x30 4in1 ESC
The HGLRC Zeus ESC is a 60A 4-in-1 ESC with a 30.5x30.5 mounting pattern. The heat sink design makes this perfect for freestyle FPV racing by providing heat dissipation for high power and improved stability, and increased shock absorption. Make sure to check out our other 30x30 ESCs and the rest of our HGLRC FPV Products. Specifications Input Voltage: 3-6S Max Continuous Current: 60A Max Burst Current: 65A (10s) MCU: STM32F051 Firmware: BLHELI32 Weight：18g Dimensions: 45x40x6.5mm Includes 1x HGLRC Zeus 60A 3-6S 4-in-1 BLHeli_32 ESC 4x M3 Shock Absorption (Red) 1x Connecting Wire (XT60H) 1x SH1.0 8PIN Cable 60mm 1x Capacitor
$75.99
RaceDayQuads HobbyWing Skywalker 12AE 2-3S Individual 12A ESC
This HobbyWing Skywalker 12A 32Bit 2-3S Individual ESC is a high-performance, reliable speed controller for small airplanes, helicopters, and multi-rotor drones. It has a high-speed processor to ensure smooth, powerful operations, and supports 2-3S LiPo batteries. Enjoy a high response rate and low-voltage protection for excellent control and power. Make sure to check out the rest of our wing products and our entire line of HobbyWing gear! Features: Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. Throttle calibration function: Throttle range can be calibrated to be compatible with different transmitters. User programmable. Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field. Compatible with LiPO and NiMH battery. Timing can be changed to be suitable for different brushless motors. Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. Power connectors and motor connectors are not included. Specifications Model: 12AE Refresh rate of the throttle signal: 50Hz to 432Hz. Cont.Current: 12A Peak.Current: 15A Input Vol (Lipo): 2-3S BEC Output: 5V@2A (Linear mode) Size (mm): 38x18x7mm Weight(g): 19 Wires input: 20AWG-100mm Wires output: 20AWG-100mm Output connectors: N/A Programming: Stick / LED program box Firmware update: N/A Weight: 10g Includes HobbyWing Skywalker 12AE 2-3S Individual 12A ESC
$13.99
RaceDayQuads HobbyWing Skywalker 32Bit V2 3-4S Individual 40A ESC
The HobbyWing Skywalker 40A-V2 ESC offers superior performance for air applications with its 32-bit microprocessor running up to 96 MHz, DEO technology to improve throttle response and efficiency, and Normal/Reverse Brake Modes for reduced landing distance. An integrated search mode helps you find lost aircraft, making the Skywalker 40A V2 a reliable and powerful choice for RC enthusiasts. Note: This ESC will not work with BLHeli_32 ESC Firmware Make sure to check out the rest of our wing products and our entire line of HobbyWing gear! Features: High performance 32-bit microprocessor (with a running frequency of up to 96MHz) DEO (Driving Efficiency Optimization) Technology that greatly improves throttle response driving efficiency and reduces ESC temperature. Separate programming cable for connecting the ESC to a LED (program box - Sold Separately) that allows users to program the ESC anytime and anywhere. Normal and Reverse brake modes that can effectively shorten the landing distance for the aircraft. Search mode can help users find the aircraft by the alarm beeps after the aircraft falls into the complex environment. Multiple protection features such as start-up, ESC thermal, capacitor thermal, over-current, over-load, abnormal input voltage and throttle signal the loss will effectively prolong the life of the ESC Specifications p/n: 80060022 Model: 40A V2 Refresh rate of the throttle signal: 50Hz to 432Hz. Cont.Current: 40A Peak.Current: 60A Input Vol (Lipo): 3-4S BEC Output: 5V @ 5A (Switch-mode) Size (mm): 60 x 25 x 8mm Weight(g): 36g Wires input: 14AWG-100mm Wires output: 16AWG-75mm Output connectors: 3.5 Gold Connectors (Female) Programming: Stick / LED program box Firmware update: N/A Weight: 36g Extra Information HWA80060022 Hobbywing Skywalker 40A V2 40Amp Brushless ESC - Manual Skywalker V2.pdf Includes HobbyWing Skywalker 32Bit V2 3-4S Individual 40A ESC
$23.99
RaceDayQuads HobbyWing Skywalker V2 3-7 Wing 60A ESC
HobbyWing has come out with an ESC durable enough to handle even the most high-performance RC Wings. Never worry about your ESC again, with a burst rating of up to 80A! Make sure to check out the rest of our wing products and our entire line of HobbyWing gear! Features Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected Throttle calibration function: Throttle range can be calibrated to be compatible with different transmitters Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection Specifications Input Voltage: 3-7S Max Continuous Current: 60A Max Burst Current: 80A Refresh Rate: 50Hz to 432Hz BEC: 5V@7A Dimensions: 73x30x12mm Weight: 68g Includes 1x HobbyWing Skywalker V2 3-7 Wing 60A ESC
$41.99
RaceDayQuads Hobbywing XRotor Micro 32Bit 65A 4-6S 30x30 4in1 ESC
If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller. Check out all our 4in1 ESCs, all our 30x30 ECSs, and all our Hobbywing products! Features High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance. The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors. All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling. The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us). Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up. The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts. Specifications LiPo Power input: 3S-6S Cont.Current: 65Ax4 Burst Current: 80Ax4 BEC Output: 5V@ 0.6A Input wires: 12AWG-130mm (Red/Black) Output Wire: No wires but solder tabs Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no Weight: 15.0g Size: 52x42x6.6mm Mounting holes: 30.5x30.5mm Throttle Calibration: Supported ESC Programming: BLHeliSuite32 Includes 1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC
$89.99
RaceDayQuads Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC
Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother. Check out the rest of our 30x30 ESCs, as well as the rest of our Holybro offerings! Specifications Input Voltage: 4-6s Lipo Continuous Current: 65A Burst Current: 70A 10S BEC: No Software: DShot300/600/1200 Telemetry: Yes Mounting: 30x30mm Dimensions: 46x44mm Weight: 15.8gHolybro Includes 1x Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC 2x 8pin Cables 4x Soft Mount Grommets
$87.99
RaceDayQuads iFlight Blitz E45S 45A 2-6S 30x30 4in1 ESC
Another great addition to iFlight's ESC lineup. With 2-6S input, up to 55A bursts, and an integrated capacitor, the iFlight BLITZ E45S 45A 2-6S 30x30 4in1 ESC is a great value option for a 30x30 ESC. Check out all our 30x30 ESCs and all out iFlight gear selection! Specifications Input Voltage: 2-6S Max. Continuous Current: 45A Max. Burst Current: 55A Firmware: BLHeli_S MCU: BB21 Target: QH-40 16.7 BEC: No Telemetry Output: No Current Sensor: Yes Current Sensor Scale: 200 Dimensions 40.5x42x6.5mm Mounting Dimesions: 30.5x30.5mm Φ4mm Weight: 14.7g Includes 1x iFlight Blitz E45S 45A 2-6S 30x30 4in1 ESC 1x Wiring Set
$55.99
RaceDayQuads iFlight Blitz E55 32Bit 55A 2-6S 30x30 4in1 ESC
The next generation of ESCs from iFlight has arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new 55 Amp BLHeli 32 Blitz 4-in-1 ESCs can handle even the most amp-hungry motors. Check out all our 30x30 ESCs and all our iFlight gear selection! Specifications Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 65A MCU: G071 BEC: No Firmware: BLHeli32 Current Sensor: Yes Target: IFLIGHT_BLITZ_G2 Mounting Dimensions: 30.5x30.5mm/Φ4mm Dimensions: 35x42mm Weight: 15.3g Includes 1x iFlight Blitz E55 55A 2-6S 30x30 4in1 ESC 1x Wiring Set
$86.99
RaceDayQuads iFlight Blitz E55 Mini (v1.3) 32bit 55A 2-6S 20x20 4in1 ESC
Another great addition to iFlight's ESC lineup. With 2-6S input, BLHELI32 firmware, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55 55A 2-6S 20x20 4in1 ESC is a great value option for a 20x20 ESC. Check out all our 20x20 ESCs and all our iFlight gear selection! Features V1.3 added metal mosfets to the bottom of the ESC for better heat dissipation and performance. Specifications Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 60A MCU: G071 BEC: No Current Sensor: Yes Firmware: BLHeli32 Target: IFLIGHT_BLITZ_G1 Mounting Dimensions: 20x20mm/Φ4mm Dimensions 35x42mm Weight: 11.3g Includes 1x iFlight Blitz E55 V1.3 Mini 32bit 55A 2-6S 20x20 4in1 ESC 1x Wiring Set
$83.99
RaceDayQuads iFlight Blitz E80A X-Class 32Bit 2-8S 80A ESC - CNC Alum Cover
BLITZ E80 BLHeli Dshot600 Single ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz G071 MCU and 11 pieces TDK MLCC total 240UF Low ESR capacitors bring faster-responding speed and a smoother flying experience. Check out all our individual ESCs and all our iFlight gear! Features 2-8S input 80A 8 layers 4OZ copper PCB, better operating load capacity; 11 pieces TDK MLCC total 420UF Low ESR capacitors, lower ripple, and more stable. Top grade NTMFS5C430NL MOSFET, stable and reliable; A 3528 LED for power- on display; Rational layout, large soldering pad, countersinks, and semicircle orifices enable each layer to be energized after power-on. Specification Dimension: 40x17mm Weight: 9.5g without wire Supports 2-8S lipo input STM32G071 MCU, 48Mhz Runs BLHELI 32.X Firmware Capacitance: total 240UF Low ESR BEC: No Supports: DShot DShot150/300/600/MultiShot/OneShot PWM Drive Target: IFLIGHT_BLITZ_G2 Supports Current Sensor Telemetry output Motor Timing Brake on Stop Includes 1x BLITZ E80 Single ESC 1x 50V 470uf capacitor 1x Power cables & ESC signal wire set
$69.99
RaceDayQuads iFlight Blitz Mini E55S Mini (v1.1) 8Bit 55A 2-6S 20x20 4in1 ESC
Another great addition to iFlight's ESC lineup. With 2-6S input, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55S is a great value option for a 20x20 ESC. Check out all our 20x20 ESCs and all our iFlight gear selection! Features V1.1 added metal mosfets to the bottom of the ESC for better heat dissipation and performance. Specifications Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 60A MCU: BB21 BEC: No Current Sensor: Yes Firmware: BLHeli_S Target: QH-50 16.7 Mounting Dimensions: 20x20mm/Φ4mm Dimensions 35x42mm Weight: 11.3g Includes 1x iFlight Blitz Mini E55S Mini (v1.1) 8Bit 55A 2-6S 20x20 4in1 ESC 1x Wiring Set
$36.99
RaceDayQuads JHEMCU BL32 32Bit 45A 3-6S 30x30 4in1 ESC
Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 45 amps. Get ready for smooth, rapid response and precise control. Check out all our 30x30 ESCs, and the rest of our JHEMCU selection! Specifications Input Power: 3-6S(11-27V) Current: 45A BEC: NO Instal Hole: 30.5x30.5xM4 Size: 44x43MM Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX Weight: 15.4g Includes 1x JHEMCU BL32 32Bit 45A 3-6S 4in1 ESC
$39.99
RaceDayQuads JHEMCU BL32 32Bit 60A 3-6S 30x30 4in1 ESC
Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 60 amps. Get ready for smooth, rapid response and precise control. Check out all our 30x30 ESCs, and the rest of our JHEMCU selection! Specifications Input Power: 3-6S(11-27V) Current: 60A BEC: NO Instal Hole: 30.5x30.5xM4 Size: 44x43MM Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX Weight: 15.4g Includes 1x JHEMCU BL32 32Bit 60A 3-6S 4in1 ESC
$44.99
RaceDayQuads NeutronRC BLS 8Bit 50A 2-6S 30x30 4in1 ESC
A budget-friendly option for those looking for powerful 50A 4in1 30x30 ESC for their builds! Check out all our 30x30 ESCs and our NeutronRC collection! Features Main control chip: EMF8BB21F16G main control chip, operating frequency up to 48MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pad adopts an electroplating copper process to avoid the pad falling off during use. 3 oz thick copper, 4+4 double-layer board design, greatly reduces heat, thus improving efficiency. High-performance 50A ESC: Integrating 4 high-performance 50A ESCs, the integration level is so high, the volume is only about the size of a horizontal wire machine, and the installation and wiring become very simple. This unbelievable size and volume is designed for racing-grade crossovers. Rich functions: adopt BLHeli‑S firmware (optional Blujey firmware), powerful performance, rich functions, support multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, use other development boards, or Use cleanflight or Betaflight firmware to setup or upgrade ESCs). PWM hardware drive motor: PWM hardware drive motor, low noise, smoother throttle response. Damped Light technology and regenerative braking function make the deceleration of the motor more sensitive and effective, and the control is more precise. Active power-renewal technology restores battery power and prolongs sailing time. Anti-interference and fast response: not only supports ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high-temperature resistant, and easy to weld. Specifications Item Type: 4 in 1 50A ESC Weight: Approx. 15g/ Material: electronic components Colour: Black+Green ESC size: about 42 x 40 mm Fixing hole: Approx. 30.5 x 30.5 mm/1.2 x 1.2 inches Fixed aperture: M3 Working voltage: 2-6S Maximum continuous working current: 50A Maximum instantaneous current: 60A Supports: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 and Multshot Software: BLHeliSuite/Blujey Firmware version: BL16.7 Application: Suitable for unmanned remote control drones and FPV vehicles, etc. Includes 1x NeutronRC BLS 8Bit 50A 2-6S 30x30 4in1 ESC Wiring Diagram
$36.99
RaceDayQuads NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC
The NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC is the perfect solution for drone pilots who need an efficient, reliable, and programmable ESC. This ESC features a 32-bit processor, 50A current limit, 2-6S LiPo compatibility, and 30x30 mounting, making it the ideal choice for your quad. Check out all our 30x30 ESCs and our NeutronRC collection! Features Main control chip: STM32G071 main control chip, operating frequency up to 64MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pad adopts an electroplating copper process to avoid the pad from falling off during use. 3 oz thick copper, 4+4 double-layer board design, greatly reduces heat, thus improving efficiency. High-performance 50A ESC: Integrating 4 high-performance 50A ESCs, the integration level is so high, the volume is only about the size of a horizontal wire machine, and the installation and wiring become very simple. This unbelievable size and volume is designed for racing-grade crossovers. Rich functions: adopt BLHeli_32 firmware (optional AM32 firmware), powerful performance, rich functions, support multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, use other development boards, or Use cleanflight or Betaflight firmware to setup or upgrade ESCs). PWM hardware drive motor: PWM hardware drive motor, low noise, smoother throttle response. Damped Light technology and regenerative braking function make the deceleration of the motor more sensitive and effective, and the control is more precise. Active power-renewal technology restores battery power and prolongs sailing time. Anti-interference and fast response: not only supports ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high-temperature resistant, and easy to weld. Specifications Item Type: 4 in 1 50A ESC Weight: Approx. 15g Material: electronic components Color: Black+Blue ESC size: about 42 x 40 mm Fixing hole: Approx. 30.5 x 30.5 mm/1.2 x 1.2 inches Fixed aperture: M3 Working voltage: 2-6S Maximum continuous working current: 50A Maximum instantaneous current: 60A Supports: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 and Multshot Software: BLHeliSuite/AM32 Firmware version: BLHeli32 32.9(96K) Application: Suitable for unmanned remote control drones and FPV vehicles, etc. Includes 1x NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC Wiring Diagram
$62.99
RaceDayQuads NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC
The NewBeeDrone Cricket200 V2 is a 55A 3-6S BLHeli_32 4-in-1 20x20 ESC, upgraded to include a full aluminum shield for protection. This new configuration brings an optimized layout, improved power support, and a double-sided heatsink and aluminum shield, which improves protection and heat dissipation from the previous single-sided version. Check out the rest of our 20x20 ESCs, and the rest of our NewBeeDrone products. Features Upgraded version of the first-generation Cricket200 ESC Double-sided heatsink for improved heat dissipation Optimized layout and power support Enhanced durability and reliability Full aluminum shield coverage Heatsink design 8 Layer PCB with 2Oz Copper Signal plug JST1.0 8pin plug with NBD Cricket200FC Specifications Weight: 13.0g Deminsions: 39x29.5x8mm ESC Programming: BLHeli32 Mounting Holes: 20x20mm LiPo Power Input: 3-6S Burst Current: 65Ax4 Cont.Current: 55Ax4 Includes 1x NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC 1x Cricket200 FC to Cricket200 ESC cable 30mm 1x Cricket200 FC to Cricket200 ESC cable 50mm 1x Cricket200 FC to Cricket200 ESC cable 85mm 4x Short Grommets & 4x Long Grommets 1x 470uf 35v Electrolytic capacitor 5x Steel Screw 25mm 13x Nylon Nuts
$99.99
RaceDayQuads RDQ 3-6S 32Bit DShot1200 30A ESC
Reliable, powerful, and available at an amazing price! The RDQ ESC took nearly a year to prototype, test, and finally be approved for release. This ESC was made with the everyday and beginner hobbyist in mind. This version utilizes the latest 32Bit technology making it a perfect option for the beginner or budget conscious builders who prefer 32bit ESCs. It offers the same performance and reliability found in ESCs like the Spedix GS30 while having an assignable LED, 3-6S Lipo input and the ability to solder a 330uf Capacitor directly to the ESC (the two holes in the middle and on the sides of the ESC). Don't mistake the great price for a cheap product. The RDQ 32 Bit 30a ESC is as high of a quality of any ESC on the market today - you're simply getting pricing afforded by large production quantities and RDQ working directly with the factory. The ESC can easily handle the most extreme setups available today - your most demanding 6S setups and motors will fly great on these RDQ ESCs. The individual 32bit 30a ESC can run up to DShot1200 and handle up to 6S. This ESC is packaged "naked" without any wires and features the ability to solder a 330uf Capacitor directly to the two holes in the middle edges of the ESC. If you mount the cap to the esc via the holes, be sure to mount the esc away from prop strike range (either very close to the motor or the center of the frame) and displace the cap appropriately to avoid prop strikes. BLHeli_32 Suite passthrough capable on Betaflight 3.2.2 and newer. For wires, we recommend 18awg wire on the battery leads and 22awg on the signal and ground. RDQ carries both! Check out our ESC selection! Specifications Continuous Current: 30A Burst Current: 40A Input Voltage: 3S-6S Weight: 3.56g Dimensions: 15mm x 30mm Includes 1x RDQ 3-6S 32Bit DShot1200 30A ESC
$15.99
RaceDayQuads RDQ 3-6S BLHeli_S DShot600 30A ESC
Reliable, powerful, and available at an amazing price! The RDQ ESC took nearly a year to prototype, test, and finally be approved for release. This ESC was made with the everyday and beginner hobbyist in mind. While this version doesn't utilize the latest 32Bit technology (it can run up to 6S and DShot 600), it comes in at a great price making it a perfect option for the beginner or budget conscious. It offers the same performance and reliability found in ESCs like the Spedix 30a while being a fraction of the price, and the ability to solder a 330uf Capacitor directly to the ESC (the two holes in the middle and on the sides of the ESC). Don't mistake the great price for a cheap product. The RDQ 30a ESC is as high of a quality of any ESC on the market today - you're simply getting pricing afforded by large production quantities and RDQ working directly with the factory. The ESC can easily handle the most extreme setups available today - your most demanding 6S setups and motors will fly great on these RDQ ESCs. The individual 30a BLHeli_S ESC can run up to DShot600 and handle up to 6S. This ESC is packaged "naked" without any wires and features the ability to solder a 330uf Capacitor directly to the two holes in the middle edges of the ESC. If you mount the cap to the esc via the holes, be sure to mount the esc away from prop strike range (either very close to the motor or the center of the frame) and displace the cap appropriately to avoid prop strikes. For wires, we recommend 18awg wire on the battery leads and 22awg on the signal and ground. RDQ carries both Check out our ESC selection ! Specifications Continuous Current: 30A Burst Current: 40A Input Voltage: 3S-6S Weight: 3.26g Size: 28x15mm Includes 1x RDQ 3-6S BLHeli_S DShot600 30A ESC
$10.99
RaceDayQuads ReduxAir Redux32 Pro F4 128K 32Bit 70A 3-8S 20x20 4in1 ESC
The all-new Redux32 PRO F4 20x20 race ESC. Some of the fastest FPV pilots in the world fly these ESCs and incorporate their feedback to make changes. The REDUX AIR Redux32 Pro F4 128KHz 32Bit 70A 3-8S 20x20 4in1 ESC is a powerful ESC that provides up to 70A continuous current and features a 32-bit processor running at 128KHz PWM frequency. The ESC is designed to handle 3-8S LiPo inputs and uses a 20x20 mounting pattern. Its 4in1 design minimizes weight and maximizes efficiency. Specifications Input Voltage: 3-8S Current: 70A Peak: >80A 10S Mounting: 20x20 Mounting Hole: M4 —> M3 (with grommets) MOSFETs: 5x6 (FULL-SIZE) PWM Frequency: up to 128KHz Protocol: BLHeli_32 Telemetry: Yes Current Sensor: Yes Amp Meter Scale: 200 Includes 1x REDUX AIR Redux32 Pro F4 128KHz 32Bit 70A 3-8S 20x20 4in1 ESC 1x Hardware Kit 1x Accessory Kit (capacitor, grommets, power lead w/XT60 Pigtail, FC plugin harness)
$91.99
RaceDayQuads SkyStarsRC AM60A AM-32 60A 3-6S 30x30 32Bit 4in1 ESC
The SkyStarsRC AM60A AM-32 60A 3-6S 4-in-1 ESC brings tons of great features all in a 30.5x30.5mm mounting pattern. The AM60A AM-32 ESC comes with vibration isolation rubbers to prevent cracks during a crash, comes with large motor pads for easy soldering, and uses aluminum alloy for the heatsink, among other features. Supports Dshot 600/1200 and has a current sensor, when it comes to affordable and powerful ESCs, this is it. Check out all our 30x30 ESCs and our SkystarsRC collection! Specifications Input voltage: 3-6S LiPo Con.Current: 60A Peak Current: 70A(10S) Firmware: AM_32 Support: Dshot 600/1200 Mounting hole : 30.5x30.5mm/M3 BEC: No Product size: 41x46x7.6mm Weight: 18g INCLUDES: 1x SkyStarsRC AM60A AM-3260A 3-6S 30x30 32Bit 4in1 ESC 1x 35v 560uf Capacitor 1x Wiring harness 4x Damping Rubbers
$58.99
RaceDayQuads SkyStarsRC Kramam 50A 3-6S 30x30 32Bit 4in1 ESC
The SkyStarsRC KRAMAM 50A Pro 3-6S BLHeli_32 4-in-1 ESC brings tons of great features all in a 30.5x30.5mm mounting pattern. The KM50 Pro ESC comes with vibration isolation rubbers to prevent cracks during a crash, comes with large motor pads for easy soldering, and uses aluminum alloy for the heatsink, among other features. Supports Dshot 600/1200 and voltage, RPMS & current telemetry functions. Combined with Blheli_32 firmware to make a smooth ESC. Check out all our 30x30 ESCs and our SkystarsRC collection! Specifications SkyStarsRC Kramam 50A 3-6S 30x30 32-Bit ESC Input voltage: 3-6S LiPo / LiHV Firmware: Blheli_32 Continuous Current: 50A Peak Current: 60A (10S) Overcurrent Protection: Yes ESC Protocol: Dshot 600/1200 Mounting Hole Pattern: 30.5mm / M3 BEC: NO Product size: 41x46x7.6mm Weight: 17g INCLUDES: 1x SkyStarsRC Kramam 50A 3-6S 30x30 32-Bit ESC 1x 35v 560uf Capacitor 1x Wiring harness 4x Damping Rubbers
$53.99
RaceDayQuads SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC
SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC has great performance with a maximum current of 60A and a peak current of 80A. This ESC is powerful and reliable, and ideal for use in any 3-6S 20x20 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K and comes with an F4 processor for incredibly smooth usage. Check out the rest of our 20x20 ESCs, and our SkystarsRC collection! Specifications Input voltage: 3-6S LiPo Con.Current: 60A Peak Current: 80A≥ 10S Firmware: BLHeli_32 Support: Dshot 600/1200 Mounting hole : 20X20 mm/M3 BEC: No Product size: 35.8x47x6.5mm Weight: 17g Includes 1x SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC
$64.99
You have seen 48 out of 67 products