1/10 Scale
Xpress XP-10326, Xpress Aluminum Anti-Roll Bar Set
XP-10326, Xpress Aluminum Anti-Roll Bar Set Optional Anti-Roll Bar Set for the Xpress Execute XQ1S! Comes with all mounting hardware and thicknesses of roll-bars for you to setup the car to your liking! This updated version features aluminum balls for smoother and a lighter all up weight. One pack includes front and rear. Feature: For: Xpress Execute XQ1S XQ2S Material: Aluminum/Plastic Color: Black/Red Include: Rollbars (6 pcs) Aluminum Collars (2 pcs) Ball Studs (4 pcs) Set Screws (10 pcs) Ball-ends (8 pcs) This product was added to our catalog on October 21, 2023
$20.49
KYOSHO KYOFAH703BK, Kyosho Fazer Rostyle Sedan Wheels (Black) (2)
KYOFAH703BK, Kyosho Fazer Rostyle Sedan Wheels (Black) (2) Kyosho Fazer Rostyle Sedan Wheels. These optional Rostyle sedan wheels are intended to fit the Kyosho Fazer touring car. Package includes two black Kyosho Fazer Rostyle sedan wheels This product was added to our catalog on August 15, 2022
$8.99
KYOSHO KYO34417T2, Kyosho EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (Green) w/Syncro KT-231P Radio
KYO34417T2, Kyosho EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (Green) w/Syncro KT-231P Radio The Kyosho 1970 Dodge Charger Fazer Mk2 ReadySet was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter. Features: Fully assembled, painted and ready to run Updated design shaft drive full-time 4WD touring chassis (FZ02L) Ultra scale officially licensed body replicates the fine details of the real 1970 Charger Equipped with 2-bevel grease-filled gear diffs on front and rear Large sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 507mm Width: 210mm Height: 128mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Motor: G14L Includes: (1) EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on May 25, 2023
$244.99
KYOSHO KYO34425T1, Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet (Silver) w/Syncro KT-231P+
KYO34425T1, Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet (Silver) w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car LED light unit (KYO97054 - not included) can be attached to the front and rear light buckets, making it even more realistic Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 450mm Width: 195mm (Body width:200mm) Height: 136mm Chassis Height: 8mm(approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on October 23, 2022
$269.99
KYOSHO KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White)
KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White) w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet was created to enjoy R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car Original low-profile semi-slick pattern tires produce superior performance and combine with 15-spoke wheels for stunning visuals. Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter and battery with charger for the chassis Full ball bearings that reduce drive loss are equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 462mm Width: 200mm Height: 136mm Chassis Height: 8mm(approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory-assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for the transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on February 21, 2023
$289.99
Xpress XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm
XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm This is Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm, genuine official replacement part from Xpress. This product was added to our catalog on December 30 , 2023
$14.99
Team Associated ASC92014, Team Associated Arm Mount Inserts
Team Associated Arm Mount Inserts. These are the replacement inserts for the RC10 B6 and B6D buggies. Includes Arm Mount Insert (4) 0, 0 (4) 0, 0.35 (4) 0, 0.7 (4) 0.35, 0.35 (4) 0.7, 0.7 This product was added to our catalog on October 28, 2023
$9.99
Xpress XP-10128, DRIVESHAFT PROTECTOR BLADE
XP-10128, DRIVESHAFT PROTECTOR BLADE Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ1S XQ2S XM1S FT1S FM1S DR1S, GripXero D1 Material: Thermoplastic Color: White Include: Driveshaft Protector Blades (8 pcs) This product was added to our catalog on October 20, 2023
$6.99
Racers Edge RCE3340, Racers Edge - 20,000cst 70ml 2.36oz Pure Silicone Diff Oil
RCE3340, Racers Edge - 20,000cst 70ml 2.36oz Pure Silicone Diff Oil Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$9.49
Racers Edge RCE3300, Racers Edge - 2,000cst 70ml 2.36oz Pure Silicone Diff Oil
RCE3300, Racers Edge - 2,000cst 70ml 2.36oz Pure Silicone Diff Oil Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$8.99
Xpress XP-10923, Xpress Hard Strong Front And Rear Composite Suspension Arms V2
XP-10923, Xpress Hard Strong Front And Rear Composite Suspension Arms V2
$9.99
Xpress XP-10236, 4.8mm Ball 5mm Thread 4pcs
XP-10236, 4.8mm Ball 5mm Thread 4pcs
$6.36
Xpress XP-10239, 4.8mm Ball 10mm Thread 4pcs
XP-10239, 4.8mm Ball 10mm Thread 4pcs
$6.36
Team Associated ASC70009, Team Associated RC10SC6.4 1/10 Off Road Electric 2WD Short Course Truck Team Kit
ASC70009, Team Associated RC10SC6.4 1/10 Off Road Electric 2WD Short Course Truck Team Kit Team Associated RC10SC6.4 Electric 2WD SC Team Truck Kit Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit. Based on the legendary successful RC10SC6.2 Short Course truck with a long list of updated features and designs to bring maximum capabilities, performance and adjustability out of this super versatile competition truck to match and fulfill all racers' needs. The RC10SC6.4 shares key components with the RC10T6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time! With 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling, updated front ball stud mount and top plate with an angled steering system for improved steering consistency, updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability and updated longer 92.5mm CVA driveshafts that provides more rear grip! In addition, the included B6.4 (-1mm) kingpin offset steering and caster block set provides smoother and more predictable steering through the entire wheel throw, and the B6.4 adjustable height steering bellcrank and rack system provides optimized bump-steer at all ride heights and caster angles. With so many more features, tuning options and upgrades, we can all agree that the RC10SC6.4 is the ultimate kit option for all the competitive racers seeking high performance and quality! NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Updated Features: 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling 13mm machined shock pistons Updated front ballstud mount and top plate with an angled steering system for improved steering consistency Updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability Updated rear suspension with wider C and D mounts from the RC10B6.4 series Updated longer 92.5mm CVA driveshafts for more rear grip 7.0mm blue aluminum rear clamping hexes with laser etching Updated chassis side rails with the RC10B6.4 fan mount system Updated short course truck length aluminum chassis with 22.5 degrees kick-up to complement the updated front-end geometry with updated shape to reduce chassis scrub on the track surface (20, 22.5 and 25) degrees molded bulkheads are included for a complete range of caster and kick-up options B6.4 adjustable height steering bellcrank and rack system for optimized bump-steer at all ride heights and caster angles Includes B6.4 -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw Aluminum RC10B6.4 ESC mounting tray positioned forward in the chassis and a wider footprint to fit electronics, resulting in an increased forward weight bias Factory Team RC10B6.4 11g aluminum ESC tray Specifications: Scale: 1/10 Power Plant: Electric Length: Varies Width: Varies Height: Varies Wheelbase: 325mm (8.86in) Gear Ratio: 2.6:1 Drivetrain: 2WD Surface: Off-Road Completion level: Unassembled Includes: (1) Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit Needed to Complete: (1) Steering servo (1) 2-channel transmitter & receiver (1) 1:10 scale 540-size electric motor & ESC (1) 2S LiPo battery (1) Polycarbonate SC Truck body Paint for polycarbonate body Wheels & Tires Assembly Tools & Tires CA glue This product was added to our catalog on June 19, 2023
$399.99
Tamiya TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit
TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit This is the Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit. An upgraded version of the TT-02 Type-S kit Series that comes loaded with Tamiya Hop-up parts, 37mm drive shafts, aluminum propeller shaft and lightweight aluminum joint cups to reduce 7.8g of the weight, making this kit a capable performer out of the box and a great option to start racing! Note: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Included Tamiya Hop-Up options: 37mm Drive shafts for double Cardan joint shafts Carbon fiber damper stays XV-02/TT-02 oil gear differential unit XV-02/TT-02 (39T) front direct coupling set 06 Module (27T) hard-coated aluminum pinion gear TRF419 Suspension upgrade set Aluminum propeller shaft (68T) High speed gear set 5mm Thick clamp type blue aluminum wheel hex TRF damper oil seal Cross joints for low friction assembly universal shafts Short ball connector nuts for TRF dampers Blue 4mm aluminum serrated wheel nut Universal drive shafts to maintain a stable drivetrain regardless of suspension stroke Full ball bearings Independent double wishbone suspension Front direct spool ensures ease of assembly and stable drivability Specifications: Scale: 1/10 Chassis Type: TT-02 Suspension: Independent double wishbone Suitable Terrain: On-Road Drivetrain: 4WD Shaft Driven Includes: (1) Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit (1) Carrying case dedicated for the TT-02 Type-SRX chassis Needed to Complete: (1) 2-channel Transmitter/Radio (1) Steering Servo (1) 1/10 Electronic Speed Controller (1) 540 motor, (1) 7.2 - 7.4V battery Compatible charger 257mm Polycarbonate body Polycarbonate paint for body Tires This product was added to our catalog on July 31, 2023
$359.00$289.99
McAllister Racing MR315, McAllister Racing AAR "Cuda" VTA
MR315, McAllister Racing AAR "Cuda" VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. Note: This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023
$29.99
XRAY XRA324102, XRAY XB2 2021 Lightweight LCG Solid Axle Set
XRA324102, XRAY XB2 2021 Lightweight LCG Solid Axle Set This is an optional XRAY Lightweight LCG Solid Axle Set, intended for use with XB2 2021 Carpet and Dirt Edition 1/10 2WD Off-Road Buggy Kits. This slipper eliminator is ideal for stock class racing. Package includes top shaft, spur gear, locker hub and hardware. This product was added to our catalog on May 25, 2023
$59.99
KYOSHO KYO34432T1, Kyosho EP Fazer Mk2 FZ02L 2021 Toyota Tundra Wide Body ReadySet (Inferno) w/Syncro KT-231P+
KYO34432T1, Kyosho EP Fazer Mk2 FZ02L 2021 Toyota Tundra Wide Body ReadySet (Inferno) w/Syncro KT-231P+ The Kyosho EP Fazer Mk2 FZ02L 2021 Toyota Tundra Wide Body ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a higher level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: Shaft drive full-time 4WD touring chassis (FZ02L) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 452mm Width: 192mm Height: 135mm Wheelbase: 274mm Tread (F/R): F:174mm/R:174mm Tires (F/R): F:66×25mm/R:66x25mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on November 17, 2022
$249.99
MST MXS-130040, MST Ball Differential Grease
MST Ball Differential Grease. This is the diff grease used with the RMX 2.0 S ball diff.
$2.99
Traxxas 93044-4, Traxxas Factory Five '33 Hot Rod Coupe: 1/10 Scale AWD Electric Supercar. Ready-To-Race® with TQ 2.4GHz radio system and XL-5 ESC (fwd/rev).
93044-4, Traxxas Factory Five '33 Hot Rod Coupe: 1/10 Scale AWD Electric Supercar. Ready-To-Race® with TQ 2.4GHz radio system and XL-5 ESC (fwd/rev). This product was added to our catalog on September 11, 2021
$229.99
MST MXS-533906MGR, MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/A90RB Body (Metal Grey)
MXS-533906MGR, MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/A90RB Body (Metal Grey) This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Car. Building off of the success of the RMX 2.0 this updated version brings the next level of performance to the RMX name. With countless hours of research and development, MST has fine tuned the RMX platform for the ultimate drift experience. Designed to be easy to drive for beginners but still rewarding for the experienced drifter, MST has included an updated chassis. This improved chassis offers increased traction and control along with a plethora of adjustments to fine tune your driving experience. Whether you are an experienced drifter or just getting started, the RMX 2.5 RTR gives you the performance you are looking for with looks to match! This RMX 2.5 RTR includes the A90RB pre-painted body. NOTE: With MST's commitment to quality they test drive each vehicle to ensure proper operation. In some cases there may be slight marks on the tires and this is considered normal. Wheels shown in photos may not depict the wheels included with the vehicle. MST includes a random set of wheels. Features: Updated chassis adds improved rear traction and control Two servo install options – vertical or lateral Updated spur gear allows the gearbox to be converted from RMX to RRX configurations Adjustable high angle steering system with adjustable Ackermann changes 6 degree KPI steering upright, and -0.5 towing distance axle design Redesigned inside rod fulcrum mount at the front upper arm features a 10-step height adjustment and two side positions Updated HT "Short" rear lower arm The fulcrum at the rear suspension upper rod features a 5-step adjustment on both sides and the outer fulcrum is 4-step adjustable on both sides Two motor mounting options – High or Low center of gravity Oil filled high performance shocks Full ball bearings throughout Steel CVD axle transmission system Realistic caliper and disc shape brake set Battery mount accommodates both standard and "shorty" style battery packs Hobbywing XBL 2500Kv brushless motor Hobbywing XBL50 brushless ESC MST SC-0352 high speed steering servo MGX Steering Gyro Realistic drift wheel and tire package Specifications: Size: 1/10 Drift Car Wheelbase: 257mm Width: 190mm Hex to Hex Width: F178mm / R171mm Drive mode: RWD Caster: Adjustable 6 / 8 / 10 / 12 degree Bearing: Full ball bearing transmission system Damper: Hydraulic damper set Includes: RMX 2.5 RTR Drift Car XTR-03 2.4GHz Radio System XBL 2500Kv Brushless Motor XBL50 Brushless ESC MST SC-0352 Servo Steering Gyro Realistic Street Tires Needed To Complete: (1) 2S LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector (1) Compatible Battery Charger (4) "AA" Batteries (for transmitter) This product was added to our catalog on July 17, 2023
$399.99
Traxxas NEW - 67376-4, Traxxas Rustler 4X4 VXL with Extreme Heavy Duty Upgrades!
67376-4, Traxxas Rustler 4X4 VXL with Extreme Heavy Duty Upgrades! This product was added to our catalog on March 28, 2024
$399.99
CEN Racing CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR
CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR RGB LED Light: Standard Under Fender Multicolor RGB LED. ESC: 40A WP-1040-Brushed (By HobbyWing) Water-Proof and Dust-Proof for All Weather. Built-In Capacitor Module. Automatic Throttle Range Calibration. Low Voltage Cut-Off Protection for Li-Po and NiMH Battery. Over-Heat Protection and Throttle Signal Loss Protection. Motor: RS-540 High Torque Brushed Motor. Servo: 12Kg Metal Gear Servo (By Savox) 4.8V - 0.26 sec/60 10.0 kg-cm. 6.0V - 0.23 sec/60 12.0 kg-cm. 25T Horn Gear Spline. Radio System: Pistol-Grip Mod-3S 3 Channel Transmitter and Receiver Digital Trimming. Steering Dual-Rate (ST D/R) Adjustment. End Point Adjustment (EPA). Build in Failsafe. Frequencies: 2.4GHz Power Supply: 4 AA Alkaline (Not Included). Body: Official Licensed by Ford Motor F-250 Super Duty. Scale Realistic Body Details. Black Bed Liner Coating. hard Molded Front & Rear bumpers with build in 3mm LED housing Chassis: Steel Frame Rails. CMS (Chassis Mounted Servo) Chassis Design. Stamped Steel Shock Hoops. Steel Skid Plate. Full Precision Ball Bearing Supported. Adjustable Turnbuckles. High Torque Servo Saver Horn. Easy Access Battery Tray. Battery Tray Size 146 x 50 x 25mm. Suspension: Custom Lifted Suspension Design. 110mm Big Bore Oil Filled Adjustable Coil Over Shocks. 12mm over size shock body with 3mm Hardened Steel Polished Shaft. Harden Steel Steering Drag Link. CNC Machined 6mm Aluminum Linkage. Front / Rear Sway Bar. Drivetrain: Full Metal Transmission Gears. 4 Wheels Drive. Center Shaft Drivetrain for More Power Transferred to the Wheels. Hight Efficient Transmission System. Wide Range Easy Changeable Gear Box Design. Sealed Transmission Case. Sealed Axle Housing. Metal Planetary Gear Type Differential. Gear Ratio: Hi / Speed Ratio 1.56:1 Hi / Torque Ratio 2.8:1 Spur / Pinion Gear 32p85/32p12T Ring & Pinion Gear30/15T 2:1 Wheel: Official Licensed by KG1 Forged KF004 Vile Wheel. 66.50mm x 37.5mm. Tires: Official Licensed Fury Tires Low Profile Country Hunter tires. 65 x 100.50 x 38.50 mm. Specifications: Length: 25.6 inches (650mm) Width: 10.04 inches (255mm) Wheelbase: 16.02 inches (407mm) Ground Clearance: 3.54inch (90mm) Weight: 5.51 lb. 2.5 kg Recommended Battery: 2S 5000mAh LiPo Battery with dean connector
$469.99
Xpress XP-10168, SOFT SPRING PAIR BLACK
XP-10168, SOFT SPRING PAIR BLACK Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S Material: Steel Color: Black Include: Spring (2 pcs) This product was added to our catalog on October 22 , 2023
$4.99
Racers Edge RCE3335, Racers Edge - 15,000cst 70ml 2.36oz Pure Silicone Diff Oil
RCE3335, Racers Edge - 15,000cst 70ml 2.36oz Pure Silicone Diff Oil Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$9.49
Xpress XP-10011, Gear Differential Repair Parts
XP-10011, Gear Differential Repair Parts
$4.99
Xpress XP-10334, Xpress 39mm Spring Steel Double Joint Universal Shaft 2pcs
XP-10334, Xpress 39mm Spring Steel Double Joint Universal Shaft 2pcs
$53.99
KYOSHO KYOFATH702BKM, Kyosho Fazer Pre-Mounted Sedan Tires w/15 Spoke Wheels (2) (Black) (12mm Hex)
KYOFATH702BKM, Kyosho Fazer Pre-Mounted Sedan Tires w/15 Spoke Wheels (2) (Black) (12mm Hex) This is an optional set of two Kyosho Fazer Black Pre-Mounted Sedan Tires with 15 Spoke Wheels, intended for use with Fazer Mk2 kits. This product was added to our catalog on August 15, 2022
$24.99
KYOSHO KYOFAT701M, Kyosho Fazer Mk2 TC Tire (2) (M)
KYOFAT701M, Kyosho Fazer Mk2 TC Tire (2) (M) Kyosho Fazer Mk2 TC Tire in M compound. Package includes two replacement tires intended for the Kyosho Fazer Mk2. This product was added to our catalog on March 23, 2021
$15.99
KYOSHO KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit
KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit This is the Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit. Built on the foundation of the competition-level Ultima RB5, the Dirt Master features high-quality performance components at a mid-range price. Its rear motor layout provides unbeatable grip and stability over low-traction surfaces like gravel and riverbeds. The nostalgic flair of the Dirt Master's updated body pays homage to the classic buggy design while incorporating modern performance features. And with its racing heritage, this buggy is equally at home on fully-fledged RC racing circuits as it is in the great outdoors.Whether you're a beginner driver looking to step up your off-road game or a seasoned racer seeking some good old-fashioned bashing fun, the Ultima SB Dirt Master is the perfect choice. Get ready to experience the purest form of off-road excitement with the Ultima SB Dirt Master. NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Based on a competition-level racing buggy, this unassembled EP buggy kit delivers high performance at a low price. Rear motor design delivers excellent rear tire grip and superior control. Included front/rear tires and wheels demonstrate stability over various types of road surfaces. Classic style body with ageless smart design is equipped with a rear wing that enhances driving stability. Resin main chassis is easy to assemble and exhibits moderate flex characteristics, and can be equipped with standard RC components. Race-proven double-wishbone front and rear suspension is equipped with precision resin oil shocks. Steering mechanism is equipped with a servo saver function that protects the servo from crash shocks. Full bearing specifications as standard greatly improves drive system efficiency. Compatible with optional parts for the Ultima series and racing springs. Driver Set from 2014 Beetle (KYOSCB003B) can be installed to enhance scale realism. Specifications: Length: 380mm Width: 249mm Height: 140mm Weight: 1,450g Wheelbase: 270mm Tire Size: Front:84×28mm Rear:86.5×42mm Gear Ratio: 8.23:1 Includes: (1) Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit (1) Polycarbonate clear body (1) Wing (1) Window mask set Decals Chassis parts Cross wrench Hex wrench?1.5mm/2.0mm? Grease Tires with Tire Inners Wheels Pinion Gear Needed to Complete: (1) 2 Channel R/C System (1) Servo (1) Compatible ESC (1) 540 Size Motor (1) 7.2V Ni-MH Battery or (1) 7.4V Li-Po Battery (1) Compatible Charger Polycarbonate body paint Silicone oil for Shocks Assembly Tools This product was added to our catalog on May 2, 2023
$199.99
XRAY XRA322311, XRAY XB2 Composite Front Lower Arm Mount
XRA322311, XRAY XB2 Composite Front Lower Arm Mount XRAY XB2 Composite Front Lower Arm Mount. This is the replacement front lower arm mount for the XB2 1/10 buggy. This product was added to our catalog on May 25, 2023
$10.99
PROTOform PRM152600, Protoform J71 Vintage Racing Body (Clear)
PRM152600, Protoform J71 Vintage Racing Body (Clear) This is the Protoform J71 Clear Body, intended for use in the VTA class. The addition of the J71 to the VTA scene will add new excitement to an already diverse class of racing, and is guaranteed to shake things up! The J71 features all the unique styling cues of the original car, as well as a molded in rear spoiler. The front of the car features an add-on nose with air dam, and when mounted with shoo goo and 2mm screws it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is supplied with the body. This provides the user with a lightweight, durable .030 lexan body, which in turn aids the handling ability of any VTA chassis. The VTA class has proven that its here to stay, and the Protoform J71 will definitely make things more interesting. Features: Made from extremely durable .030 Lexan® material 200mm wide at the front and 210mm across the rear wheel openings Add-on front nose with air dam Paint then peel over spray film, sticker sheet, and window masks included Exceptional detail for the Vintage style we all enjoy Specifications: Length: 16.9" (429mm) Front Width: 7.9" (200mm) Rear Width: 8.3" (210mm) Height: 3.9" (110mm) Wheel Base: 10.2" (260mm) Includes: (1) Clear J71 body (2) Front Body Nose Piece (1) Mounting Hardware (1) Window Masks (1) Decal Sheet This product was added to our catalog on May 3, 2023
$34.99
Carisma CIS86568, Carisma SCA-1E 2.1 Spec Toyota Tacoma TRD Pro 1/10th RTR
CIS86568, Carisma SCA-1E 2.1 Spec Toyota Tacoma TRD Pro 1/10th RTR Carisma's most successful rig ever has evolved, and they've kept the affordable price point, making it one of the best value rigs on the market. Officially Licensed TOYOTA TACOMA TRD Pro Body With Hard Body realism, and the weight advantage of polycarbonate, this is no ordinary shell! It's a multi-part body with added injection molded scale detail. LED lights are pre-fitted at the factory, and will allow users to illuminate their way on rocks or trails (or even urban environments).The rig also comes with unique TRD Pro, True Beadlock Wheels, ensuring that the 95mm Ultra Realistic ATSS tires stay firmly on the rims. Upgrades & Enhancements The Gen 2 layout, with CMS Mount and forward mounted battery, offers a forward weight bias to aid crawling, making it ready for action! The issue of torque twist, something inherent in all shaft driven rigs, has been addressed with the ATT (Anti Torque Twist Transmission) which counteracts and reduces the effects of torque twist by rotating the front and rear center drivelines in opposite directions. This creates a counter rotational force in the central driveline that significantly reduces twist and enhances traction when you need it most. The rig runs flatter even at full throttle, and the geometry is more stable and predictable when rock crawling Increased Control & Torque This rig comes with the fully programmable ARC-2 Electronic Speed Controller as standard. Fine-tune any one of 21 Programmable Performance Parameters (including PWM Frequency) with the included, (and easy to use) MPG-1 programmer. Truly class leading electronics at an affordable price. Alongside the LiPo friendly ARC-2 Electronic Speed Controller, the gear ratio has been lowered to 5.92:1, giving a smoother low RPM range and greater control. The CSA 5-Pole Motor generates immense torque and low RPM throttle finesse, which is essential for exploration, trail running and rock crawling. When matched with the ARC-2 ESC, this offers a formidable combination of control and power. Tried & Trusted Electronics Carisma's CTX-2000 2.4GHz radio system is supplied with the RTR rig. Featuring Steering Rate adjustment, Steering and Throttle Trims, Channel Reversing, End Point Adjustment and F.H.S.S (Frequency Hopping Spread Spectrum) Technology for glitch free use, eliminating cross channel interference and offering precise and responsive control at all times. With a unique 1-2-3 Throttle Profile Switch, it allows users of all abilities to have complete control of the rig. From seasoned OG RC enthusiasts, to complete RC newbie, Carisma has you covered. Also included is a 1400mah NiMH battery and safe 5V USB Charger to get you started on your adventure, although the ARC-2 ESC is also LiPO friendly, offering you a clear future upgrade path. Dimensions: Wheelbase: 313mm Length: 510mm Width: 210mm Clearance: 75mm Features: Officially Licensed TOYOTA TACOMA TRD Pro Body LED Lights are pre-fitted at the factory 5-Pole Motor generates immense Torque and low RPM Throttle Finesse 9kg High Torque Metal Geared Servo ATT (Anti Torque Twist) Transmission Low 14,83 (5.92:1) Gear Ratio This product was added to our catalog on September 10, 2022
$399.99
MST MXS-820132, MST TCR 11mm Coil Spring Set (12)
MST TCR 11mm Coil Spring Set. This optional spring set is intended for the MST TCR chassis. Using this set will allow you to fine tune the suspension to best suite your track and driving style. Package includes twelve springs.
$18.99
HPI Racing HPI120094, HPI Sport 3 Drift VGJR "Fun Haver" Ford Mustang 1/10 RTR 4WD Drift Car (V2) w/2.4GHz Radio, 7.2V Battery & Charger
HPI120094, HPI Sport 3 Drift VGJR "Fun Haver" Ford Mustang 1/10 RTR 4WD Drift Car (V2) w/2.4GHz Radio, 7.2V Battery & Charger HPI Sport 3 Vaughn Gittin Jr Ford Mustang 1/10 RTR Drift Car The HPI Sport 3 Drift Vaughn Gittin Jr's "Fun Haver" Ford Mustang 1/10 RTR Touring Car has been designed to give the Formula Drift looks and feel. This high performance Sport 3 chassis comes with officially licensed Nitto NT555 G2 tires on Tech 7 wheels. The 1/10 drift chassis is equipped with high octane HPI Firebolt 15T Brushed Motor paired with a brushed ESC. The fully-independent double wishbone suspension uses adjustable, oil-filled shocks to keep the Sport 3 ready for any road condition. The officially licensed, super realistic Ford Mustang RTR replica features a wild color scheme emblazoned with Vaughn's signature Fun-Haver logos and his "Ready to Rock" motto. The Fun-Haver V2 is packed with tough features to make it super-easy to drive for hours of sideways fun! Features: One-Piece Molded Chassis Low Profile Layout Design Brushless Capable Drivetrain Full-Time 4WD Sealed Center Driveshaft Easy Access Differentials 4-Gear Metal Differentials Adjustable Double-Wishbone Suspension Threaded Oil-Filled Shocks Double Bellcrank Steering Aluminum Motor Mount Specifications: Scale: 1/10 Length: 431mm (17") Width: 200mm (7.9") Height: 127mm (5") Wheelbase: 254mm (10") Includes: (1) HPI Sport 3 Vaughn Gittin Jr Ford Mustang 1/10 RTR Drift Car (1) 7.2V 2000mAh NiMH Battery (1) Wall Charger (4) AA Batteries for Transmitter Needed to Complete: Nothing! Everything you need is in the box! This product was added to our catalog on April 21, 2023
$299.99
Yokomo YOKRP-032A, Yokomo 40x40x10mm Racing Performer Cooling Fan
YOKRP-032A, Yokomo 40x40x10mm Racing Performer Cooling Fan This is the Yokomo Performer Racing Cooling Fan. Coming in at a square 40mm × 40mm, with a 10mm thickness, this fan can push a large volume of air to force cool your motor or ESC. With the included 15cm extension cord, mount this fan in the chassis and plug it into a BEC unit for operation. This product was added to our catalog on January 10, 2023
$13.25
Xpress XP-90035, Xpress Arrow AT1S 1/10 4WD Shaft Drive Sport Touring Car
XP-90035, Xpress Arrow AT1S 1/10 4WD Shaft Drive Sport Touring Car The Arrow series takes the best from the Execute series of touring cars and incorporates it in a shaft driven system. Sporting floating gearboxes to include more chassis flex. Specially designed motor mount makes adjusting gear mesh a breeze. Also bringing various modern designs that brings this car fit for racing straight from the box, Sport version of the car whilst compromising in some material choices bringing the price down to a entry level whilst leaving you the option to upgrade where you see fit!Feature: Internal Gear Ratio: 2.353 4WD Shaft Drive Floating Gear Box System Sealed Transmission Gear Box Front Spool & Rear Gear Differential Unit Front & Rear Composite Propeller Shaft Roll Bar Upgradeable Low Profile Long Travel Short Shocks Durable Composite Drive Gears 2.25mm Fibre Main Chassis 2.0mm Fibre Top Deck Full Turnbuckle Linkages Full Ball Bearing Set Vertical & Horizontal Rear Body Post Included Slotted motor mount for easy to adjust gear mesh Specification: Type: 1:10 On-road 4WD Length: 380mm Wheelbase: 258mm (Adjustable) Track Width: F186mm / R184mm (Approx.) Include: Arrow AT1S Sport Touring Car Kit (1 pc) Required: Radio system (transmitter and receiver) Steering servo Motor Pinion gear (64p) Battery pack Speed controller Charger Bodyshell Wheels, Tires, Inserts
$169.99
Xpress XP-10941, 4MM ALUMINUM SHAFT DRIVEN GEAR DIFFERENTIAL OUTDRIVE ADAPTOR
XP-10192, Adjustable LiPo stoppers for easily securing LiPos of different lengths. This product was added to our catalog on December 30, 2023
$21.99
McAllister Racing MR273, McAllister Racing #273 ASA Style Camaro Late Model Body
MR273, McAllister Racing #273 ASA Style Camaro Late Model Body This is a body only. This product was added to our catalog on December 28, 2023
$29.99
Xpress XP-10819, BODY SUPPORT BRACE
XP-10819, BODY SUPPORT BRACE Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S, DR1S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400 or Hard Strong Composite V2 C Hub 4 Degree #XP-10810 Feature: For: Xpress Execute XQ2S DR1S For: Xpress Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S with extra parts Material: Composite Color: Black Include: Support Braces (2 pcs) Support Mount (2 pcs) Screws (2 pcs) This product was added to our catalog on November 21, 2023
$10.00
KYOSHO KYOFAW217, Kyosho Fazer FZ02 HD Motor Mount
KYOFAW217, Kyosho Fazer FZ02 HD Motor Mount Kyosho Fazer FZ02 HD Motor Mount. This optional CNC machined motor mount is intended for the Kyosho Fazer MK2 platforms. This will help dissipate motor heat and more securely hole the motor in place. Package includes one aluminum motor mount and one aluminum motor dust plate. This product was added to our catalog on November 14,2023
$19.99
Team Associated ASC91998, Team Associated RC10B6 Pre-Cut 1/10 Buggy Wing (7" Wide)
ASC91998, Team Associated RC10B6 Pre-Cut 1/10 Buggy Wing (7" Wide) The Team Associated RC10B6 Pre-Cut 1/10 7" Wide Buggy Wing offers even more downforce compared to the current 6.5" wing for the B6. With the larger size more downforce and high speed stability is created giving the vehicle faster speeds on sweeping corners and lower grip tracks. Package includes one clear pre-cut 7" wing. This product was added to our catalog on October 26, 2023
$13.99
Xpress XP-10947, ALUMINUM 20T CENTER LAYSHAFT PULLEY
XP-10947, ALUMINUM 20T CENTER LAYSHAFT PULLEY Feature: For: Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S Material: Aluminum Color: Red/Black Include: Aluminum Pulley (1 pc) This product was added to our catalog on October 20, 2023
$11.99
McAllister Racing MR298, McAllister Racing #298UL 1/10 Xfinity Camaro Ultra Light Body
MR298, McAllister Racing #298UL 1/10 Xfinity Camaro Ultra Light Body This is a 1/10 Scale Xfinity Camaro Ultra Light Body. Features: Compatible with 1/10 scale pan cars and touring cars. Clear, unpainted body. Made from 0.020 Ultra Light thickness genuine Lexan. Made in the USA. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. This product was added to our catalog on October 9, 2023
$29.99
Racers Edge RCE3305, Racers Edge - 3000cst 70ml 2.36oz Pure Silicone Diff Oil
RCE3305, Racers Edge - 3000cst 70ml 2.36oz Pure Silicone Diff Oil Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$8.99
Racers Edge RCE3225, Racers Edge 25 Weight 275cst 70ml 2.36oz Pure Silicone Shock Oil
RCE3225, Racers Edge - 25 Weight 275cst 70ml 2.36oz Pure Silicone Shock Oil Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$8.99
Racers Edge Racers Edge RCE3365 - 200,000cSt 70ml 2.36oz Pure Silicone Diff Fluid
Racers Edge RCE3365 - 200,000cSt 70ml 2.36oz Pure Silicone Diff Fluid Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$12.99
Racers Edge RCE3360, Racers Edge - 100,000cSt 70ml 2.36oz Pure Silicone Diff Fluid
RCE3360, Racers Edge 100,000cSt 70ml 2.36oz Pure Silicone Diff Fluid Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$12.99
You have seen 96 out of 329 products