The Nazgul5 HD V3 is loaded with lots of power and performance; it comes with the XING-E Pro 2207 6S motors, BLITZ F722 FC, and BLITZ E45S 45A 4-in-1 ESC, which makes this quad a must-have! Now with the DJI O3 Air Unit! The Nazgul V3 is one of the best freestyle frames for its value.  The Nazgul5 V3 HD has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly. The Nazgul5 V3 is a 5" freestyle frame made of super stiff carbon for minimal resonance. Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Features XING-E Pro 2207 motors and NAZGUL F5 props 5" version also fits 5.1" style propellers Fits both 30.5x30.5 and 20x20 stacks 5mm arm design for more durability Popular True-X configuration LED illuminated logo TPU crash-guards Easy-Swap arms Specifications Operating Temperature Range：-10° to 40° C (14° to 104° F) Max Wind Speed Resistance: 130 Km/H (Level 4) Receiver: DJI BNF, ELRS Dimensions (L×W×H): 180×180×80 mm Max Speed: 130 Km/h (Manual Mode) Video Transmission: DJI O3 Air Unit Maximum Takeoff Altitude: 5000 m Product Name：Nazgul5 V3 6S HD ESC: BLITZ E45S 45A 4-IN-1 ESC Max Hover Time: Approx. 8 mins Motor: XING-E Pro 2207 motors Takeoff Weight: Approx. 620 g Prop: Nazgul 5 inch propellers Diagonal Distance: 245mm Frame: 255mm wheelbase Max Flight Distance: 5 km Antennas: 2 Antenna FC: BLITZ F722 GNSS: N/A Video Transmission  Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Dimensions (L×W×H): L32.5x W30.5xH 14.5mm Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V Audio Transmission: N/A Includes 1x iFlight BNF Nazgul5 V3 HD  6S 5" Freestyle Quad w/ DJI O3 Air Unit & Micro Cam - Choose Receiver 2x Nazgul 5 inch propellers (Set of 4) 2x Battery Pad 2x Antenna

Read more less

All batteries must be shipped by a ground shipping method. Introducing iFlight's Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn't require registration in most countries. The compact and lightweight design also make it easy to carry and store. It will be your best travel buddy to redefine your FPV adventure. The built-in 2.5-inch propeller guards were designed to fly boldly. You’ll experience a completely new creative freedom to fly whenever and wherever. The durable injection molded frame not only prevents damage to your motors or propellers but also protects the environment from small flight errors. Equipped with the latest tech from DJI, the O3 Air Unit HD transmission system, the Defender 25 supports 4K video and shoots up to 155° super-wide FOV footage for stunning visuals. In addition, D-Cinelike color mode provides more creative freedom for color grading, allowing you to edit and adjust your footage.  They’ve also added a special vibration-damped camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the built-in or in-post camera stabilization. Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Features Optimized Landing Gear for Take-Off in Complex Environments Built-in High-Performance video and Receiver Antennas 4K Stabilized Video with 155° Ultra-Wide Angle Crash-Protected Quick-Release Battery Countless Easy-to-Use Features Ultralight and Free to Fly Small and Mighty Specifications Defender 25 Product Name: Defender 25 4S HD Flight Electronics: BLITZ D25 F7 AIO Video Transmission: DJI O3 Air Unit Frame: 112±2mm Motor: Defender25 1404 Prop: Defender25 2525 props (2.5-inch) Weight of the Aircraft: 180g Takeoff Weight incl. 550mAh battery: ≤249g Dimensions (L×W×H)：158x155x69mm Max Ascent Speed: 6 m/s (Normal Mode, Sport Mode) Max Descent Speed: 6 m/s (Normal Mode, Sport Mode) Max Speed: 100Km/H (Manual Mode) Maximum Takeoff Altitude: 200 m Max Hover Time: Approx. 6 mins (with 550mAh battery), 10mins (with 900mAh battery) Max Flight Distance: 2-3 km Max Wind Speed Resistance: 80 Km/H (Level 5) Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Dual Antennas GNSS: N/A Video Transmission Product Name: DJI O3 Air Unit Weight: Approx. 36.4grams Dimensions (L×W×H): L16.7×W103.9×H 81.3mm Screen Size (single screen): 0.49-inch Resolution (single screen): 1920×1080 Refresh Rate: Up to 100 Hz Interpupillary Distance Range: 56-72 mm Diopter Adjustment Range: -8.0 D to +2.0 D FOV (single screen): 51° Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz Transmission Power (EIRP): 2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC) 5.8 GHz [4]: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC) Max Video Transmission Bitrate: 50 Mbps Operating Temperature Range: 0° to 40° C (32° to 104° F) Power Input: 7-9 V (1.5 A) Recommended (Not Included) iFlight Defender 25 Battery - 900mAh Includes 1x iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJI Camera (Pre-Built, Tuned, and Tested) 1x Defender 25 550mAh Battery 1x Charging Adapter Board 2x Defender 25 2525 Props (pairs)

Read more less

The iFlight Nazgul5 V3 6S 5" Freestyle Analog Quad is here! It includes the RaceCam R1 FPV Camera and Nazgul 5" tri-blade props, XING-E Pro 2207 motors, BLITZ F7 Flight Controller, BLITZ 1000mW+ VTX, and the BLITZ E45S 2-6S 45A BLHeli32 4-in-1 ESC. Boasting CNC aluminum camera mount with vibration-reduction silicone for increased protection. Great for freestyling and long-distance shots with your GoPro camera! The Nazgul5 Freestyle quad is a go-to gold standard for freestyle BNFs of great value made by the great people at iFlight.  The Nazgul5 V3 is a 5" freestyle frame is made of super stiff carbon for minimal resonance. + High-quality parts+ Sturdy frame structure+ Generous mounting space+ Optimized for O3 Air Unit+ GoPro camera mount included  Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Features XING-E Pro 2207 motors and NAZGUL F5 props 5" version also fits 5.1" style propellers Fits both 30.5x30.5 and 20x20 stacks 5mm arm design for more durability Popular True-X configuration LED illuminated logo TPU crash-guards Easy-Swap arms Specifications Product Name：Nazgul5 V3 6S Analog FC: BLITZ F722 FC ESC: BLITZ E45S 45A 4-IN-1 ESC Video Transmission: BLITZ 1mW+ VTX Frame: 245 ±2 mm wheelbase Motor: XING-E Pro 2207 motors Prop: Nazgul 5 inch propellers Takeoff Weight: Approx. 435g / 660±10g (With 6S 1400mAh Battery) Dimensions (L×W×H): 173×173×34±2 mm Diagonal Distance: 245mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 7.5 mins (No Load with 6S 1400mAh Battery) Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: Single Antenna Video Transmission System Product Name: BLITZ Whoop 1mW+ VTX Input voltage: 7V～34V Interface: MMCX Power levels: PIT/25mW/400mW/800mW/1600mW Channels: 40 (including Raceband) Mounting pattern: 30.5x30.5mm/Φ3 Lightweight: 18.9g (excluding antenna) VTX telemetry: IRC Tramp Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight! RC Tramp VTX table values: 25mW/400mW/800mW/1600mW Includes 1x Nazgul5 V3 6S Analog BNF 1x Antennas 2x Battery pads 2x Nazgul F5 Prop(Pairs)

Read more less

Introducing the BOB57, a 6" cinematic long-range quad pre-installed with the all-powerful DJI O3 system for crystal clear image quality. This quad aims to best of 5" and 7", hence the name BOB57. This quad is DJI PNP, meaning it does not come with a receiver, meaning you need to install your receiver.  However, if you have the DJI FPV Remote Controller 2, you can bind to the O3 Air Unit. This quad also comes with a GPS pre-installed, allowing all the marvelous features a GPS allows you. The BOB57 comes with XING2 2506 motors with a rated KV 1500, designed around 6S power.  The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot & videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights. Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products  Features Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers. High-end GPS is used to minimize the risk of failure during proximity flights Long backbone with enough space up to fit 3000mAh 6S batteries Solid antenna mount for less oscillations when using long antennas Gladiator shell protects from dust and water droplets ESCs with built-in spike absorbers for more reliability Built-in BEC to directly power a GoPro camera 9-minute flight time with 3000mAh 6S Lipo Front-mounting XT-60 DJI O3 Air Unit VERSATILE BODY The Body is designed to carry small to large batteries for agile or long-range missions. SMART XT60 AND USB-C PLUG The XT60 plug is located in the front to gain more space. With the USB-C plug you can directly power your GoPro/Action Cams. OPTIMIZED MOTOR AND PROPS The Motor is designed for 6inch to give both great performance and efficiency. The prop is specifically optimized for this drone. RELIABILITY The BOB57 comes with a shell that protects against hits, droplets, and dust. It also has a high-quality GPS and components for more reliability, like a spike absorber & extra capacitor. PRE-TUNED AND PRE-SETUP Don't worry about tuning, iFlight did that for you already! A basic PID and Filter tuning were applied for a great flight experience! Links Ellis van Jason Tune Setup Specifications Product Name: BOB57 O3 6S HD BNF FC: BLITZ F722 ESC: BLITZ E55 55A 4-IN-1 ESC Video Transmission: DJI O3 Air Unit Frame: 280mm wheelbase Motor: XING2 2506 motors Prop: GEMFAN 6032-3 propellers Takeoff Weight: Approx. 580 g Dimensions (L×W×H)：226×166×34 mm Max Speed: 180 Km/h (Manual Mode) Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 8 mins (With 6S 1400 no load.) Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: 2 Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass Video Transmission  Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Dimensions (L×W×H): L32.5x W30.5xH 14.5mm Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V Audio Transmission: N/A  Includes 1x BOB57 6S HD BNF 2x Antennas 2x Battery pads 2x Prop(Pairs)

Read more less

After our very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.  Our all-new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here.  ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all-new 2205 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS-measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch-outs or light freestyle moves.  A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization). Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Note: Battery, GoPro, and GoPro mount are NOT included. Check out our other pre-built quads, as well as the rest of our iFlight selection! Features High-performance True-AIO Board Beast Whoop F7 AIO 55A v2.0 to save weight and space T700 Quality Carbon (40% more tensile strength compared to common 3K carbon) Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable) Low Resonance frame construction (Less Jello, more Cinematic footage) Pre-tuned with smooth freestyle settings Butter smooth 2205 3200KV (4S) ProTek35 Prop Guards V2.0 No Props or frame in view! Pre-Tuned & Pre-Setup: Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning were applied for a great flight experience! To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps" Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on "How to disable Angle-Mode, and activate Acro-Mode" Specifications Beast F7 V2 AIO FC MCU: BGA-STM32F745 Gyro: BMI270 Blackbox: 8Mb Onboard Flash BEC output: 5V 2.5A Barometer: BMP280 Connector: Micro-USB OSD: AT7456E FC Firmware：IFLIGHT_F745_AIO_V2 Mounting pattern: 25.5x25.5mm φ3mm Dimensions: 32.5x32.5mm Weight: 8.5g F7 55A 2-6S ESC Current Sensor: Yes Input: 2-6S LIPO Current scale: 200 Constant: 55A  BLHeli: BLHeli-S Telemetry: no ESC Firmware: BlheliS G-H-30 Mounting pattern: 25.5x25.5mm/Φ3mm Dimensions: 32.5x32.5mm SucceX Mini Force 5.8GHz 600mW VTX Power: PIT/25/200/400mW/600mW Antenna interface: MMCX VTX protocol: IRC Tramp Output 40 channels. Size: 29x29mm Mounting pattern: 20x20Φ3/25x25 mmΦ2 Weight: 4g   Includes 1x ProTek35 Frame 2x Albatross RHCP RP-SMA 5.8g antenna 1x TPU Antenna holder 2x Nazgul 3535 propeller (Set of 4 - Color May Vary) 1x iFlight Lipo Strap 15x150mm (Color May Vary) 1x iFlight Lipo Strap 15x250mm (Color May Vary) 1x GoPro TPU bottom stand black (GoPro Protector not included)

Read more less