All product containing lithium batteries must be shipped by a ground shipping method.Following the groundbreaking performance of the predecessor, comes the newly re-invented Tinyhawk II Freestyle, the perfect beginner outdoor FPV quad! Check out all our pre-built quads, and our selection of EMAX gear! Features Durable aerospace grade 3k woven carbon fiber BlHeli_S ESC F4 (MATEKF411RX Firmware) Flight Controller RunCam Nano 2 FPV camera More powerful VTX with 25/100/200mw power levels Smart Audio connected FRSKY D8 compatible Efficient Emax 1103 7000Kv brushless motors Avan Rush 2.5" props   Specifications Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 Duo FPV System Ham radio license required for use in North America. VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)* Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II Freestyle BNF 2x EMAX 450mAh 1S HV Battery 1x 1S USB LiPo Charger 1x Hardware Kit

Read more less

NewBeeDrone's latest whoop, the AcroBee BLV4 is perfect for flying indoors and outdoors. The technology and level of detail built into this whoop are astounding! With new "Smart Max" technology, uses the MCU to read the board temperature on the back of the VTX chips and uses PID control to control the output power for the VTX amplifier. If the temperature is low enough, the PID will adjust the output power higher, a maximum of 400Mw, and if the temperature rises, the output power of the VTX is lowered to avoid overheating.  With the VTX power, combined with ELRS, this whoop will fly far. Check out our other pre-built quads, as well as the rest of our NewBeeDrone selection. Features Classic Design with a newly refreshed appearance New Flow 0802 19000Kv Motors On-board temperature regulation prevents damage to boards. Built-in ELRS receiver Specifications Flight Controller: BeeBrain BLv4 ELRS MCU: STM32F411 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX (SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna ESC: 12A BLHeliS Pre-Flash with Bluejay 0.16 target: S-H-40 48kHz ESC Connector: JST-1.0 3Pin OSD: NBD7456 Graphical OSD compatible with Betaflight OSD Receiver: ELRS2.4 Diversity receiver (ESP32 compatible with wifi&bluetooth firmware update) 2.4G T-Antenna (Top) & normal 2.4G antenna (bottom) Flight Controller Weight: 6.5g (Include antennas and battery connector) Flight Controller Size: Outer dimensions: 29x29x7.6mm Flight Controller Holes: 25.5x25.5mm Battery input: 1-2S Uart2: Tx & Rx for ExpressLRS2.4G Receiver Uart1: Tx & Rx free Power Connector: NBD-PH2.0 connector Motors: Flow 0802 19000kv Frame: Cockroach65 Brushless Frame Clear Purple Camera Mount: Goober Canopy Clear Purple Propeller: Azi Tri-blade 31mm 1.0 Clear Purple Firmware: 1. BeeBrain blv4 ELRS3.0 receiver firmware 2. BeeBrain blv4 ELRS2.0 receiver firmware All firmware can be found on their Github Page Includes 1x NewBeeDrone BNF AcroBee65 BLV4 Brushless Whoop - ELRS 2.4GHz  

Read more less

All products containing lithium batteries must be shipped by a ground shipping method. The TinyHawk II Freestyle RTF kit has literally everything you need to get started in the world of freestyle FPV! Quad, Goggles, Transmitter, Batteries, Charger and an awesome case to carry all of it. This kit is the best way to start from nothing and work your way up to learning more advanced freestyle tricks. It's also a great option if you're looking for a compact setup you can keep with you to rip a few quick packs wherever and whenever! Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver Battery Connector: JST-PH2.0 Duo FPV System VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)* Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk 2 Freestyle Drone 1x E6 Transmitter 1x Transporter Goggles w/ Battery + Antennas 2x EMAX 450mAh 1S HV Battery 1x 1S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Carbon Fiber Carrying Case *Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Tinyhawk II Freestyle is set to stay at 25mW until you arm the mot  

Read more less