97074-1, TRX-4M Scale and Trail Crawler with Ford Bronco Body: 1/18-Scale 4WD Electric Truck with TQ 2.4GHz Radio System The Traxxas TRX-4M 1/18 Electric Rock Crawler with Ford Bronco Body is an adventure-driven micro crawler that can be found at your local hobby shop! The highly detailed ABS bodyshell features clipless mounting to the rigid C-channel frame. This frame is supported by four oil-filled GTM shocks to add control and keep the body from bouncing around. Scale straight axles are connected to the frame using full 4-link suspension. Adding to the performance, this truck features up to 45° steering angle to help tackle the trail ahead. Head over to your local hobby shop and inquire about the Traxxas TRX-4M Rock Crawler! While your local hobby shop will have the truck, here at AMain we have a wide array of option parts available to make your TRX-4M a fully capable crawling machine! Check out awesome screw kits, scale wheels and tires, and much more from some of your favorite brands in RC! Features: Highly detailed licensed body shell made of durable ABS Triangulated 4-link front and rear suspension Oil-filled GTM shocks Wheels and tires mounted to 7mm hex Full-time shaft-driven 4-wheel drive Low-CG Battery Tray Superior 45° steering angle Direct steering (no servo saver) Powerful Titan® 87-turn brushed motor ECM-2.5 Electronic Control Module incorporates ESC, receiver, and LED controller Fully waterproof for all-weather fun Includes transmitter, battery and charger for out of the box fun Specifications Scale: 1/18 Length: 10.3 inches (262mm) Wheelbase: 6.10 inches (155mm) Track Width: 4.9 inches (124mm) Height: 4.6 inches (117mm) Ground Clearance: 1.12 inches (29mm) Weight (w/o battery): 1.03lbs (468g) Approach Angle: 54° Breakover Angle: 45° Departure Angle: 48° Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Wheels: 1.0 x 0.49 inches (25.4 x 12.5mm) Tires: 2.2 x 1.0 inches (57 x 25.4mm) Motor: Brushed 180-Size 87T Differential Type: Fully Locked; 2:1 Axle Ratio Battery Tray: 50.5x31mm (LxW) Includes: (1) Traxxas TRX-4M Micro Rock Crawler with: (1) Officially Licensed ABS Hard Body (1) Titan 180 87-turn motor (1) ECM-2.5 Electronic Control Module (1) TQ transmitter (1) 7.4 volt 750mAh 2-cell LiPo battery (1) 2-amp USB fast charger with iD Tools for maintenance Needed to Complete: (4) AA Alkaline Batteries This product was added to our catalog on January 19, 2023

Read more less

77086-4, Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck w/2.4GHz TQi Radio & TSM The Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck brings the same unrelenting 4X4 power, mammoth size and award-winning innovation to the game that make X-Maxx the ultimate monster truck. When you add 30+ volts of extreme 8s power, X-Maxx 8S defies physics, unleashing jaw-dropping acceleration and 50+mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough™. Traxxas engineers tossed conventional thinking out the window to bring loyal X-Maxx owners the most powerful Traxxas Monster ever developed. X-Maxx 8s is packed with 8s rated components engineered to handle the brutal torque and incredible speed. The Torque-Biasing Center Drive unit distributes the power for maximum wheels-up punch and unrelenting acceleration. Full steel-gear driveline, larger driveshafts, larger main bearings, strengthened bulkhead, heavy-duty ring and pinion gears, dual-fan motor cooling and more make this X-Maxx the ultimate monster. X-Maxx 8S Features: 30+ Volts of Extreme 8S Power Maxx Duty Drivetrain Torque-Biasing Center Drive 50+ MPH Out of the Box Specifications: Length: 29.84 inches (758mm) Front Track: 22.26 inches (540mm) Rear Track: 20.66 inches (525mm) Ground Clearance: 4 inches (102mm) Weight: 19.1lbs (8.66kg) Height (ride): 13.79 inches (350mm) Wheelbase: 18.92 inches (480mm) Skill Level: 6 Battery Tray: 197mm x 51.5mm x 44mm Needed To Complete: (4) "AA" Batteries (for transmitter) (2) 3S or (2) 4S LiPo Battery w/Traxxas iD Connector Compatible Battery Charger This product was added to our catalog on April 12, 2021

Read more less

97054-1, Traxxas TRX-4M 1/18 Scale Electric Rock Crawler w/Land Rover Defender Body The Traxxas TRX-4M 1/18 Electric Rock Crawler with Land Rover Defender Body is an adventure-driven micro crawler that can be found at your local hobby shop! The highly detailed ABS bodyshell features clipless mounting to the rigid C-channel frame. This frame is supported by four oil-filled GTM shocks to add control and keep the body from bouncing around. Scale straight axles are connected to the frame using full 4-link suspension. Adding to the performance, this truck features up to 45° steering angle to help tackle the trail ahead. Head over to your local hobby shop and inquire about the Traxxas TRX-4M Rock Crawler! While your local hobby shop will have the truck, here at AMain we have a wide array of option parts available to make your TRX-4M a fully capable crawling machine! Check out awesome screw kits, scale wheels and tires, and much more from some of your favorite brands in RC! Features: Highly detailed licensed body shell made of durable ABS Triangulated 4-link front and rear suspension Oil-filled GTM shocks Wheels and tires mounted to 7mm hex Full-time shaft-driven 4-wheel drive Low-CG Battery Tray Superior 45° steering angle Direct steering (no servo saver) Powerful Titan® 87-turn brushed motor ECM-2.5 Electronic Control Module incorporates ESC, receiver, and LED controller Fully waterproof for all-weather fun Includes transmitter, battery and charger for out of the box fun Specifications Scale: 1/18 Length: 11 inches (279mm) Wheelbase: 6.10 inches (155mm) Track Width: 4.9 inches (124mm) Height: 5.3 inches (135mm) Ground Clearance: 1.12 inches (29mm) Weight (w/o battery): 1.06lbs (483g) Approach Angle: 52° Breakover Angle: 45° Departure Angle: 41° Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Wheels: 1.0 x 0.49 inches (25.4 x 12.5mm) Tires: 2.2 x 1.0 inches (57 x 25.4mm) Motor: Brushed 180-Size 87T Differential Type: Fully Locked; 2:1 Axle Ratio Battery Tray: 50.5x31mm (LxW) Includes: (1) Traxxas TRX-4M Micro Rock Crawler with: (1) Officially Licensed ABS Hard Body (1) Titan 180 87-turn motor (1) ECM-2.5 Electronic Control Module (1) TQ transmitter (1) 7.4 volt 750mAh 2-cell LiPo battery (1) 2-amp USB fast charger with iD Tools for maintenance Needed to Complete: (4) AA Alkaline Batteries This product was added to our catalog on January 19, 2023

Read more less

76054-5, Traxxas LaTrax Teton 1/18 4WD RTR Monster Truck w/2.4GHz Radio, Battery & AC Charger The LaTrax Teton packs big all-weather adventure into a powerful 4-wheel drive off-road machine that's quick and versatile. This tough rig checks in at 1/18 scale, yet its purposeful design easily tackles rugged back-road terrain. Teton is built to go the distance, and is always ready for your next off-road adventure. The LaTrax Teton is perfect for any age driver or skill level and comes fully assembled, painted, and Ready-To-Explore™ with included 6-cell 7.2V NiMH battery pack and charger. Everything you need is included in the package. Waterproof, All-Weather Electronics  Waterproof, all-weather electronics means your fun doesn't stop just because of a little water. Teton doesn't slow down for puddles, mud, ice, or snow! It's total driving freedom! Drive the Teton where you want, when you want—the only limit is your imagination. 100% Fully Assembled and Ready-To-Explore  The 1/18 LaTrax Teton is fully assembled with a 2.4GHz radio system, painted and decaled body, and easy instructions. A LaTrax 7.2V rechargeable NiMH battery pack, AC wall outlet charger, and 4 Traxxas Power Cell AA alkaline batteries are also included. Everything you need for fun is in the box. Features: 1/18 LaTrax Teton ProGraphix® multi-colored painted body Powered by Traxxas for award-winning performance and support All-weather electronics for year round fun Four-wheel drive for superior off-road versatility and grip Powerful motor for aggressive acceleration and exciting speed Ready-To-Explore with included 6-cell 7.2V NiMH battery pack and AC wall outlet charger Fully independent suspension for exceptional off-road handling and control Smooth, Oil-filled shocks dampen the suspension motion Front and rear gear differentials Metal ring and pinion gears Simple and efficient shaft drive Durable construction that's built to last Specifications:  Length: 10.16" (258mm)  Front Track: 4.17" (106mm)  Rear Track: 4.23" (107.5mm)  Weight (with battery): 19.2oz (55g)  Weight (without battery): 13.3oz (430g)  Height (overall): 4.65" (118mm)  Wheelbase: 6.44" (163.5mm)  Electronic Speed Control: Waterproof Forward/Reverse ESC  Motor (electric): 370 Brushed  Transmission: 10T Pinion / 60T Spur  Gear Pitch: 0.5 Mod.  Radio System: 2.4GHz Radio  Skill Level: 1  Battery Tray Dimensions: 102mm x 35mm x 18mm  Included Batteries: 7.2V 6-cell NiMH with AC Wall Outlet Charger  Included Batteries: 4 "AA" (Transmitter) Needed To Complete: Nothing! Everything you need is in the box.  This product was added to our catalog or updated on April 4, 2022

Read more less

AXI00006, Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 2021 Ford Bronco comes out of the box fully assembled and ready-to-run. The SCX24 '21 Bronco features an exceptionally detailed and extra-durable ABS hard body! This authentic scale body is available in three color options based on current Ford Bronco factory colors. Details include molded door handles, mirrors, roof rails, a mounted spare tire and an optional second decal sheet to allow a personalized finish. Serious scale modelers will find that this Ford Bronco not only looks great and performs well, but also brings next level realism to the SCX24 platform. Complementing the detail of the scale Ford Bronco body, Axial includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires. The SCX24 Bronco is built on the proven and easy to drive SCX24 chassis. The SCX24 makes it easy to find RC adventures. Go crawling on your desk. Turn a messy room into an obstacle course. Build an indoor "crawl course table" - or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and 2S LiPo battery, while a 3-channel Horizon Hobby 2.4GHz radio system is included for precise, dependable control. So everything you need to hit the trails is in the box!  Features: Factory-assembled and ready-to-run, with 3-channel radio, 180 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Specifications: Height: 4.625" (117 mm) Front Track: 3.938 in (100.0mm) Width: 3.875" (98 mm) Rear Track: 3.938 in (100.0mm) Wheelbase: 5.19" (132 mm) Length: 8.75" (222 mm) Includes: (1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR (1) Horizon Hobby® 2.4GHz 3-Channel Radio System (1) Axial® AS-1 Micro Servo (1) Horizon Hobby® ESC/Receiver Combo (1) Dynamite® USB LiPo Charger (1) Dynamite® 88T 180-Size Brushed Electric Motor With Pinion (1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery (4) AA Batteries for Transmitter (2) Decal Sheets (1) Product Manual Needed to Complete: Everything you need to drive is included This product was added to our catalog on April 22, 2022

Read more less

AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 Deadbolt RTR 1/24 Scale Mini Crawler is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's ideal for indoor fun, but performs so well, its equally suited to outdoor adventures as well. Even new drivers will be well-equipped to tackle tough climbs and rough trails. Like it's SCX10 big brother, the SCX24 uses plenty of steel components - from the C-channel frame rails to the front and rear axles and dogbones. Offering ready to run simplicity, scale looks, and confident handling on any trail, the SCX24 has the strength to keep pushing onward and upward. The SCX24 chassis features a three-link front and four-link rear suspension for realistic handling. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. Plus, worm gear axles provide high ground clearance with a low gear ratio that helps to reduce torque twist. Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. The shrunk down Deadbolt body provides the classic stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar that makes the 1/10 Deadbolt a performer - and the realism continues right down to the licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter! Features: Includes radio system, ESC and transmitter batteries Includes motor and on-board LiPo battery Realistic narrow-stance rock crawler body in olive green or red Molded roll cage with realistic light bar Realistic driver figure and many other scale details Officially licensed KMC XD229 Machete Crawl wheels Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread) Full-time 4WD Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels Steel front and rear axles, front stub axles and dogbones provide strength and durability Rugged steel C-channel frame rails with bracing keep everything rigid and aligned Front and rear axles consist of a two-piece, molded plastic solid axle design 3-Link front and 4-link rear suspension supply optimal handling Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist Two LEDs in the front bumper for night driving Specifications: Approximate Assembly Time: No assembly required Batteries: 7.4V 350mAh 30C LiPo Body: Painted and trimmed Axial Deadbolt Charger: USB LiPo charger Chassis: Stamped steel rails Completion Level: Ready-To-Run Differential: Worm gear 16T/4T Drivetrain: 4WD Gear Pitch: 32-Pitch Ground Clearance: 1.06" (27mm) Height: 4.73" (120.2mm) Length: 7.8" (199.5mm) Motor Size: 180 Motor Type: Brushed Pinion: 10T Radio: AX-4 2.4GHz 2-channel Servos: AS-1 steering servo Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm) Size/Scale: 1/24 Speed Control: AE-6 ESC receiver/combo Spur Gear: 55T Suspension: Solid axle, front and rear Tire Diameter: 2.0" (51mm) Tire Tread: Nitto Trail Grappler M/T, large block tread Track: 3.9" 99.5mm) Vehicle Type: Crawler Water-Resistant: No Weight: 0.5lb (0.22kg) Wheel Diameter: 1.0" (26mm) Wheel Type: Black Plastic Licensed KMC XD229 Machete Crawl Wheel Width: 0.48" (12.4mm) Wheelbase: 5.25" (133.5mm) Width: 3.9" (99.5mm)   Includes:  (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck (1) Axial AE-6 ESC/receiver combo (installed) (1) Dynamite® 88T brushed electric motor (installed) (1) Axial AS-1 steering servo (installed) (1) Axial® AX-4 2.4GHz 2-channel radio (4) AA transmitter batteries (1) 350mAh 2S 7.4V LiPo battery (1) USB LiPo charger (1) Product Manual Needed to Complete: Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included! This product was added to our catalog on May 29, 2019

Read more less

ARA4302V3, Arrma Granite 4X4 V3 3S BLX 1/10 RTR Brushless 4WD Monster Truck w/Spektrum SLT3 2.4GHz Radio The Arrma 1/10 Granite 4X4 V3 3S BLX Brushless 4WD Monster Truck delivers jaw-dropping power and 50+ MPH brushless performance. Precision aluminum, tough steel and composite materials come together for an easy-to-maintain, super-durable vehicle design that’s now upgraded for even greater performance and durability. The GRANITE 4X4 3S BLX RTR is DESIGNED FAST, DESIGNED TOUGH — built for exciting bashing speeds and extreme, all-terrain toughness. Features that enhance its unstoppable performance include a stronger chassis and retained hinge pin plates; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings throughout. It also now includes a Spektrum SLT3 transmitter and SLR300 receiver. The transmitter is ergonomically designed for long periods of fatigue-free bashing and has a foam wheel for precise fingertip control, plus an improved hand grip and trigger feel. New drivers will be able to set throttle limits at 50% or 75% until they are ready to use the full speed potential. The SLT3 is compatible with Tactic SLT receivers to run other RTR vehicles you may own, and includes a third channel to control optional features such as lights and winches on models that have them. ARRMA now powers the GRANITE 4X4 3S BLX with a brushless system featuring its BLX100 ESC and the Spektrum Firma 3200Kv brushless motor. The combination provides incredible torque, acceleration and speed. The transmission and chassis are ruggedly engineered to take full advantage of the electronics’ power. It has the ingenious modular design perfected by ARRMA engineers for easy component access and maintenance. The power module, with improved dirt management, consists of the motor with ARRMA heatsink and cooling fan, plus motor plate, slipper clutch assembly and gear cover. The power module can be detached from the chassis as a complete unit by removing just one screw. With the power module removed, the slipper clutch can be reached easily for adjustments by taking out three screws that attach the gear cover. The gear ratio can be finely tuned as the power module now uses a sliding motor mesh design. A two-piece molding screwed to the truck’s chassis serves as its electronics module, containing a waterproof receiver box, servo mount and ESC tray. The SLR300 receiver mounts inside the receiver box for protection from dirt and moisture. The ultra-compact ESC is screwed to the top of the module, allowing quick access to the on/off switch, while the servo mounts to the side. All three components can be removed together, quickly and easily. The differential module houses each differential unit in an innovative yoke design. Only eight screws need to be removed to release the front and rear yokes. The power module can then be detached, allowing you to pivot the gearbox cases for differential access. The GRANITE 4X4 3S BLX RTR comes brushless-ready with 37T 1.35mod diffs with silicone O-rings. The large gears can withstand huge torque, and internal metal gears have been chosen for reliability during extreme bashing. Its full-time 4WD transmission uses strong front, rear, and centerline telescopic driveshafts that can’t be lost during heavy impacts, unlike dogbones. A simple, dependable, responsive steering assembly complements the ultra-reliable drive system and features a servo horn with built-in servo saver. The GRANITE 4X4 3S BLX RTR includes the waterproof Spektrum SPMS651 metal-geared digital servo for 15% more torque than the previous version’s ADS-7M servo. The self-bleeding, oil-filled shocks, now with silicone O-rings, use a tried and tested, coil-over design for simple maintenance and amazing handling. Their innovative rod-end has a molded-in spring perch for extra toughness. Extended height dirt defenders and a close-fitting body limit the amount of dirt and debris that can get into the chassis tub. Front and rear bumpers offer defense against impacts. Four dBoots Fortress MT tires on gunmetal multi-spoke wheels give the GRANITE 4X4 3S BLX superb bite on a multitude of surfaces. ARRMA has also installed a wheelie bar as standard. The aggressively styled truck body looks great while bashing and even better up-close and personal, with great attention to detail on the decal and body aesthetics. Choose green or red trim schemes. Features: Stronger chassis and retained hinge pin plates Steering with more clearance for stones Castellated slipper pad and sliding gear mesh Plastic locknut for slipper 23T Spline servo saver 37T 1.35Mod diffs with silicone O-rings Power Module with sliding gear mesh and improved dirt management Rubber shielded bearings throughout Oil-filled shocks with silicone O-rings Front and rear bumpers Tough gunmetal colored multi-spoke wheels Vented multi-terrain dBoots® Fortress™ MT tires BLX100 2S/3S waterproof* ESC *For details on waterproof standards, refer to the instruction manual. IC5™ connectors (EC5™) compatible Signature easy-access modular design Easy-access power module Easy-access electronics module Easy-access diff module removal front and rear Double wishbone suspension front and rear Metal-geared differentials Extended height dirt defenders Adjustable ride height Adjustable body mounts Adjustable turnbuckles High-speed center driveshaft support Wheelie bar 2-year limited warranty (see website for details) 50+ MPH (80+ km/h) speed achievable in optimum driving conditions on 3S LiPo Specifications: Ball Bearings: Full Ball Bearing Drivetrain Battery: Sold Separately Body: Painted, decalled and trimmed Charger: Sold Separately Chassis: Molded Composite Completion Level: Ready-To-Run Differential: 2 Gear Diffs Drivetrain: 4WD Final Drive Ratio: 10.83 Front Track: 13.46 in (342mm) Power Type: Electric Gear Pitch: 0.8MOD Ground Clearance: 1.85 in (47mm) Internal Gear Ratio: 2.85 Motor Type: Brushless - Sensorless Pinion: 15T Product Height: 8.11" (206 mm) Product Length: 18.74" (476 mm) Product Weight: 6.23lbs (2826g) Product Width: 13.46" (342 mm) Radio: Included Rear Track: 13.46 in (342mm) Receiver: Included Scale: 1/10 Servos: Included Shock Type: Oil-Filled, Coil-Over Springs Speed Control: Included Spur Gear: 57T Suspension: Independent Vehicle Type: Monster Truck Water-Resistant: Yes Wheelbase: 11.3 in (287mm) Includes: (1) ARRMA® GRANITE™ 4X4 3S BLX 1/10 Scale 4WD Electric Monster Truck RTR  (1) BLX100 2S/3S Waterproof* ESC (1) Spektrum™ Firma™ 3660 3200Kv Brushless Motor (1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter (1) Spektrum™ SLR300 Receiver (1) Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo (1) Product Manual *NOTE: For details on waterproof standards, refer to the instruction manual. Needed to Complete: 2S LiPo or 3S Hardcase LiPo Battery Compatible Charger LiPo Safe Charging Bag (4) AA Batteries This product was added to our catalog on March 5, 2021

Read more less

ARA2102, Arrma Granite Grom MEGA 4WD 380 Brushed 1/18 Monster Truck RTR w/SLT2 2.4GHz Radio, Battery & Charger The GRANITE GROM 4X4 Monster Truck upholds the same rigorous engineering standards as its larger ARRMA RC counterparts. Additionally, it features a clipless body mount design that ensures the body remains securely attached while remaining effortlessly removable for drivers of all ages. In the realm of small-scale RC basher models, it stands out as a leader, offering a unique blend of convenience, power, strength, and exceptional handling capabilities that enable you to take your stunts to the next level. The ARRMA GRANITE GROM 4X4 Monster Truck is built to withstand any challenge you throw its way. Its impact-absorbing front and rear bumpers are ready for intense bashing, flanking a robust composite chassis. Power is efficiently transmitted through a robust 4WD drivetrain with durable metal gears, connecting the MEGA 380 brushed motor to the rugged dBoots FORTRESS monster truck wheels and tires. The Spektrum SX110 steering servo boasts waterproof construction and dependable metal gear strength. Features: Awesome monster truck styling with three rad color options fast and easy body attachment and removal mounts High strength metal gear drivetrain Fully enclosed drivetrain for tertian versatility High strength composite chassis Ballistic 4WD drive train Powerful 2S LiPo fun Waterproof 25Amp Spektrum SLT 2-in1 ESC and receiver Waterproof Spektrum SX110 metal geared servo Spektrum SLT 2-channel 2.4GHz radio Specifications: Scale: 1/18 Length: 9.84in (249.9mm) Width: 7.87in (199.8mm) Height: 4.65in (118.1mm) Wheelbase: 6.5in (165.1mm) Weight: 28.2oz (800g) Drive: 4WD Power Source: Electric Assembly Level: RTR Includes: (1) 1/18 Arrma Granite Grom (1) 7.4V 1400mAh 2S LiPo Battery with IC2 connector (1) Spektrum S10 Smart G2 Mini 2S USB-C Charger Needed to Complete: (1) USB power adapter with QC 2.0/3.0 18W+ This product was added to our catalog on October 27, 2023

Read more less

92086-4, Traxxas TRX-4 1972 Chevrolet® K5 Blazer High Trail Edition Traxxas High Trail Edition TRX-4 models are the biggest and baddest trucks on the trail and now classic Blazer fans have reason to celebrate. The 1972 Chevrolet K5 Blazer gets the full High Trail treatment with a big, lifted stance and beautifully detailed body. Features: Factory-Installed Long Arm Lift Kit Detailed licensed 1972 Chevrolet Blazer body in two colors Clipless Body Mounting TQi 2.4GHz 4-Channel Radio System High/Low Transmission T-Lock Locking Differentials This product was added to our catalog on May 17, 2023

Read more less

CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio The CEN Officially Licensed Ford F450 SD KG1 Edition 1/10 RTR Custom Truck is an exciting, unique True Scale contender to the scale truck scene. This dually truck was developed to create the look of a custom lifted truck, with the features needed to keep you rollin' for the long haul. The KG1 Edition includes officially licensed KG1 Trident D wheels, and is available in either a silver mercury with black wheels, or candy apple red with gold wheels to create the ultimate cruiser.  This truck was made dust and water proof to protect the components on any track or trail. Over heat protection and throttle signal loss prevention give you the feedback needed to not over-do a good time or lose control of your truck. A Pistol-Grip AMP 30 3 Channel Transmitter is included in this Ready to Run, featuring digital trim and a built in fail-safe to help you stay in control. CEN paid attention to the details with the components as well, with hardened steel components, super scale features and a full selection of option parts designed to allow easy customization. Features: SC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather Built-In Capacitor Module Automatic throttle range calibration Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery Over-Heat protection and throttle signal loss protection Easily programmed with jumpers Motor-RS-550 high Torque Motor (Power By Mabuchi Motor) Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm 6.0V 0.23 sec/60deg 12.0 kg-cm 25T Horn Gear Spline Radio System: Pistol-Grip AMP 30 3 Channel Transmitter Digital Trimming Steering Dual-Rate (ST D/R) Adjustment End Point Adjustment (EPA) Built in Fail-safe Chassis: Steel Frame Rails CMS (Chassis Mounted Servo) Chassis Design Stamped Steel Shock Hoops Steel Skid Plate Full Precision Ball Bearing Support Adjustable Turnbuckles High Torque Servo Horn Safer Suspension: 3 Links Suspension with Panhard Bar Design Big Bore Oil Filled Adjustable Coil Over Shocks Harden Steel Steering Drag Link Sway bar included 6mm Aluminum Linkage Drivetrain: 4 Wheel Drive Center Shaft Drive Train for more power transferred to the wheels Highly Efficient Transmission System Wide Range Easy Changeable Gear Box Design Sealed transmission eliminates dirt and dust Sealed Axle housing 5mm Hardened Steel Axle shaft Differential Center Locker Front/Rear Planetary Gear Type Metal Transmission Gears Planetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 5.51 lb. (2.5kg) Battery: 2s Lipo recommended Includes: (1) Ford F450 SD KG1 Edition True 1/10 Scale RTR Custom Truck   Needed to complete: 2S Lipo w/T-Style Connector Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on December 29, 2021

Read more less

LOS03035, Losi 22S '69 Camaro No Prep 1/10 RTR Brushless Drag Race Car w/Spektrum SLT3 2.4GHz Radio The Losi 22S '69 Camaro No Prep 1/10 RTR Drag Race Car combines the innovative design and the quality workmanship drivers expect from Losi, in a ready to run package that makes it easy to hit the track and make fast passes. The 69 Camaro has been carefully crafted to offer an authentic and scale look, while still fitting into the rules and regulations set by the No-Prep Drag Racing scene. It has all the advantages of an aluminum chassis such as electronics protection, side impact guards, and a clean wire management system with plenty of 22S option parts. It's designed with racers in mind with many outstanding features including officially licensed Mickey Thompson tires, limited travel oil filled front and rear shocks, low center of gravity rear shock tower, extended body mounts, optional heavy duty sway bar, adjustable weight front bumper, elevated transmission, adjustable turnbuckles, and a fully adjustable wheelie bar. You get an all-metal gear transmission for concrete dependability, a Spektrum SLT3 transmitter and dual protocol receiver, Spektrum Firma 100 amp Smart ESC, and Spektrum Firma 6500kv brushless motor. Features: Spektrum Firma 100 Amp Smart ESC Spektrum Firma 6500kv Brushless Motor Spektrum SLT3 Transmitter and Dual Protocol Receiver 22S aluminum chassis Officially Licensed 1969 Chevrolet Camaro Body Officially Licensed Summit Racing Trim Scheme (Available on the T1 version) LED Lights Mickey Thompson branded Large Rear Drag Racing Slicks Mickey Thompson branded Low Drag, Front Tires All Metal Gear Transmission Elastomer Battery Straps Full Adjustable Wheelie Bar Aluminum Option Parts Available In Depth Features: Spektrum Firma 100 Amp Smart ESC: Spektrum Firma 100A Smart ESC for surface vehicles (With Drag specific programming) is waterproof and delivers power and intelligence all-in-one. Without additional sensors or modules, they feed battery and ESC telemetry data straight to your radio in real time, all over one connection. Spektrum Firma 6500Kv Brushless Motor: The Firma 6500Kv brushless motor features a lg 4-pole 8-magnet rotor design, CNC machined aluminum housing, insulated high purity copper windings, high-quality alloy steel 3.175mm (1/8") output shaft, and precision bearings for high durability and smooth rotation. Preinstalled 4mm gold plated bullet connectors. SLT3 3-Channel SLT Radio System: The SLT3 is much more than an economical 3-channel radio. Together with the included SR315 receiver, it's the most affordable radio system available that offers Spektrum quality range, response, and interference resistance while also laying the groundwork to upgrade later for superior DSMR® control and Smart connectivity. Its SLT protocol is compatible with the Spektrum SPMSLR300 (SLT Protocol Receiver) and legacy Tactic receivers, such as the TR325, that are included with some ready-to-run vehicles. Spektrum SR315 Dual Protocol Receiver: The SR315 dual protocol receiver included with the SLT3 radio system not only supports the transmitter's SLT 2.4GHz technology but is also compatible with Spektrum DSMR® protocol. It's ready when you are for stepping up to next-level transmitters such as the DX5 Pro, DX5 Rugged, and DX5C. The receiver supports Spektrum Smart Technology, too — paving the way for you to enjoy Smart connectivity advantages when using it with Smart transmitters, ESCs, and batteries. Mickey Thompson ET Drag Tires: The Mickey Thompson licensed rear tires will surely give you a great grip on the road, making sure you have the ultimate traction for the high powered brushless system that is included. Mickey Thompson Ultra Light Front Runner Tires: Mickey Thompson licensed front tires will provide you with plenty of tracking while having lower drag characteristics. 3mm Aluminum Chassis: The Drag Car Roller comes standard with a 3mm Aluminum chassis to provide accurate and positive grip to the road when you are pushing the limits of power and traction. This chassis is designed with electronics protection, side impact guards, and a clean wire management system. Front Bumper with Adjustable Weight Placement: Fine tune the weight of the front end to keep it under control and on the ground. Precise Adjustable Wheelie Bar: The Drag Car Roller incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run. Elastomer Battery Straps and Adjustable Battery Position: Fine tune the position of your battery with the addition of elastomer battery straps and make your battery changes quick and easy. No more messing with clunky hook and loop. Simply slap your battery in, pull across the strap and hook it. Oil-filled Internal limited Coil-Over Spring Shocks: These shock absorbers help keep the car incredibly stable and so you can maintain total control on even the toughest drag strips. Internal limiters help eliminate body roll and keep the car planted to the track. Bleeder Shock Caps: Bleeder caps help you fine tune your shocks and get the perfect feel every time. Fully Adjustable Turnbuckles: For added adjustability and tune-ability, adjustable turnbuckles come standard. All Metal Gear Transmission: The Drag Car Roller comes with an all metal gear transmission for bullet-proof reliability to withstand anything you throw at it. Get your car down the lane without the fear of a broken transmission gear! Sealed Gear Differential: The sealed gear differential comes standard with 500,000k diff oil installed allowing you to throw as much power as you want. Specifications: Scale: 1/10 Length: 25.1" (638 mm) Width: 11.08" (281 mm) Height: 6.6" (168 mm) Wheelbase: 13.1" (333 mm) Drivetrain: 2WD Power Type: Electric Motor Type: Brushless - Sensorless Gear Pitch: 48P Pinion: 16T Internal Gear Ratio: 2.43:1 Completion Level: Ready-To-Run Includes: (1) Losi 1969 Camaro Drag Car RTR (1) Spektrum Firma 100 amp Smart ESC (installed) (1) Spektrum Firma 6500kv Brushless Motor (installed) (1) Spektrum SLT3 Transmitter and Dual Protocol Receiver (installed) (1) Product Manual Needed to Complete: 2-3S LiPo Battery with IC5/EC5 Connector LiPo Compatible Charger Assorted tools (see manual for details) This product was added to our catalog on October 21, 2021

Read more less

58034-8, Traxxas Slash 1/10 RTR 2WD Short Course Truck w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger The Traxxas Slash 1/10 RTR Short Course Truck has been meticulously crafted for durability, performance, and pure enjoyment. Equipped with the formidable Titan 12T 550 motor and the rock-solid reliability of the XL-5 electronic speed control, the Slash fearlessly tackles every high-flying, fender-banging adventure you throw its way. Its water-resistant electronics ensure the fun continues even in wet weather. Grab your transmitter and brace yourself for thrilling dirt-roosting power slides. The Slash boasts a resilient design, built on the proven modular tub chassis featuring a fully independent suspension with heavy-duty steel turnbuckles for precise camber and toe adjustments. Powering its dynamic performance is the Titan 550 motor, seamlessly connected to the brushless-ready Traxxas Magnum 272 transmission. To keep those wheels spinning, heavy-duty Traxxas driveshafts ensure reliable power transfer, making every ride a thrilling experience! The resilient clipless body of the Slash steadfastly endures the most rigorous actions, secured by robust latches that tightly grip the frame. These heavy-duty latches, while holding the body securely, effortlessly release within seconds, granting swift access to the chassis. The ingenious hidden latching system of the Slash eliminates the need for cumbersome body clips, replacing them with sizable reinforced panels designed to withstand pull-through damage, ensuring durability and convenience. CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately). Features: Clipless body mounting system 4-amp USB-C NiMh Fast Charger Fully adjustable steel turnbuckles Brushless-Ready metal gear Magnum 272 transmission Lightning-fast Titan 12-Turn 550 brushed motor delivers blistering speeds over 30MPH! Reliable Waterproof XL-5 Electronic Speed Control with three driving profiles 100% Fully assembled and Ready-To-Race Specifications: Scale: 1/10 Length: 22.8in (578mm) Width: 11.65in (296mm) Wheelbase: 13.2in (335mm) Weight: 76.2oz (2160.2g) Power Source: Electric ESC Voltage: NiMH: 6-7 Cell NiMH (7.2-8.4V) LiPo: 2S LiPo (7.4V MAX) Drive: RWD Gear Pitch: 48P Gear Ratio: 2.72 (final drive: 12.58) Assembly Level: Ready To Run Includes: (1) Traxxas RTR Slash (1) 3000mAh Battery with Traxxas ID Connector (1) USB-C Battery Charger (1) User Manual Needed To Complete: (4) AA Batteries for Transmitter This product was added to our catalog on September 27, 2023

Read more less

ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger The Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751). This buggy was engineered using Team Associated's vast knowledge and success in the 1:10 scale 2WD racing category. Since the introduction of the RC10 in 1984, the Team Associated RC10 buggy platform has won 13 of the 18 I.F.M.A.R. World Championships contested since the class began. You now have the chance to drive a buggy derived from this race-winning heritage with the beginner-friendly, capable and powerful RB10. The RB10 buggy roars to life with a water-resistant high-power Reedy brushless speed control, 3300kV brushless motor, a 2.4GHz 2-channel radio system and the Drive Vehicle Control (DVR) receiver with a built in gyro. The DVR system is able to be tuned to different settings that will allow for more or less gyro control. The RB10 is equipped with the Reedy metal-gear, digital high-torque servo, and a water-resistant enclosed receiver box. All of this sits under the outstanding factory-finished off-road buggy body with wing. The RB10 will keep you accelerating and cornering with the included aggressive off-road treaded tires and lightweight 12mm hex wheels. The RB10 will perform on most surfaces you throw it at, from asphalt to dirt as well as any prepared track surfaces. This buggy makes for a great basher and a good platform to try your skills out on the track. Features: Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751) 2.4GHz 2-channel radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro High-torque, metal-gear Reedy servo with spring style servo saver Powerful Reedy 3300kV brushless motor Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff Water-resistant, enclosed receiver box Factory-finished off-road buggy body and wing, with two color schemes to choose from (blue and red) Off-road buggy race car-inspired dish wheels High-grip, off-road tires with aggressive tread pattern Aluminum 12mm big bore coil-over shock absorbers Durable and lightweight aluminum top shaft Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs Rear CVA driveshafts for more durability 2.6:1 ratio gearbox with heavy-duty sealed gear differential and extremely adjustable slipper clutch Rugged steel turnbuckles for adjustable camber and front toe-in Adjustable suspension geometry Vertical ball ends for roll center adjustments, front and rear Metric hardware throughout 22 precision rubber-sealed ball bearings Many Factory Team options already available! Specifications: Scale: 1:10 Power Source: Electric Terrain: Off-Road Body Style: Buggy Assembly Level: Assembled Power: Electric Length: 400mm (15.75”) Width: 248mm (9.76”) Wheelbase: 277.8mm (10.94") Weight: 1405g (3.1lb) Drive: 2WD Transmission Ratio: 2.6:1 Includes: (1) Team Associated RB10 RTR 2WD Buggy (1) 2.4GHz 2-channel Radio (1) Reedy Charger (1) Reedy 2S Lipo Battery Needed to Complete: (4) AA Batteries for Transmitter This product was added to our catalog on May 11, 2023

Read more less

ARA4202V3, Arrma Granite 4x4 V3 550 Mega RTR Monster Truck (Red) w/Spektrum SLT3 2.4GHz Radio The Arrma Granite 2S 4x4 V3 550 Mega RTR Monster Truck comes out of the box ready to bash in any terrain. This version features equipment that further increases the original monster truck’s already impressive performance and durability. The GRANITE 4X4 MEGA RTR Monster Truck is DESIGNED FAST, DESIGNED TOUGH — built for exciting bashing speeds and extreme, all-terrain durability. Features to enhance its unstoppable performance include a stronger chassis and retained hinge pin plates; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber shielded bearings throughout. The monster truck now also includes the Spektrum SLT3 transmitter and SLR300 receiver. The transmitter is ergonomically designed for long periods of fatigue-free bashing and has a foam wheel for precise fingertip control plus an improved hand grip and trigger feel. New bashers will be able to set throttle limits at 50% or 75% until they are ready to use the full speed potential. The SLT3 is compatible with Tactic SLT receivers to run other RTR vehicles you may own, and includes a third channel to control optional features such as lights and winches on models that have them. It retains the ingenious modular design perfected by ARRMA engineers for easy component access and maintenance. The power module, with improved dirt management, consists of a MEGA 550 motor, motor plate, slipper clutch assembly and gear cover. The power module can be detached from the chassis as a complete unit by removing just one screw. With the power module removed, the slipper clutch can be reached easily for adjustments by taking out three screws that attach the gear cover. The gear ratio can be finely tuned as the power module now uses a sliding motor mesh design. A two-piece molding screwed to the truck’s chassis serves as its electronics module, containing a waterproof receiver box, servo mount and ESC tray. The SLR300 receiver mounts inside the receiver box for protection from dirt and moisture. The ultra-compact ESC is screwed to the top of the module, allowing quick access to the on/off switch, while the servo mounts to the side. All three components can be removed together, quickly and easily. The differential module houses each differential unit in an innovative yoke design. Only eight screws need to be removed to release the front and rear yokes. The power module can then be detached, allowing you to pivot the gearbox cases for differential access. The GRANITE 4X4 MEGA RTR comes brushless-ready with 37T 1.35mod diffs with silicone O-rings. The large gears can withstand huge torque, and internal metal gears have been chosen for reliability during extreme bashing. Its full-time 4WD transmission uses strong front, rear, and centerline telescopic driveshafts that can’t be lost during heavy impacts, unlike dogbones. A simple, dependable, responsive steering assembly complements the ultra-reliable drive system and features a servo horn with built-in servo saver. The GRANITE 4X4 MEGA RTR includes the waterproof Spektrum SPMS650 digital servo for 20% more torque than the previous version’s ADS-5 servo. The self-bleeding, oil-filled shocks, now with silicone O-rings, use a tried and tested, coil-over design for simple maintenance and amazing handling. Their innovative rod-end has a molded-in spring perch for extra toughness. High chassis guards limit the amount of dirt and debris that can get into the chassis tub. Shock-absorbing loops keep the front and rear bumpers secured to the chassis, offering defense against heavy impacts. Tough, multi-spoke black MT wheels with dBoots Fortress MT tires give the GRANITE 4X4 MEGA RTR effective traction for bashing on almost any terrain. Multiple battery types can be used with the hook-and-loop mounting, from 6-cell NiMH packs to a 2S block pack. This version comes with a Dynamite 3300 mAh 8.4V 7-cell Speedpack 2 Hump NiMH battery that provides 35% more run time compared to the 2400mAh pack of its predecessor. Features: Stronger chassis and retained hinge pin plates Steering with more clearance for stones Castellated slipper pad and sliding gear mesh 23T Spline servo saver Brushless-ready 37T 1.35Mod diffs with silicone O-rings Power Module with sliding gear mesh and improved dirt management Rubber shielded bearings throughout Oil-filled shocks with silicone O-rings New body design, front and rear bumpers, paint and decals New vented tires MEGA 12T brushed 550 motor MEGA waterproof* ESC IC3™ connectors (EC3™) compatible Signature easy-access modular design Easy-access power module Easy-access electronics module Easy-access diff module removal front and rear Double wishbone suspension front and rear Metal-geared differentials Adjustable ride height Adjustable body mounts Extended height dirt defenders Multi-terrain dBoots® Fortress™ MT tires Tough multi-spoke black MT wheels ADC-N7 7-cell NiMH wall charger 2-year limited warranty (see website for details) 30MPH (48km/h) speed achievable in optimum driving conditions with optional gearing Specifications: Ball Bearings: Transmission Battery: Included Body: Painted, decalled and trimmed Charger: Included Chassis: Molded Composite Completion Level: Ready-To-Run Differential: 2 Gear Diffs Drivetrain: 4WD Final Drive Ratio: 18.5 Front Track: 13.46 in (342mm) Power Type: Electric Gear Pitch: 48-pitch Ground Clearance: 1.85 in (47mm) Internal Gear Ratio: 2.85 Motor Type: Brushed Pinion: 14T Product Height: 8.11" (206 mm) Product Length: 17.76" (451 mm) Product Weight: 6.69lbs (3035g) Product Width: 13.46" (342 mm) Radio: Included Rear Track: 13.46 in (342mm) Receiver: Included Scale: 1/10 Servos: Included Shock Type: Oil-Filled, Coil-Over Springs Spur Gear: 91T Suspension: Independent Track: 13.46 in (342mm) Vehicle Type: Monster Truck Water-Resistant: Yes Wheelbase: 11.3 in (287mm) Includes: (1) ARRMA® GRANITE™ 4X4 MEGA 550 1/10 Scale 4WD Electric Monster Truck RTR (1) MEGA Waterproof* ESC (1) MEGA 12T Brushed 550 Motor (1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter (1) Spektrum™ SLR300 Receiver (1) Spektrum™ Waterproof* SPMS650 Digital Servo (1) Dynamite® 3300mAh 8.4V 7-Cell Speedpack® 2 Hump NiMH Battery (1) ADC-N7 7-Cell NiMH Wall Charger (1) Product Manual Needed to Complete: (4) AA Batteries This product was added to our catalog on August 26, 2021

Read more less

LOS05020V2, Losi Desert Buggy DB XL-E 2.0 8S 1/5 RTR 4WD Electric Buggy w/DX3 Radio, Smart ESC & AVC The Losi Desert Buggy DBXL-E 2.0 8S 1/5 RTR 4WD Electric Buggy is a large scale basher that offers agile handling, high speeds out of the box and legendary durability that make it a fan favorite. At home in any environment from dirt to pavement, wet or dry, especially with its 4WD drivetrain with larger 5mm drive pins, the desert buggy makes sure all the power is put to the ground. Drivers stay in control with a DX3 transmitter, a Spektrum SR6100AT 6 Channel AVC Telemetry Surface Receiver, and scale-to-size Maxxis Creepy Crawler LT tires. This desert buggy features all the technological advances drivers demand including the Spektrum Firma 160 Amp Brushless Smart ESC and Spektrum Firma 4-Pole 780Kv Brushless Motor allowing you to hit 50+ MPH with an 8 cell LiPo battery. Combine this with Fox Shox race-inspired motorsports themed livery, and you get an authentic looking large scale buggy with the speed and durability needed to outrun the pack. Features: Spektrum™ Firma® 160 Amp Brushless Smart ESC Spektrum Firma 4-Pole 780Kv Brushless Motor Spektrum DX3™ radio system Spektrum S906 1/5th Scale Metal Gear Servo Waterproof Components Aluminum Shock Towers Aluminum Center Diff Cup Radio Tray designed for use with single or dual steering servos. Heavy Duty Drivetrain with 5mm drive pins Electric Chassis specific chassis braces for increased durability and strength Updated ESC Mount Pinned Center Outdrive Cups Gearboxes updated for improved drivetrain strength and stability Steering Rack with a helical servo saver design Updated Front and Rear Bulkheads Maxxis Creepy Crawler LT Tires Fox Shox race-inspired Motorsports themed livery Laser Etched FOX Logo Shock Caps Roof-mounted LED bar Specifications: Approximate Assembly Time: Less than 1 Hour Ball Bearings: Full set Battery: Sold Separately Body: Screen printed polycarbonate panels Brakes: Integrated with ESC Charger: Sold Separately Chassis: 0.16" (4mm) thick 6061-T6 aluminum with stiffening plate Completion Level: Ready-To-Run Differential: Bevel gear, sealed, oil-filled Drivetrain: 4WD Final Drive Ratio: 12.82:1 Power Type: Electric Gear Pitch: 1.5 Module Ground Clearance: 2.75" (552mm) Internal Gear Ratio: 3.33:1 Max Battery Dimensions: 6.5 x 2 x 0.87" (165 x 52 x 22mm) Motor Size: 56113 4-pole 780Kv Motor Type: Brushless Pinion: 13T Product Height: 12.5" (318 mm) Product Length: 33.25" (845 mm) Product Weight: 28.3 lbs (12.8kg) w/o batteries, 30.5 lbs (13.8kg) with batteries Product Width: 19.5" (495 mm) Radio: Included Receiver: Included Scale: 1/5 Servos: Included Shock Type: Oil-filled, aluminum body Speed Control: Included Spur Gear: 50T Suspension: Independent Technology: Smart Tire Tread: Creepy Crawler Vehicle Type: Buggy Water-Resistant: Yes Wheelbase: 21.75" (552 mm) Wheel Width: 3.0 Includes: (1) Losi® DBXL-E 2.0 Desert Buggy (1) Spektrum Firma® 160 Amp Brushless Smart ESC (installed) (1) Spektrum Firma 4-Pole 780Kv Brushless Motor (installed) (1) Spektrum™ DX3™ Radio System (1) Product Manual Needed to Complete: (2) 4S 5000mAh 50C+ LiPo Hardcase Batteries with IC5 or EC5 connector Compatible LiPo charger This product was added to our catalog on March 30, 2023

Read more less

YOKDP-YD2RTR-1, Yokomo YD-2 1/10 2WD RTR Drift Car w/Supra Body (Red or White) The Yokomo YD-2 1/10 2WD RTR Drift Car with Supra Body offers the prowess of the RWD YD-2 chassis in a ready to run option. The YD-2 chassis has quickly become a preferred chassis in the drift world and now comes in this pre-built form giving both beginners and experts an easy entry into drifting. Utilizing more than 90% of the same parts used on the YD-2Z platform offers the user an abundance of compatible option parts and upgrades. Featuring fine tuned steering geometry gives incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis this Yokomo 1/10 2WD RTR Drift Car kit offers an unsurpassed value. Features: Pre-Built RTR (Ready to Run) vehicle Upgradable chassis based on the latest model YD-2Z 2.4GHz radio system 27-turn motor for drifting Equipped with steering gyro Nickel-metal hydride 1600mAh battery AC quick charger PANDEM GR Supra Painted body Drift exclusive tires & wheels Needed to Complete: (4) AA Batteries for the Transmitter This product was added to our catalog on May 29, 2023

Read more less

92076-4 - TRX-4® Scale and Trail™ Crawler with 2021 Ford Bronco Body: 1/10 Scale 4WD Electric Truck. Ready-to-Drive® with TQi Traxxas Link™ Enabled 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor. AN OFF-ROAD LEGEND RETURNS After 25 years, the Bronco returns as Ford’s top-performing 4X4 and America’s most sought-after SUV. Traxxas captures the eagerly-anticipated Bronco in exacting detail with all the capability and versatility of the award-winning TRX-4. The Traxxas Bronco combines Ford-approved realism and class-leading performance for exciting off-road adventure no matter where the trail takes you. MODEL 92076-4: 1/10 Scale 4X4 Trail Truck, Fully-Assembled, Waterproof electronics,Ready-To-Drive®, with TQi™ 2.4GHz 4-channel Radio System, XL-5 HV Speed Control,Hi/Low Transmission, Remote Locking Differentials, and painted body Ford Motor Company Trademarks and Trade Dress used under license to Traxxas.

Read more less

YOKSP-03DV2, Yokomo SP-03 D V2 Programable Brushless Drift Servo (High Voltage) (Black, Purple, Red) This is the Yokomo SP-03 D V2 Programmable Brushless Drift Servo. The SP-03D V2 is equipped with an updated program that offers faster speed, higher torque, and incredible holding power. In order to maximize performance of the brushless motor, this servo is capable of supporting up to 7.4V DC. While greatly improving the basic performance, the steering holding power is increased to enhance stability during cornering, with an incredible linear feeling while driving. As a drift-only servo, the hunting suppression function that prevents malfunction is just as important as the specifications. This suppression function is also equipped with the latest program, which makes it possible to run the steering gyro with a higher gain than normal. If you use a dedicated programmer, you can change the performance of the servo and the hunting suppression level, so you can fine-tune the steering characteristics to your liking. Features: Adjustable to suit your track surface via a new design program card Full aluminum case that enhances both cooling and looks To prevent weight increase in the front we have designed weight reduction into the case Brushless motor & high voltage power gives outstanding precision and torque High precision aluminum gear set used for weight reduction and high dive efficiency Specifications: Operating Voltage: 4.8V-7.4V Torque: @4.8V: 180 oz-in (13kg.cm) @6.0V: 222 oz-in (16kg.cm) @7.4V: 249 oz-in (18kg.cm) Size: 1.6x0.79x1.02in (40.8x20.2x26.1mm) Weight: 1.72oz (49g) Color: Black, Purple, Red This product was added to our catalog on January 10, 2023

Read more less

AXI03022B, Axial Capra 1.9 4WS Unlimited Trail Buggy 1/10 RTR 4WD Rock Crawler w/DX3 2.4GHz Radio The Axial Capra 1.9 4WS Unlimited Trail Buggy 1/10 RTR 4WD Rock Crawler is ready to give you a more effective way to combat the trail. Axial has equipped this Capra model with 4-wheel steer for enhanced maneuverability and performance. Using the functions found on the included transmitter, you can steer the axle from 0 (straight), to 50% or 100% left and right. Get ready to dominate the trail with the Axial Capra 1.9 equipped with 4-wheel steering. The transmission includes an optional Dig setup that is disabled from the factory (and requires an optional to a 4-channel radio and micro servo for use - not included). To have Dig and rear steering capabilities, remove the spacer from inside the transmission and install your micro servo. With the flick of a transmitter button, you can now activate Dig and lock the rear drive axle. That allows you to pull the buggy around by the front end while holding the rear in place. The tube chassis of the Capra 1.9 4WS Unlimited Trail Buggy offers realistic scale rock crawler buggy looks and is optimized for suspension and tire clearance. Currie F9 Portal Axles deliver 45° of steering with extra ground clearance. Both axles feature metal universals that produce smooth action for an efficient and durable drivetrain. All links and suspension pivots are made of rust-proof stainless steel and provide precise, durable suspension points. The included Spektrum DX3 transmitter features exclusive DSMR technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the vehicle's Spektrum Firma 2-in-1 40A Smart ESC/Receiver. Using a Spektrum Smart LiPo pack, you can follow on-board battery capacity on the transmitter's voltage level indicator while driving with confidence in any weather and trail conditions - the electronics are protected by a waterproof and dustproof design. Features: Includes front and rear steering out of the box for the ultimate in precise maneuverability Also includes an optional Dig setup — unlock the Dig transmission and upgrade to a 4-channel radio and micro servo to operate the Dig feature while also having rear steering Currie F9 Portal Axles offer 45° of steering with extra ground clearance for the best crawling performance Tube chassis design offers the realistic scale looks of a rock crawler buggy and is optimized for suspension and tire clearance Included Spektrum™ DX3™ 2.4GHz DSMR® radio provides superior range, response, and interference resistance and is compatible with Smart technology Front and rear axles each come with a Spektrum™ S614 Metal-Gear servo installed for steering Licensed Nitto Trail Grappler M/T tires offer a wider tire patch and more traction Metal universal joints on both axles provide smooth action and 45 degrees of steering for an efficient, high-performance drivetrain Specifications: Length: 17" (432 mm) Width: 10.25" (260 mm) Height: 8.25" (210 mm) Weight: 4.5lbs (2.04kg) Wheelbase: 12.5" (318 mm) Front Track: 8.75" (222.25mm) Rear Track: 8.75" (222.25mm) Ground Clearance: 3" (76.2mm) Internal Gear Ratio: 5.14:1 Final Drive Ratio: 37:1 Includes: (1) Axial Capra 1.9 1/10 4WS Unlimited Trail Buggy RTR with: (1) Spektrum Firma 40A Brushed Smart 2-in-1 ESC and Receiver (installed) (1) Axial 35T Brushed Motor (installed) (2) Spektrum 15Kg Waterproof Servo 23T (installed) (1) Axial LED Light Set (installed) (1) Spektrum DX3 2.4GHz Smart 3-Channel Radio Transmitter (4) AA Transmitter Batteries (1) Product manual Needed to Complete: (1) 2-3S LiPo Battery with IC3 or EC3 Connector (1) Compatible Battery Charger This product was added to our catalog on March 2, 2022

Read more less

64077-3, Traxxas XO-1 1/7 RTR Electric 4WD On-Road Sedan w/2.4GHz TQi Radio, TSM, Link Module & Castle ESC Traxxas XO-1 1/7 RTR Electric 4WD On-Road Sedan - 100mph RC Car The Traxxas XO-1 is the fastest and most outrageous Ready-to-Race RC car ever created. From a dead stop, 60mph flashes by in 2.3 seconds. Keep the throttle pegged and you’ll smash the 100mph barrier in 4.92 seconds**. Improvements to the aero package make XO-1 even easier to drive at the limit and more fun than the previous model. Plus, tires rated to 100mph and a genuine Castle Creations Mamba Monster Extreme ESC round out the package to create one of the most thrilling RC cars to ever hit the pavement. Features: Stable Aerodynamics: From top to bottom, XO-1 is a masterwork of intelligent aero design. The sculpted supercar body slices through the wind for record-breaking speed. Redesigned high-downforce canards on the front splitter and a revised rear wing provide superior high-speed stability. A high-tech NACA duct under the chassis routes cool air around the motor with a rear body vent for hot air to escape. 100+mph Top Speed: The Traxxas XO-1 is a brutally fast hypercar intended for only the most experienced drivers. Aerodynamic improvements make XO-1’s performance more accessible than ever before with predictable straight-line performance and confidence-inspiring handling. Belted slick tires and a revised rear wing keep the XO-1 glued to the pavement whether you’re testing its top speed potential or carving up a tight race course. Big Block Power: XO-1’s legendary speed wouldn’t be possible without explosive power and XO-1 brings big-block 6s brushless horsepower to the table. Weighing almost two pounds, the massive Traxxas Big Block motor pumps out supercar speed and gut-wrenching torque for brutal acceleration. The finely-tuned Mamba Monster Extreme ESC delivers 25+ volts of ferocious power with scalpel-like precision. 6061 Aluminum Chassis Core: Constructed of lightweight 6061 aluminum, XO-1's lower chassis adds superior strength and doubles as a heat sink for the power system.  Computer Optimized Aerodynamics: XO-1 sets the standard for high performance air management with its redesigned front splitter and high downforce canards. Combined with the revised high downforce rear wing, they strike the perfect balance between the front and rear for maximum stability in the critical 30-70mph zone. A high tech NACA duct supplies cool air to the motor with a rear vent in the body to evacuate heat for peak efficiency. Extruded Aluminum Driveshaft: XO-1's extruded center driveshaft is lightweight and incredibly strong. Internal splines fit securely onto the input shafts of the front and rear drive assemblies for slip proof grip. Mamba Monster Extreme Speed Control: Traxxas partnered with Castle Creations to develop the Mamba Monster Extreme speed control. From its integrated capacitor bank to the proprietary software created just for XO-1, the Mamba Monster Extreme represents the state of the art in big volt power delivery.  Traxxas Big Block Brushless Motor: Weighing nearly two pounds, the Traxxas Big Block motor is the largest brushless motor ever fitted in a Traxxas model. The big block features a finned, heat dissipating can, oversize premium bearings, and powerful sintered Neodymium magnets for massive acceleration and supercar performance.  Speed Rated Belted Tires: XO-1's slick tires are the first to be rated for 100+ mph. Zero stretch belting reinforces the soft compound rubber with foam inserts to support the tread. The tires come pre-glued to extra wide black chrome split spoke wheels for maximum traction. Traxxas TQi Radio System: The fully featured TQi 2.4GHz radio system delivers superior speed, precision and long distance control. The transmitter uses Bluetooth to connect to your smart phone using the INCLUDED TRA6511 wireless module. The Traxxas Link app allows you to adjust your settings and view real time telemetry. Traxxas Stability Management: Traxxas Stability Management (TSM) works behind the scenes to keep XO-1 arrow straight during full throttle acceleration and heavy braking. TSM allows you to drift your car controllably around a track, while helping to prevent spinouts and loss of control on slippery surfaces. Adjust the amount of assistance from off, to 100% right from your transmitter. Installed Real Time Telemetry: XO-1 comes fully outfitted with pre-installed telemetry sensors to collect and record real time telemetry data as you drive. Connect your mobile device and the Traxxas Link dashboard comes to life in vibrant color showing you speed, battery voltage, RPM and temperature with fully customizable gauges.  Large 1/7 Scale Size: At a full 27 inches long and 12 inches wide, XO-1 commands attention on the road. Its extra large footprint improves stability, increases traction, tolerates road imperfections, and delivers high speed handling that no 1/10 touring car can match. NOTE: The XO-1 is not a toy and is intended for use by experts only. Be sure to read and understand all warnings and precautions that accompany the product. *Unlock the 100+mph speed only with the Traxxas Link App. High-speed gearing and speed wing (included), and two 3-cell 5000mAh Power Cell LiPo battery packs (part TRA2872, sold separately) are required for 100+mph operation. **Unlocking 100+mph speed capability requires the Traxxas Link Application installed on your Android or iOS-equipped mobile device. For device compatibility and to download the free app, please visit Google Play or the App Store. Specifications: Length: 27 inches (686mm) Front Track: 11.81 inches (300mm) Rear Track: 11.81 inches (300mm) Ground Clearance: 0.59 inches (15mm) Weight: 8.6lbs (3.9 kg) (w/o batteries) Width (overall): 13.0 inches (329mm) Height (overall): 5 inches (127.5mm) Wheelbase: 15.9 inches (404mm) Shock Length: 3.3in (83mm) front, 3.4in (86mm) rear Front Tires (pre-glued): Belted slick 4.29in (109mm) x 1.7in (43mm) Rear Tires (pre-glued): Belted slick 4.29in (109mm) x 2in (51mm) Overall Drive Ratio: 9.36 (stock, out-of-box) Wheels (front & rear): 3.3in (84mm) Split-Spoke™ (black-chrome) with 17mm splined hex Overall Drive Ratio: 9.36 (stock, out-of-box) Battery Tray Dimensions: 155mm / 50mm / 29mm (adjustable height and length) Transmission: Single-speed with Cush Drive™ Differential Type: Sealed hardened steel bevel Gear Pitch: Module 1.0 Drive System: Shaft-Driven 4WD Receiver: TSM® Receiver (TRA6533) Servo: TRA2075 High Torque Waterproof Top Speed: 50+mph out of box; 100+mph with high-speed wing, speed gear, and Traxxas Link app unlock Skill Level: 10 Needed to Complete: (2) Traxxas iD® Power Cell LiPo batteries (LiPo, 3-Cell 5,000 mAh) Traxxas iD® LiPo Battery Charger (4) "AA" batteries (transmitter)  This product was added to our catalog on August 2, 2022

Read more less

Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit (Black, Purple or Red) The Yokomo SD 2.0 Super Drift 1/10 2WD RWD Drift Car Kit is welcomed into the drifting world with high expectations, with enough tuning capabilities to get lost in, this chassis is great for novice to adept level drivers. The SD 2.0 has been designed to dominate, whether you are leading or chasing this chassis will have you dragging bumper, flowing like water, and is sure to have you spinning brodies around the competition. The Yokomo SD 2.0 was designed to be one of the most customizable platforms out there the SD 2.0 lets you tune to your heart's desire. With a wide range of adjustability, this RWD platform offers the ability to make changes to suit changing track conditions or driver preferences. Using an updated two piece carbon main chassis the SD 2.0 includes two gearbox options, one three gear and one four gear. These two gearbox options change the direction of the motor allowing for different on-power throttle feel and traction. Additionally included are aluminum oil filled shocks, lightened slide rack steering setup with updated steering knuckles for an overwhelming cutting angle, aluminum shock towers, and updated high traction rear hubs giving the SD 2.0 premium high quality chassis components for precision driving feel and durability. If you are looking for a high quality, highly adjustable 2WD drift platform then look no further, the Yokomo SD 2.0 super drift RWD drift car is the kit for you! NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Updated steering blocks for overwhelming cutting angles Variable transmission with selectable 4 or 3 gears Differential height adjustments Rear bias servo mount Aluminum rear bulkhead Lightweight slide rack High traction rear hubs Split rear chassis Lightweight resin front bulkhead 30:70 weight distribution Specifications: Scale: 1/10 Length: 16.7in (425mm) Width: 7.7in (198mm) Wheelbase: 10in (256mm) Approximate Weight: 52.9oz (1500g) Drive: RWD Power Source: Electric  Gear Ratio: 1:2.6 Assembly Level: Kit Includes: (1) Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit Needed to Complete: (1) 2-3 Channel radio system (1) Electronic Speed Control (1) 540 Motor (1) Steering Servo (1) Drift Gyro (1) 2S (7.4V) LiPo battery (1) Compatible Battery Charger (1) Drift tires & Wheels (1) 200mm TC or Drift body (1) Polycarbonate paint for body Tools for assembly This product was added to our catalog on July 17, 2023

Read more less

ARA7612, Arrma Big Rock 6S BLX 1/7 RTR 4WD Electric Brushless Monster Truck w/SLT3 2.4GHz Radio Built on the proven 6S BLX platform and supersized to 1/7 scale, the ready-to-run Big Rock 6S BLX 4x4 blasts like only a large-scale Arrma RC monster truck can, especially when amped up with Spektrum brushless power and topped with an eye-catching crew cab body. Featuring loads of realistic scale details and "stealth" black-anodized aluminum parts, the Arrma Big Rock 6S BLX is big, fierce, fast, and tough. Its 6S LiPo capable brushless power system includes a highly efficient Spektrum Firma 2050kV brushless motor that's perfectly matched to a Spektrum Firma 150A Smart V2 waterproof ESC with IC5 connectors. The ESC has been updated to deliver more punch and an improved driving feel. Install the supplied, optional speed pinion, and the Big Rock 6S BLX can reach incredible 65+ mph speeds in optimum driving conditions. From the reinforced, black-anodized 6061-T6 aluminum chassis to the independent suspension with adjustable, aluminum-bodied, oil-filled shocks, the characteristically durable Arrma design lets you fearlessly tackle all terrain and all conditions. The metal drivetrain, steel driveshafts, and metal-geared Spektrum S665 digital steering servo all work together to bring out the full bashing potential of 6S brushless power. The Big Rock 6S BLX RTR's long, scale body marks the epitome of rugged truck style. An easy-to-use, clipless front body mount system preserves its incredibly detailed scale looks, and an integrated roll hoop and bed add more Arrma toughness. Massive, vented dBoots Ragnarok V2 tires on five-spoke wheels complement the scale looks, and the tires' aggressive tread gets the grip you need for high speeds and easy handling over a wide variety of surfaces. Assembled, finished, and complete with high-quality Spektrum SLT3 radio system, the Arrma Big Rock 6S BLX RTR requires only your choice of the recommended LiPo batteries and charger before delivering a big brushless performance with incomparable scale style. Features: Updated 6S LiPo capable Spektrum brushless power system All-metal differential outdrives and gearbox internals Heavy duty steel driveshafts throughout Center body support and brace for maximum durability Black anodized aluminum chassis Black anodized CNC-machined aluminum shock towers Oil-filled black anodized aluminum adjustable shocks Easy-to-use clipless front body mount system to preserve scale looks Integrated roll hoop and bed Detailed scale looks with three factory-finished body color choices Specifications: Completion Level: Ready To Run Scale: 1/7 Input Voltage: 4S-6S LiPo Battery Drivetrain: 4WD Motor Size: 4074-2050kV Pinion Gear: 13T Spur Gear: 50T Gear Pitch: 1.0MOD Length: 24.61" (625mm) Width: 18.31" (465mm) Height: 10.04" (255mm) Wheelbase: 16.61" (422mm) Weight: 14.33lb (6.5kg) without Battery Wheel Hex Size: 17mm Connector Type: IC5 Includes: (1) Big Rock 6S BLX 1/7 RTR 4WD Electric Brushless Monster Truck Product Manual Needed to Complete: LiPo Battery: (1) 4S Hard Case LiPo Battery with (IC5 or EC5) (1) 6S Hard Case LiPo Battery with (IC5 or EC5) (1) Compatible Charger (4) (AA) Batteries for Transmitter This product was added to our catalog on December 21, 2023

Read more less

PRODUCT FEATURES Are you ready for an adrenaline explosion? Fast and powerful, the Redcat Racing Volcano EPX is equipped with a 19T brushed 550 electric motor, waterproof electronic speed controller (ESC) and, thanks to its large aggressive tires, the traction needed to put all that power to the ground. The lightweight molded plastic chassis is designed to be durable, while providing a low center of gravity for high speed off road action. Speaking of durability, the Volcano EPX utilizes a 4WD shaft driven drivetrain with steel dogbone axles, and eight aluminum capped oil filled shocks. The Volcano EPX is fully adjustable and upgradeable. The shocks can be tuned with the included preload spacers or, for even more tuning options, you can buy different weight oils and springs . Tunable sealed differentials, and four wheel independent suspension, allow the driver to get loads of traction, on a multitude of surfaces. The Volcano EPX is also equipped with adjustable metal turnbuckles, so camber and toe angle can be fine tuned for the best performance possible. The Volcano EPX monster truck is a completely tunable hobby grade RC monster truck and comes pre-tuned for most driving situations. Many custom aftermarket parts are available for the Volcano EPX monster truck. These aftermarket parts include color anodized machined aluminum as well as many other performance options. Volcano EPX is erupting with excitement. Get yours today! • 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum capped oil filled shocks, front and rear gear differentials. • Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle. • Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout. • 19T brushed 550 electric motor with heat sink, Waterproof ESC, Waterproof high torque steering servo, 2.4GHz radio system. • Assembled & Ready to Run - Includes 7.2V 2000mAh NiMH Battery & NiMH Charger - Requires 4-AA Batteries for Transmitter

Read more less

ARA4305V3, Arrma Vorteks 4X4 3S BLX 1/10 RTR Brushless Stadium Truck (Green) w/2.4GHz Radio The Arrma Vorteks 4X4 3S BLX represents the highest level of speed and technology found yet in the proven tough ARRMA 4X4 platform. The Vortex 4x4 includes a 2S or 3S compatible Spektrum Firma 3200Kv brushless motor, and is a rocket right out of the box. Using a 3S LiPo battery and an optional pinion gear, it is the first ARRMA 4X4 3S BLX model capable of 60mph and more! The proven tough ARRMA 4X4 platform lets you bash at high speeds in almost any environment — off-road, on dirt and grass, on parking lots and over paved and asphalt surfaces. Its durability comes from a strong composite chassis featuring extended height dirt defenders, oil-filled shocks with silicone O-rings, metal geared differentials and more. Rugged bumpers and high-traction dBoots Katar tires mounted on tough, gun-metal colored wheels add to its unstoppable performance. The VORTEKS 4X4 3S BLX also includes a sleek, new stadium truck body with tough, injection-molded wing and protective roof skids. ARRMA adds the security of advanced Spektrum electronics to the VORTEKS Stadium Truck's speed and toughness to create a totally exhilarating bashing experience. With its included DX3 DSMR 2.4GHz radio system, SR6200A receiver and Firma 100A ESC, this is the first ARRMA 1/10 scale 4X4 model to provide the benefits of AVC (Active Vehicle Control) and Smart technology straight out of the box. With the AVC system's on-demand traction control, you can dial-in extra stability as needed to carve corners or nail jumps without backing off the power. You have full-throttle freedom over rough terrain, slick surfaces and loose dirt. When you don't want the extra traction, just dial back the stability. The DX3 radio's AVC system works behind the scenes, making hundreds of minute steering and throttle adjustments per second to keep the VORTEKS Stadium Truck precisely on the line you want to hold. Download the optional Spektrum Dashboard app to your mobile device — it's available free from the iPhone App Store and Google Play — to take full advantage of the Smart electronics' telemetry capabilities. Once you connect your mobile device wirelessly via Bluetooth to the VORTEKS Stadium Truck's DX3 transmitter, you can use it to view top speed, battery voltage and other essential data in real time (requires an optional BT2000 Bluetooth Module, available separately). Features: Stadium truck body with tough, injection molded wing and protective roof skids Adjustable body mounts High-traction, vented dBoots® Katar™ multi-terrain tires mounted to tough, gun-metal color wheels Spektrum™ 3660 3200Kv brushless motor with ARRMA® heatsink and cooling fan and Safe D pinion Spektrum™ Firma™ 100A Smart ESC Spektrum™ 2.4GHz DX3 transmitter and SR6200A receiver Smart radio system with AVC® (Active Vehicle Control®) Spektrum™ SPMS651 metal-geared servo Strong composite chassis with extended height dirt defenders Easy-access modular design Adjustable turnbuckles Steering system with stone clearance Adjustable ride height Wheelie bar Rubber shielded bearings throughout Durable 37T 1.35 module metal differential gears and silicone O-rings Castellated slipper pad and sliding gear mesh Plastic locknut for slipper 2-Year limited warranty; see website support for details. Double wishbone suspension front and rear Oil-filled shocks with silicone O-rings Specifications: Approximate Assembly Time: No assembly required Ball Bearings: Full set, rubber shielded Battery: Sold Separately Body: Painted, decalled and trimmed Brakes: Integral with ESC Chassis: Molded Composite Completion Level: Ready-To-Run Differential: 2 Gear Diffs Drivetrain: 4WD Final Drive Ratio: 9.03 Power Type: Electric Gear Pitch: 0.8m Internal Gear Ratio: 2.85 Motor Type: Brushless - Sensorless Pinion: 18T Product Height: 6.42" (163 mm) Product Length: 18.5" (470 mm) Product Weight: 6.49 lbs (2.95kg) Product Width: 13.31" (338 mm) Radio: Included Receiver: Included Scale: 1/10 Servos: Included Shock Type: Oil-Filled, Coil-Over Springs Speed Control: Included Spur Gear: 57T Suspension: Independent Vehicle Type: Stadium Truck Wheelbase: 11.3" (287 mm) Includes: (1) ARRMA® VORTEKS™ 4X4 3S BLX 1/10 Scale 4WD Electric Stadium Truck RTR (1) Spektrum™ Firma™ 100A Smart Waterproof ESC (1) Spektrum™ Firma™ 3660 3200Kv Brushless Motor (1) Spektrum™ 2.4GHz DX3 Smart DSMR® 3-Channel Transmitter (1) Spektrum™ SR6200A AVC® Receiver (1) Spektrum™ SPMS651 7kg Waterproof Metal-Geared Digital Servo (1) 23T Spline servo saver (1) Product Manual Needed to Complete: 2S or 3S 5000mAh 50C Hardcase LiPo Battery w/EC5 or iC5 connector (Maximum battery dimensions 156x51x48mm) Compatible Charger (4) AA Batteries LiPo Safe Charging Bag This product was added to our catalog on March 3, 2021

Read more less

YOKDP-YD2RTR-2, Yokomo YD-2Z 1/10 RWD RTR Electric Drift Car w/Supra Body (Red or White) Yokomo YD-2Z RWD RTR Drift Car with Supra Body Yokomo YD-2Z 1/10 2WD Ready-To-Run Drift Car with Supra Body. Designed to be a great budget and a beginner friendly option, making it the perfect platform for new hobbyists to get in drifting without sacrificing performance and can always upgrade their car as their skills grow! Based on the latest proven RWD drift YD-2Z platform with 90% or more of the parts being used in this car with plenty of optional replacement parts and performance upgrades already available! In addition, the aftermarket support for Yokomo drift platforms is second to none! Featuring fine tuned steering geometry that provides incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis, this Yokomo 1/10 2WD RTR Drift Car kit offers unmatched value! Features: Pre-Built RTR (Ready to Run) vehicle Upgradable chassis based on the latest model YD-2Z 2.4GHz radio system 27-turn motor for drifting Equipped with steering gyro Nickel-metal hydride 1600mAh battery AC quick charger PANDEM GR Supra Painted body Drift exclusive tires & wheels Specifications: Scale: 1/10 Completion Level: Fully assembled and ready-to-run Power Plant: Electric Motor: 27-Turn Brushed ESC: Brushed Length: 425mm Width: 198mm Height: 256mm Weight: 1500g Gear Ratio: 1:2.6 Includes: (1) YD-2Z 1/10 RWD RTR Electric Drift Car with Supra Body (1) 2.4GHz Transmitter and Receiver (1) 1800mAh Ni-MH Battery (1) Battery Charger (1) User Manual Needed to Complete: (4) AA Batteries for the Transmitter This product was added to our catalog on July 20, 2023

Read more less

58134-4, Traxxas Slash BL-2S 1/10 RTR 2WD Brushless Short Course Truck w/BL-2S ESC & TQ 2.4GHz Radio The Traxxas Slash 1/10 RTR Short Course Truck has been meticulously crafted for durability, performance, and pure enjoyment. Equipped with the formidable 3300kV brushless powerhouse and the rock-solid reliability of the BL-2S electronic speed control, the Slash fearlessly tackles every high-flying, fender-banging adventure you throw its way. Its water-resistant electronics ensure the fun continues even in wet weather. Grab your transmitter and brace yourself for thrilling dirt-roosting power slides. The Slash boasts a resilient design, built on the proven modular tub chassis featuring a fully independent suspension with heavy-duty steel turnbuckles for precise camber and toe adjustments. Powering its dynamic performance is the BL-2S 3300kV Brushless motor, seamlessly connected to the Traxxas Magnum 272 transmission. To keep those wheels spinning, heavy-duty Traxxas driveshafts ensure reliable power transfer, making every ride a thrilling experience! The resilient clipless body of the Slash steadfastly endures the most rigorous actions, secured by robust latches that tightly grip the frame. These heavy-duty latches, while holding the body securely, effortlessly release within seconds, granting swift access to the chassis. The ingenious hidden latching system of the Slash eliminates the need for cumbersome body clips, replacing them with sizable reinforced panels designed to withstand pull-through damage, ensuring durability and convenience. Features: Clipless body mounting system Fully adjustable steel turnbuckles Hardened steel metal gear Magnum 272 transmission Lightning-fast BL-2S 3300kV brushless motor delivers blistering speeds over 35MPH! Reliable Waterproof BL-2S Electronic Speed Control with three driving profiles 100% Fully assembled and Ready-To-Race Specifications: Scale: 1/10 Length: 22.4in (568mm) Width: 11.7in (296mm) Height: 7.60in (193mm) Wheelbase: 12.75in (324mm) Weight: 76.96oz (2181.7g) Power Source: Electric ESC Voltage: NiMH: 6-7 Cell NiMH (7.2-8.4V) LiPo: 2S LiPo (7.4V MAX) Drive: RWD Gear Pitch: 48P Gear Ratio: 2.72 (final drive: 12.58) Assembly Level: Ready To Run Includes: (1) Traxxas RTR BL-2S Slash (1) User Manual Needed To Complete: (1) 6-7 Cell NiMH Battery or 7.4V 2S Lipo Battery (MAX) (1) Compatible Battery Charger (4) AA Batteries for Transmitter This product was added to our catalog on September 27, 2023

Read more less