Products
Futaba 01102161-1, Futaba, GYC441 All-Purpose Car Gyro
01102161-1, Futaba, GYC441 All-Purpose Car Gyro
$89.99
Futaba 01102213-1, Futaba, SBS-01T Temperature Sensor
01102213-1, Futaba, SBS-01T Temperature Sensor
$69.99
Futaba 01102289-1, Futaba, SBS-01V External Battery Voltage Sensor
01102289-1, Futaba, SBS-01V External Battery Voltage Sensor
$49.99
Associated Electrics 31510, Screws, M2x0.4x4 mm BHCS
31510, Screws, M2x0.4x4 mm BHCS
$4.99
Associated Electrics 42026, Stealth(R) X Idler Gear Set
42026, Stealth(R) X Idler Gear Set
$12.99
Sweep Racing 443025, Sweep MAX FORWARD MEDIUM FOAM TIRES for GT8 17mm HEX 2pcs set
Sweep Max Forward 17mm Hex 1/8 Mounted GT Foam Tires have been specially developed for 1/8 scale drag racing and speed run applications. These pre-mounts feature a specially designed wheel, and high density foam that have been bonded using a proprietary process that eliminates the need for further balancing. This creates a tire that is perfectly trued, and perfectly balanced, so they are ready to rip right out of the package.Features: MAX-FLAT Wheels: This wheel is specially made ONLY for Drag racing/Speed runs. This is not an off-road buggy wheel that will squat at the launch and wobble at the finish line. Flat face 17mm hex wheel with a 1mm edge that protects tires while side by side racing. Foam: Made out of race proven high density foams, that is long lasting and durable yet provides high traction. Gluing/Mounting Process: Each wheel and tire is mounted on a special machine, and have been sanded and trued to perfection by people with decades of experience in foam tires fabricating. Requires no further balancing. Finished product: MAXIMUM grip, LONGER LIFE TIRES! Race at your own risk! Compound Applications: X-HARD: Recommended for 90deg F to hotter, or SPEED RUNS HARD: Recommended for 85F or higher MEDIUM: Recommended for 70deg-90deg F SOFT: Recommended for temps below 70deg, or when maximum grip is desired Specifications:Weight: 80-86 grams (approx.)Diameter: 105mmWidth: 45mmApplication: 1/8 drag racing & speed run
$48.00$38.00
Sweep Racing 444025, Sweep MAX FORWARD X-HARD FOAM TIRES for GT8 17mm HEX 2pcs set
Sweep Max Forward 17mm Hex 1/8 Mounted GT Foam Tires have been specially developed for 1/8 scale drag racing and speed run applications. These pre-mounts feature a specially designed wheel, and high density foam that have been bonded using a proprietary process that eliminates the need for further balancing. This creates a tire that is perfectly trued, and perfectly balanced, so they are ready to rip right out of the package.Features: MAX-FLAT Wheels: This wheel is specially made ONLY for Drag racing/Speed runs. This is not an off-road buggy wheel that will squat at the launch and wobble at the finish line. Flat face 17mm hex wheel with a 1mm edge that protects tires while side by side racing. Foam: Made out of race proven high density foams, that is long lasting and durable yet provides high traction. Gluing/Mounting Process: Each wheel and tire is mounted on a special machine, and have been sanded and trued to perfection by people with decades of experience in foam tires fabricating. Requires no further balancing. Finished product: MAXIMUM grip, LONGER LIFE TIRES! Race at your own risk! Compound Applications: X-HARD: Recommended for 90deg F to hotter, or SPEED RUNS HARD: Recommended for 85F or higher MEDIUM: Recommended for 70deg-90deg F SOFT: Recommended for temps below 70deg, or when maximum grip is desired Specifications:Weight: 80-86 grams (approx.)Diameter: 105mmWidth: 45mmApplication: 1/8 drag racing & speed run
$39.50
Futaba 7PXR - R334SBS (#01004395-3) - Transmitter Systems, Surface Systems
7PXR Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004395-3) (01004396-3) FEATURES FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.) UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication. INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions. BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently. GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR. TANK MIXING:This function is intended for vehicles such as tanks. CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating. DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set. WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type. TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided. LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed. VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. CONTENTS YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS: -T7PXR Transmitter -R334SBS OR R334SBS-E Receiver -Dry Battery Holder -Wheel Offset Adapter -Wheel Adapter 32deg -Large Diameter Steering Wheel (54 mm) -Trigger Brake Lever (Narrow Type) -Miniature Screwdriver -Screen Protector -3 x Receiver Plugs TRANSMITTER SPECS WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2 POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V) CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on) TRANSMITTING ANTENNA:1/2λ dipole 4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. RECEIVER SPECS R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V R334SBS-E T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.2 g0.25 oz OPERATING VOLTAGE:DC 3.7V-7.4V
$699.99
Futaba 7PXR US Limited Edition - R334SBS (01004407-3)
7PXR US Limited Edition Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004407-3) (01004406-3) FEATURES FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.) UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication. INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions. BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently. GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR. TANK MIXING:This function is intended for vehicles such as tanks. CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating. DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set. WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type. TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided. LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed. VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. CONTENTS YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS: -T7PXR Transmitter -R334SBS OR R334SBS-E Receiver -Dry Battery Holder -Wheel Offset Adapter -Wheel Adapter 32deg -Large Diameter Steering Wheel (54 mm) -Trigger Brake Lever (Narrow Type) -Miniature Screwdriver -Screen Protector -3 x Receiver Plugs TRANSMITTER SPECS WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2 POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V) CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on) TRANSMITTING ANTENNA:1/2λ dipole 4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. RECEIVER SPECS R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V R334SBS-E T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.2 g0.25 oz OPERATING VOLTAGE:DC 3.7V-7.4V
$699.99
Associated Electrics 91047, Heavy-duty Ballstuds, 6 mm, long neck
91047, Heavy-duty Ballstuds, 6 mm, long neck
$15.99
Associated Electrics 91049, Heavy-duty Ballstuds, 10 mm, long neck
91049, Heavy-duty Ballstuds, 10 mm, long neck
$16.99
Associated Electrics 91560, FT Bearings, 5x10x4 mm
91560, FT Bearings, 5x10x4 mm
$8.99
Associated Electrics 91609, FT Clamping Wheel Hexes, 5.0 mm offset
91609, FT Clamping Wheel Hexes, 5.0 mm offset
$16.00
Associated Electrics 91611, Screws, M1.6x5 mm SHCS
91611, Screws, M1.6x5 mm SHCS
$3.99
Associated Electrics 91667, RC10B6 Steering Set
91667, RC10B6 Steering Set
$6.99
Associated Electrics 91670, RC10B6 Hinge Pin Set
91670, RC10B6 Hinge Pin Set
$9.99
Associated Electrics 91682, RC10B6 Front Axles
91682, RC10B6 Front Axles
$12.99
Associated Electrics 91776, RC10B6.1 Caster and Steering Blocks
91776, RC10B6.1 Caster and Steering Blocks
$12.99
Associated Electrics 91859, RC10B6.2 CVA Axles, +2mm
91859, RC10B6.2 CVA Axles, +2mm
$13.99
Associated Electrics 92179, Rear Hub Insert Set
92179, Rear Hub Insert Set
$5.99
Team Associated ASC21563, Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set
ASC21563, Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set This is an optional Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set, intended for use with the Reflex 14B 1/14 electric buggy kit. Includes: (1) Metal ring gear (1) Metal pinion gear This product was added to our catalog on January 29, 2021
$9.99
Associated Electrics ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead
ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead This product was added to our catalog on December 16, 2021
$26.99
Associated Electrics ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)
ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available separately. Great for all 1/10 scale vehicles. This product was added to our catalog on April 28, 2021
$9.99
Team Associated ASC71185, RC10SC6.4 FT Chassis Protective Sheet, Printed
Whether you race indoor or outdoor, protecting your chassis from premature wear will improve its lifespan and help maintain performance. These Factory Team pre-cut chassis sheets are made from adhesive-backed 18-mil vinyl and offer a protective surface while looking trick with intricate details for that Factory Driver look.This part fits the following vehicles:RC10SC6.4
$14.49
Associated Electrics ASC72032, Team Associated DR10 V2 12x27.5mm Threaded Rear Shock Kit
ASC72032, Team Associated DR10 V2 12x27.5mm Threaded Rear Shock Kit 12x27.5mm Shock Kit V2, for DR10, SR10 & RB10 Featuring hard anodized threaded bodies, machined Delrin pistons, TiN-coated shafts, and low-friction X-Rings, these shock kits will transform the performance and look of your DR10, SR10, RB10, or any other compatible vehicle. Team Associated's proven race shock construction ensures a leak-free, silky smooth operating shock, time after time. These 12mm complete shock kits can replace your stock RTR shocks. Kits contain parts for two shocks. Springs are not included. Shocks for both front and rear on DR10 Shocks for the rear of the SR10 and RB10 #72032 contents: qty 2 12mm Shock Spring Cups qty 2 12mm Shock Spring Cups qty 2 12mm Shock Spring Cups qty 2 12mm Shock Caps V2 qty 2 Shock Rod Eyelets (Short) qty 2 Shock Rod Eyelets (Long) qty 1 12mm Big Bore Shock Tool qty 1 DR10/SR10 V2 Shock Set qty 2 TC Shock Bottom Cap O-Rings V2 qty 4 Nylon Washers [3.27x5.5x1.0mm] qty 4 12mm Threaded Collar O-Rings qty 2 12mm Shock O-Ring Spacers V2 qty 4 12mm Shock O-Ring Hat Bushings qty 4 Clear Silicone X-Rings qty 2 12mm Machined Shock Pistons V2 qty 2 12mm Machined Shock Pistons V2 qty 2 12mm Machined Shock Pistons V2 qty 2 3x27.5mm V2 Shock Shafts (TiN) qty 2 12mm Shock Bottom Caps, V2 qty 2 12mm Threaded Shock Collars qty 2 12x27.5 Threaded Shock Bodies V2 qty 2 Shock Pivot Balls qty 2 Steel Washers [2.6x0.5x6mm] qty 4 Screws, M2x0.4x4mm BHCS Item Added To Our Catalog On: 09/13/2021
$64.99
Team Associated ASC7662, Team Associated 32P Spur Gear (81T)
ASC7662, Team Associated 32P Spur Gear (81T) Team Associated 32 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on OCTOBER 5, 2023
$6.00
Associated Electrics ASC91466, Team Associated Diff & Idler Gear Set
ASC91466, Team Associated Diff & Idler Gear Set Team Associated Diff & Idler Gear Set. Package includes replacement gear diff case, and idler gear. This product was added to our catalog on April 26, 2021
$17.99
Associated Electrics ASC91853, RC10B6.2 Team Associated RC10 B6.2D 73mm Rear Suspension Arm (2)
91853, RC10B6.2 Rear Suspension Arms, 73mm
$9.99
Associated Electrics ASC9653, Team Associated 48P Spur Gear (81T)
ASC9653, Team Associated 48P Spur Gear (81T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on January 29, 2022
$6.00
Team Associated ASC9654, Team Associated 48P Spur Gear (87T)
ASC9654, Team Associated 48P Spur Gear (87T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on January 29, 2021
$6.00
BXR BXRC1016, Foam Dirt Oval Rear Mount Tires, Pink
BXRC1016, Foam Dirt Oval Rear Mount Tires, Pink
$24.99
BSR BXRC1017SPEC, 1/10 Front Spec Foams, Dbl Pink
1/10 Front Spec Foams, Dbl Pink
$22.99
BXR BXRC1018, Foam Dirt Oval Rear Mount Tires, Double Pink
BXRC1018, Foam Dirt Oval Rear Mount Tires, Double Pink
$24.99
BXR BXRC1018SPEC, 1/10 Rear Spec Foam Tires, Double Pink
BXRC1018SPEC, 1/10 Rear Spec Foam Tires, Double Pink
$24.99
BSR BXRC1023, Foam Dirt Oval Front Mounted Tires, Orange
Foam Dirt Oval Front Mounted Tires, Orange
$22.99
BSR BXRC1024, Foam Dirt Oval Rear Mounted Tires, Orange
BXRC1024, Foam Dirt Oval Rear Mounted Tires, Orange
$24.99
BXR BXRC1025, Foam Dirt Oval Front Mounted Tires, Red
BXRC1025, Foam Dirt Oval Front Mounted Tires, Red
$22.99
BXR BXRC1026, Foam Dirt Oval Rear Mounted Tires, Red
Foam Dirt Oval Rear Mounted Tires, Red
$24.99
BXR BXRC1027, C.W. Dirt Foam, Green, Front
BXRC1027, C.W. Dirt Foam, Green, Front
$22.99
BXR BXRC1028, C.W. Dirt Foam, Green, Rear
C.W. Dirt Foam, Green, Rear
$24.99
Futaba CIU-3-USB Interface For Communication Between Link-Supported Devices (01102291-1)
CIU-3-USB Interface For Communication Between Link-Supported Devices (01102291-1) INTERFACE:USB Rev 2.0 Compliant USB CONNECTOR:USB Series A Connector DIMENSIONS:18.2 mm x 56.5 mm x 9.0 mm0.72 in x 2.22 in x 0.35 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:5.0 V ± 0.2 V (USB Bus Power) OPERATING ENVIRONMENT:Temperature -10 ~ 45° C CURRENT DRAIN (AT CONNECTION, IDLE):5.8 ± 1.7 mA APPLICABLE OS:Windows 10 / 8 / 7 / Vista A PC-LINK ADAPTER (DOUBLE EXTENSION CORD K500) IS SUPPLIED WITH CIU-3
$49.99
Exotek ETK2024, 22S Drag Motor Plate, Slotted Lightweight
ETK2024, 22S Drag Motor Plate, Slotted Lightweight
$15.95
Exotek ETK2029, 22S Rear Hd Hub Set, 1Pr 7075 Black W/ Silver
ETK2029, 22S Rear Hd Hub Set, 1Pr 7075 Black W/ Silver
$35.95
Exotek ETK2058, 22S Drag Mk3 Slipper Set, 3 Pad Finned Slipper Set
ETK2058, 22S Drag Mk3 Slipper Set, 3 Pad Finned Slipper Set
$42.95
Exotek EXO1940, 2WD Slash Eliminator Pro Spur Mount, for Kimbrough Spur Gear
EXO1940, 2WD Slash Eliminator Pro Spur Mount, for Kimbrough Spur Gear Features: Heavy duty yet light weight slipper eliminator spur gear mounting hub for all 1/10 Traxxas 2wd Slash and Bandit buggies and trucks. Only weighing 2.7gr, this mount deletes the slipper components, cuts out about 10gr and allows greater gearing selection for speed runs and dragster set ups. This mount uses Kimbrough on road spurs, Exotek Flite Spurs or similar on road spurs that have a 6 bolt pattern and inner hole diameter of 9.5mm.
$15.95
Exotek EXO1978, Carbon Fiber Adjustable Wheelie Bar Set, Single Wheel, fits Slash
EXO1978, Carbon Fiber Adjustable Wheelie Bar Set, Single Wheel, fits Slash Extra long adjustable carbon fiber wheelie bar for 2wd Slash or Bandit 2wd street eliminator cars. Extends from 9.5" to 12.5" (axle to axle) to match NPRC race class rules. The longer bar gives you more stability, for straighter and faster passes without needing to let off the throttle as often. You are able to finely adjust the wheel height via the 4mm turnbuckle or make large adjustments by adding spacers under the wheel (M3 spacers not included). Made of heavy duty 3mm carbon fiber with alloy turnbuckles and mounts and includes a ball raced machined alloy wheel with oversized rubber o-ring tire.
$59.99
Exotek EXO2025, 22S HD Front Pivot, 7075 Black with Silver
EXO2025, 22S HD Front Pivot, 7075 Black with Silver Heavy duty, 7075 alloy constructed front bulkhead for the LOSI 22S Drag and SC.Machined to be heavy duty, weighs 16gr and retains the stock geometry of the kit plastic pivots.Customized polished black base with silver chamfered accents goes great with your stock plastic parts or factory alloy parts.
$23.00
Exotek EXO2030, 22S HD Steering Set, Full Bearing Style, 7075 Black and Silver
EXO203022S HD Steering Set, Full Bearing Style, 7075 Black and Silver Precision pro style steering set for the Losi 22S series.Designed with a beefier structure and engineered to have the most precision thanks to the robust 7075 alloy design that incorporates an additional 4 bearings to connect the steering drag link, instead of the nylon cup, which now eliminates all flex and slop.Also includes crush sleeves that go between the bearings, which help prolong the bearing life and maintains precise fit and operation of the rack.
$42.00
You have seen 48 out of 152 products